IMPORTANTE:
- In this article, only versions 5.60.23.3 and earlier are available. To check the current version, click here.
- For more information on older versions of Promob, click here.
- To consult the news made available on Decore Online, click here.
Check below for previous versions of Promob:
▼ 5.60.23.3
Date: 11/30/2023
- Corrections
1. Corrected the situation in which a unconformity was displayed when performing batch printing with two or more printing pages attached to the project.(2050202)
▼ 5.60.26.1
Date: 11/28/2023
- Corrections
1. Corrected the situation in which a unconformity was displayed when performing batch printing with two or more printing pages attached to the project.(2050202)
▼ 5.60.26.0
Date: 11/27/2023
- Enhancements
Automatic Rescue
1.The Autosave file is now saved every hour, and the latest saved versions of the project are displayed by clicking on Show autosave versions available on the History tab of the Project Details. For more information click here.
Free Subscription
1. Implemented a limit on the use of some features in Free Subscription Promob . For more information click here.
- Corrections
System infrastructure
1. Optimized the size of some local system folders (2049346)
Budget
1. Corrected the situation in which when attaching more than one budget to the same project, the file would show corrupted. (2049892)
Wall Builder
1. Corrected the situation in which a unconformity was displayed when deleting wall vertices. (2017253)
Find materials fast
1. Fixed the situation where some materials that are hidden were improperly displayed in Quick Find. (2045429)
▼ 5.60.23.10
Date: 10/23/2023
- Corrections
Printing page
1. Fixed a situation where Promob stopped responding to commands when adjusting the viewport. (2048900)
2. Fixed the situation where a non-conformity was displayed when adjusting a locked viewport. (2051272)
Budget1. Fixed situation where items were displayed without a price. (2052601)
▼ 5.60.23.3
Date: 10/03/2023
- Enhancements
Budget
1. In projects of the project auditor type when generating a budget, the mandatory fields will not be validated even if they are registered.
▼ 5.60.21.6
Date: 09/29/2023
- Enhancements
Budget
1. In projects of the project auditor type, when generating a budget, the mandatory fields will not be validated even if they are registered.
▼ 5.60.23.2
Date: 09/29/2023
- Enhancements
Budget
1. In projects of the project auditor type when generating a budget, the mandatory fields will not be validated even if they are registered.
▼ 5.60.23.0
Date: 09/27/2023
- Enhancements
Promob Gallery
1. Added Promob Gallery tab to the Connect tab. The Promob Gallery allows you to create a virtual showcase that inspires, presents references and trends by sharing the talent and knowledge of Promob users expressed in designs renderings. For more informations, click here.
Technical assistance
1. Assistance option budget generation for unavailable items. For more information click here.
- Corrections
1. Fixed the situation where Quotas lost their accuracy when generating a PDF file. (1992705)
2. Fixed the situation where when locking Viewpoint the lines are thick. (2013319)
3. Fixed the situation where, when entering Models information on a print page, the final information was not consistent with what was displayed in the Properties menu and in Models Information Configuration. (2009861)
3D Space
1. Fixed the situation in which a unconformity was displayed when organizing modules and materials in alphabetical order. (1952643)
2. Corrected the situation in which it was not possible to resize the Model Information Configuration screen.
Rendering
1. Fixed the situation whereby when starting the rendering of a project, it was no longer displayed and a new 3D environment was generated. (2015849)
Budget
1. Corrected the situation in which when generating a budget with the Only selected items option in Promob and integrating it with 2020Manager, the project was not sent completely, loading only the item selected in the negotiation. (2026758)
▼ 5.60.21.3
Date: 09/13/2023
- Corrections
Budget
1.Fixed situation where items were displayed without value in the budget. (2036306)
▼ 5.60.21.2
Date: 08/16/2023
- Corrections
Send To
1. Fixed instability in the Send To menu.
▼ 5.60.20.6
Date: 08/16/2023
- Corrections
Send To
1. Adjusted the behavior of saving the project when executing Send To.
2. Fixed the situation where the project version ID in the budget XML was not updated when executing Send To.
▼ 5.60.21.1
- Enhancements
Free Subscription
1. Some features have been restricted from the free subscription version, these are: Import Projects, Export Projects, Print Projects, Send To and Print Estimate and Change the Watermark of the render, for more information click here.
Saving projects
1. Project autosave option available. For more information click here.
Portfólio
1. The Project Portfolio is available, is a collection of renders, which result in a visual showcase of the professional's skills, style and experience. Renders can be selected, uploaded and managed by each Promob user, i.e. each user has their own Portfolio.For more information click here.
Deactivate License
1. The Deactivate License option is not available in Promob Academic. For more information click here.
- Corrections
1. Fixed the situation where modules were displayed unconfigured in the 3D environment. (2016779)
2. Fixed the situation where when changing the module's depth, the sides were not resized. (2007483)
3. Fixed the situation where the Draw only outline box option in Preferences was not working. (1964216)
Real Scene
1. Corrected the situation in which when rendering the nonconformity was displayed Accessor property 'XComponent'. (1981810)
Closets Builder
1. Reprocessing Drawers in the Cabinet Builder was not functioning correctly. (1985037)
Join
1. Fixed the situation where, when using the Module Join option, upon separating the modules, the sides and back did not change dimensions. (1985574)
Favorites
1. Fixed the situation where an inconsistency was displayed when adding Favorites. (1990514)
Performance
1. Fixed the situation where Promob had low performance when closing with open projects. (1996835)
Login
1. Fixed the situation where when using Downloader,Update,or activating Promob, the message This host is not recognized/not a valid host was displayed. (2011184)
Models
1. Fixed the situation where even when marking the Invisible Model option, the item was displayed for selection in the models tab. (1977074)
▼ 5.60.20.5
Date: 08/10/2023
- Corrections
SendTo
1. Corrected a situation in which an inconformity occurred when using the SendTo command, in a Budget attached. (2009939)
2. Corrected the situation in which an inconformity occurred when using the SendTo command in a project with special characters in the name.
3. Corrections have been made to the translations for the SendTo command.
4. Adjusted the situation to prevent the SendTo command from being executed again after the process is canceled.
▼ 5.60.20.4
- Corrections
Budget - Send To
1. Fixed a situation in which the processes in the Budget Send To menu were performing poorly.
▼ 5.60.20.1
Date: 07/10/2023
- Enhancements
Promob
1. Added an option for Insertion Automatic of Tops. For more information, click here.
2. Added Save as New Option button, with the functionality to create a new project option. For more information, click here.
Budget
1. Added functionality Buy Online, which allows purchases to be made in a practical and efficient manner. For more information, click here.
- Corrections
3D Space
1. Fixed the situation where all walls were selected when using the Ctrl+T shortcut (select all entities). (1976798)
Features Configurator
1. Fixed the situation where the Feature Configurator labels were not in the correct order. (1934168)
▼ 5.60.19.5
Date: 06/30/2023
- Corrections
Budget
1. Fixed the situation where the files generated by the Send to function were not registered via Catalog.
▼ 5.60.19.4
- Enhancements
Modulation
1. Adjustment made when inserting fronts, openings and modules. Now when inserting (fronts and modules) in another module or geometry, the dimension of the (front/module) being inserted adjusts to the size of the gap or geometry.
▼ 5.60.19.2
- Corrections
1. Fixed a situation where a unnconformity was generated when opening the Features Configurator. (1986203)
▼ 5.60.19.1
- Corrections
1. Fixed situation where viewport lines were opaque (1991781)
▼ 5.60.19.0
- Corrections
1. Fixed the situation where model information containing special characters was not sent correctly for printing. With the correction the special characters will be sent correctly to the print screen. (1938881)
▼ 5.60.18.2
- Corrections
▼ 5.60.18.1
- Corrections
▼ 5.60.17.35
- Corrections
▼ 5.60.18.0
Date: 04/13/2023
- Enhancements
Budget
1. Inserted description with the name of the module in the budgeted items of Decore.
Promob Worker
1. Added compatibility with Connect V2 in Promob Worker.
- Corrections
Properties
1. Fixed the situation where the Context Menu was not updated when changing the MODELTYPE of the item.
3D Space
1. Fixed the situation where the Undo command did not work correctly when applied to walls. (1954039)
2. Fixed the situation where hardware was positioned incorrectly when duplicating a module. (1933154).
3. Fixed the situation where the visibility condition with decimal numbers did not work correctly. (1930348).
Door Editor
1. Fixed the situation in the Door Editor, where some fields remained with the default value and did not operate correctly. (1958289)
1. Fixed the situation where printing did not work correctly. (1974041, 1975022 e 1974952)
2. Fixed the situation on the print page where the behavior of the numeric indicator was disproportionate. (1956927)
Menu
1. Fixed the situation where information was missing on the portal page when clicking on the Help - Support - Send computer information menu. (1925201)
2. Fixed the situation where unconformity was displayed when sending computer information in the Help - Support - Send computer information menu. (1936953)
1. Fixed a situation where geometries were not quoted correctly in the budget. (1948758)
1. Fixed situation where the behavior of the junctions worked improperly. (1919256)
Cabinet Builder
1. Corrected the situation where an unconformity was generated when inserting multiple divisions. (1959255)
2. Fixed the situation where when applying doors in Cabinet Builder, one of the doors was not inserted. (1949477)
Favorites
1. Fixed situation where an unconformity was generated and the favorites browser was blank when registered groups/ favorites with spaces at the start/end on the Add Favorites screen. (1958686)
Budget
1. Fixed the situation where listings were saved with generic name. (1944912)
▼ 5.60.17.34
- Corrections
Listing
1. Fixed the situation in which the project (.promob) was not included in the compressed file (.zip) when the budget was generated in Send To - Package.
2. Fixed the situation where the project (.promob) was saved multiple times when generating a Package.
3. Fixed the situation where even with the option enabled, Promob did not request the local folder to save the Package. (1982600)
▼ 5.60.17.33
- Corrections
Budget
1. Fixed the situation in which the project (.promob) was not included in the compressed file (.zip) when the budget was generated in Send To - Package.
▼ 5.60.17.32
Date: 03/28/2023
- Corrections
3D Environment
1. Fixed situation where an inconsistency was displayed when moving modules joined with dynamic joins. (1976733)
▼ 5.60.17.30
Date: 03/22/2023
- Corrections
Print Page
1. Fixed the situation where after printing or generating PDF, Promob stopped responding unexpectedly. (1974952)
2. Fixed situation where Viewport did not consider the lock function and automatically updated. (1974041)
▼ 5.60.17.29
- Corrections
Print Page
1. Fixed a situation where the pictures on the print page were gray when opening the project. (1966680)
▼ 5.60.17.27
- Corrections
Closets Builder
1. Fixed situation that occasionally occurred where Closets Builder items registered in the library were inserted in the 3D environment with incorrect format and/or with missing parts.
▼ 5.60.17.26
- Corrections
Counter Top
1. Fixed situation where it was not possible to apply templates to the counter top inserted by the Counter Top Editor.
▼ 5.60.17.25
- Corrections
Opening Promob
1. Fixed the situation where some files were not read when opening Promob.
▼ 5.60.17.24
- Enhancements
Print page
Printing Page 1. Now, when generating a listing in the print view, upon updating the listing, it is regenerated based on the changes made in the 3D environment. For more information, click here.
Corrections
Print page
1. Corrected the situation where an inconsistency occurred when generating technical drawing for elements without parent entity reference. (1898351)
3D Environment
1. Fixed situation where panel insertion via mouse drag was not inserted at the desired/displayed position in the green lines. (1903067)
Budget
1. Fixed situation where the $P.UNIQUEID$ assembly was not resolved in the budget XML. (1935794)
Features Configurator
1. Fixed situation where the Dimension Configurator tags were not in the correct order. (1934168)
Closets Builder
1. Fixed issue where assembly $SMultiplicityIndex$ was not resolved for Divisions. (1947755)
▼ 5.60.17.22
-
Corrections
▼ 5.60.16.100
- Enhancements
1. Optimized Promob opening time.
▼ 5.60.17.20
-
Corrections
▼ 5.60.17.19
-
Corrections
▼ 5.60.16.99
Date: 11/23/2022
- Enhancements
Integration with 2020 Manager
1. Improved the 2020 Manager integration process to ensure that when opening the site the integration is ready.
▼ 5.60.17.14
- Enhancements
1. Exclusive tool made available for use by Promob Support to assist in customer service.
- Corrections
Attributes
1. Fixed the situation where the KEEPPARENTMODEL attribute did not cause the child to inherit the parent's model. (1905161)
Client's data
1. Fixed situation where when creating/opening a new project the customer data was from the previous design.
Print
1. Fixed situation where it was not possible adjust the text size of the symbologies. (1915906)
2. Fixed the situation where the notes field was not updated with the values entered in the field.
Browser
1. A palliative fix was made available for the situation where the items were not displayed in the Modules tab, if the registered folder name had spaces at the beginning or end of the text inserted in the Catalog registration. To definitely fix it is necessary to remove the spaces from the directory.
3D Space
1. Fixed situation where the conditions for applying color/texture to a material were not applied through the properties window.
2. Fixed situation where the Opening tool was not displayed. IMPORTANT: Items where the opening option is not yet displayed, it is necessary to reinsert the item. (1907457)
3. Fixed situation in which after opening a project from another Factory, the projects opened later came with modules marked as module unavailable. (1907184)
4. Fixed the exception thrown when trying to insert linear geometry into a wet area. (1913821)
5. Fixed situation where selected models in a project were kept when opening a new project. (1905627, 1916400)
Integration with 2020 Manager
1. Fixed situation in which during the integration processing caused the 2020 Manager website to fail.
Closets Builder
1. Fixed the situation where the bottom of the closet was incorrectly divided with partitions of different sizes. (1904178)
▼ 5.60.17.11
Date: 11/10/2022
- Enhancements
.NET Framework 4.8
1. Added support for .NET Framework 4.8.
Wall editor
1. Added option to disable automatic quotas in the Wall Editor.
Technical assistance
1. Added Technical Assistance Request functionality.
Enable/Disable Midpoint
1. Added option to disable quotas middle-point on print page.
- Corrections
Connect 1.0 / Worker
1. Fixed situation where customer data was not loaded when using Connect v1 or Worker.
Maker
1. Fixed the situation where when changing the selected company in Maker, the settings were not reloaded. (1802543, 1893997)
Print
1. Fixed the situation where the print page margins were not updating correctly.
2. Fixed the situation in which the description of online/decorate items was not shown in the print page listing. (1883023)
3. Fixed the situation where the print listing items kept the edited values of the notes field. Now when updating the item, the value is retrieved from the 3D environment. (1880793)
4. Fixed situation where it was possible to save a printing prototype with automatic documentation already processed. (1895107)
5. Fixed situation where the notes field was not available on the print page.
Data
1. Fixed the situation where customer data remained from the first open project, but did not update in subsequent projects.
Floor
1. Fixed the situation of adjusting the floor when finishing the construction of walls, through the wall editor, enabling the option Cut Floor at Finish.
Modulation
1. Fixed situation where a favorite module of Cabinet Builder was inserted duplicate. (1884496)
Wall Editor
1. Fixed the situation where the dimensions in the Wall Editor were displayed incorrectly. (1871403)
Features Configurator
1. Fixed the situation where there was a misconfiguration in the Features Configurator, when opening a project made on another system.
Budget
1. Fixed situation where the budget was without price with some types of XSL.
2. Fixed the situation where furniture that was not remote was sent for quote. Now, if the furniture is not registered/marked as a remote quote, it is no longer sent to be quoted remotely. (1880923)
3. Fixed situation where when generating budget with mirrored modules, some aggregates had their incorrect position. (1886388)
Sizing
1. Fixed the situation in which, if formulas with proposed values were registered in the furniture dimensioning, it was not calculated for display/insertion. (1883778)
Geometry
1. Fixed situation where when generating budget with mirrored modules some aggregates were in the wrong position. (1886388)
2. Fixed a visual issue where when adding 45 degree faces to a geometry, those faces were not displayed in the 3D environment. (1892726)
Model
1. Fixed the situation where the model was not applied to aggregates added by repetition. (1887014)
Closet builder
1. Fixed situation where the cabinet builder window opened with the wrong size.
Translation
1. Fixed situation where the translation with some Decore models was incorrect. (1871753)
▼ 5.60.16.99
- Enhancements
Integration with 2020 Manager
1. Provided improved performance in the processing of the 2020 Manager negotiation.
▼ 5.60.16.98
- Enhancements
1. It is possible to define whether the limits of the floor will be considered in relation to the ends of the built walls, or if they will be considered in relation to the ends of all items that are outside the limits of the walls. For more information click here.
- Corrections
1. Fixed a situation where registered modules were not displayed for selection on the Closets Builder screen. (1899928)
▼ 5.60.16.97
- Corrections
1. Fixed situation where information entered in the Notes field in Connect 2.0 was not sent to the print page. (1896948)
Open
1. Fixed situation where Script Error message was displayed when opening or creating a project. (1876205)
▼ 5.60.16.92
- Corrections
1. Corrected situation where budget was not generated when there were geometries/decorations budgeted. (1880923)
Model
1. Corrected a situation where changing the module model returned the default aggregates to the environment (1894364 and 1893571)
▼ 5.60.16.90
- Corrections
▼ 5.60.16.89
- Corrections
▼ 5.60.16.88
- Corrections
▼ 5.60.16.86
- Enhancements
- Corrections
1. Fixed the situation where when inverting modules with Linear Light Inserts, the position of the linear light was incorrect. The situation occurred in a specific custom library. (1571702)
▼ 5.60.16.85
- Corrections
Autosave
1. Fixed the situation where automatic saving was not performed when the project name had special characters. (1861539)
1. Fixed situation where the print window was improperly displayed small in some screen resolutions. (1870718)
2. Fixed the situation where an inconsistency was displayed on the Print screen when selecting some items on the Insertion Wizard screen.
3. Fixed situation that when editing the listing and generating indicators on the print page, some items disappeared from the listing. (1846698)
Features Configurator
1. Fixed situation where it was not possible to change/enter values in the Features Configurator using Decimal Inch, Fractional Inch or Feet units of measure. (1868756)
Modules
1. Corrected the situation where the calculation of dimension occurred incorrectly in counter doors with corner L. (1861573)
2. Fixed the situation where when inserting an item in the 3D environment with orthogonal view, the item was inserted with offset improperly. (1871247)
3. Fixed the situation where the Adjust Depth option did not work correctly where items registered to fill the space with repetition, the repetition did not work to fill the depth. (1864457)
4. Fixed the situation on the Modules tab, where when changing the order of a library randomly and saving, the libraries were displayed multiplied. (1847635)
5. Fixed situation where some online items locked to resize allowed resizing the item.
Budget
1. Fixed situation where unconformity was displayed when using the Prepare Negotiate or Negotiate functions when the project is not saved.
Closets Builder
1. Fixed situation where templates of a selected composition were not displayed in a cabinet in the Closets Builder.(1872531)
2. Corrected situation that when duplicating a cabinet from Closets Builder, the Increment value was not maintained, thus allowing undue editing of module dimensions. (1859884)
Opening
1. Fixed a situation where Promob would not open if the computer had no internet access.
3D Space
1. Fixed the situation where unconformity was displayed when sending computer information in the Help - Support - Send computer information menu.
2. Fixed situation where the floor spacing changed to -5 after adjusting the floor limits. (1866467)
3. Fixed situation where the Import menu disappeared when closing a project and returning to the Connect screen (1875924)
4. Fixed situation where changing the serial number on Promob made it impossible to see the prices online.
- Enhancements
Project
1. A message is now displayed when closing Promob while connect is saving a project. This avoids losing the project.
Budget
1. A message is now displayed during the generation of a budget, telling you which step is being processed for the process follow-up.
2. Created shortcut to 2020 Manager negotiation in the budget preview screen when the project has an active negotiation. For more information click here.
Transfer Assistant
1. Removed obsolete options from the Transfer Wizard when used together with Connect 2.0 or using the Maker distribution.
Export and Import
1. Removed obsolete options from the File - Export and Import menu:
-
All Distributions: Export/Import Margins and Export/Import Prices.
- Distribution Maker: Export/Import Dimension Setup
3D Space
1. Now the name of the 3D Environment is the name of the registered project, for users with Connect 2.0.
▼ 5.60.16.83
- Corrections
▼ 5.60.16.82
- Corrections
▼ 5.60.16.81
- Corrections
Budget
1. Fixed situation where the design file was not loaded in the Send To - FTP screen. (1865619)
2. Fixed situation where there was an unconformity when accessing the budget with Connect nas versões 1.0. (1865044)
3. Reverted the correction released in version 5.60.16.77: Fixed the situation in which the message Budget contains items with no price even when all items had the price registered. The correction was causing inappropriate behavior. (1864621)
3D Space
1. Fixed situation where Promob closed unexpectedly. (1866465/1865047)
Note: For this, it was necessary to reverse the correction released in version 5.60.16.77: Fixed the situation in which some positions only perforated one side of the modules/with only positions. (1768437/1811290)
Customer Data
1. Fixed situation in which the information in the customer data fields were not saved in Connect when edited through Promob. It is now only possible to edit these fields in Connect. (1865707)
Customer Data on Connect:
Customer Data on Promob:
Design
1. Corrected situation where it was allowed to close Promob while a design was being saved. Now a message is displayed, preventing the loss of the design.
▼ 5.60.16.79
- Corrections
Custom Fields
1. Fixed the incompatibility situation with Custom Fields in Promob with Connect version lower than 2.0.
Library
1. Fixed a situation where pressing the shortcut Ctrl + Shift + F5 improperly released all library modules in Promob Maker Design. (1847307)
▼ 5.60.16.78
- Enhancements
- Corrections
▼ 5.60.16.77
Date: 30/03/2022
- Enhancements
Printing - Automatic Documentation
1. It is now possible to maximize the Auto Documentation window. For more information click here.
2. The default value of the Range Dimensioning, is the value respective to the module with the greatest depth located parallel to the selected wall. When you open the Dynamic View in the Viewport in the Automatic Documentation, it will be in the position defined here in the Range Dimensioning. For more information click here.
3. Now, the default value of Cut Height is equal to the value of the greatest height between the wall(s) contained in the 3D environment. The maximum acceptable value in the field is the default value. For more information click here.
4. Added the icon that directs to the Promob support page regarding printing.
1. The automatic dimensioning calculations are now more precise; when you hover the mouse near the center of the dimension, an orange square appears at the midpoint of the edge, so that you can add a new dimension with precision. For more information, click here. aqui.
2. Adjusted the font size on the print page.
Floor
1. Added a Cut Floor when Finished option in Preferences-Environment-Build Walls that when checked, causes the floor to be adjusted automatically in the wall editor. For more information click here.
2. Provided the option Create Default Floor, For situations where Automatic Floor Adjustment is enabled, or it is necessary to make or redo changes to the floor dimensions, you can use the Create Standard Floor tool. It disregards the created last floor and creates a floor with default dimensions, equal to those displayed in the new design (5000 x 5000 mm). For more information click here.
Walls
1. When you build walls in the Wall Editor, angular and linear dimensions are automatically displayed. For more information, click here.
- Corrections
Views
1. Fixed the situation where the name of Views were incorrectly displayed in both English and Chinese languages.
Dynamic View
1. Fixed the situation where dimensions were displayed on top of the wall on the print page.
Autosave
1. Fixed the situation where the automatic save file was generated with the incorrect project name.
Budget
1. Fixed the situation where the message Budget contains unpriced items was displayed even when all items were priced.
2. Fixed the situation where you could only assign a margin value in module properties after generating a listing or budget.(1841687)
3. Fixed the situation where if the system had some special character in the name it would not load the Customer Data in the Budget. (1845040)
Design
1. Corrected the situation where some hardware only pierced one side of the modules/components.(1768437 and 1811290)
Translation
1. Corrected the English language translation of the Unauthorized Account message.(1798994)
2. Fixed the situation where the translation for the word Quota was missing in the Quota and Leaders Setup window.(1827591)
Print
1. Fixed the situation where it was not possible to change the Margin values in the Page Setup of the Print Prototype.(1827641)
2. Corrected the situation where the Listing was not updated after being modified on the print screen. (1830742)
Crosspiece Editor
1. Fixed the situation in which the KEEPMODELDESCRIPTION attribute did not work correctly in the Crosspiece Editor, so the door traverse model was separated from the profiles and glass model. (1750285)
Modulation
1. Fixed the situation in which the module was improperly duplicated if it tried to apply an external material not supported by Promob.
Custom Fields
1. Fixed the situation where when the fields were filled in by the user, the data was not saved in the database. Now the recording of fields in text and combobox format is with default values.
2. Corrected the situation where the standard fields were displayed only at the bottom of the screen, after the custom fields. Now the standard fields are displayed first, and then the custom fields.
Transfer Assistant
1. Removed the Export project option from the Transfer Assistant in Promob with Connect 2.0. (1844580)
Nomenclatures
1. Standardized the nomenclature of Text Editors to the international standard. (1827595)
▼ 5.60.16.76
Date: 03/21/2022
- Corrections
Custom Fields
1. Fixed the situation where custom fields were not updating values. (1850927 and 1851866)
▼ 5.60.16.75
Date 03/14/2022
- Corrections
Custom Fields
1. Fixed the situation where custom fields of type "rep_" were displayed repeatedly in the Help - About screen and in the additional information of the Project Details tab.
▼ 5.60.16.74
Date: 03/07/2022
- Corrections
Promob Worker
1. Fixed situation in which when using Promob Worker, a message was displayed informing that it was necessary to update Promob and it was closed improperly. (1848734)
Send To FTP
1. Fixed the situation where in Budget - Request - Send To FTP the project was not automatically added to the Files to Send field when there was Connect. (1848850)
▼ 5.60.16.73
Date: 02/24/2022
- Corrections
Materials
1. Fixed the situation where the materials tab was not displayed in the properties of Catalog3D items. (1844521)
Catalog 3D
1. Fixed the situation where some Catalog3D items did not show the description in the 3D Space.
▼ 5.60.16.72
Date: 02/22/2022
- Corrections
Budget
1. Changed the nomenclature that is generated from the .promob file when it is uploaded through the Send To FTP menu, now the nomenclature is only the project name, and no longer the project name and the Connect option name.
▼ 5.60.16.71
Date: 02/22/2022
Catalog 3D
1. Fixed the situation where it was not possible to apply materials to Catalog3D items. When trying to apply a material, a message was displayed and prevented the application.
Budget
1. Corrected the incorrect translation in the Save As window, displayed when clicking Send To, in the Budget tab.
▼ 5.60.16.69
Date 02/07/2022
- Enhancements
Unconformity
1. Added field OpenedOptionID in the unconformity report generated by Promob.
3D Space
2. Improvement made in which when clicking on an online module in the 3D space, its code is displayed in the lower bar of Promob.
Validations
1. Improvement made in which the Promob subscription is validated daily. When the subscription is no longer valid, a message will be displayed and Promob will be closed automatically without saving the changes made to the design.
Import Design
1. Added option to import design in Promob Maker.
5. Added option that allows to import designs from 2020Design. Imported items are highlighted in red to identify the import, with the exception of door and window items that are imported directly from the Decore library. For more information click here.
- Corrections
Project Saving
1. Fixed the connect Autosave for newly created designs.
Mirroring
1. Removed vertical mirroring option that didn't work properly.
Budget
1. Fixed the situation where prices were not automatically updated on the price publication screen when pressing the Enter key.
2. Adjusted so that when saving the margins, the Maker configuration value is also saved.
Materials
1. Made an adjustment in which it is no longer possible to change materials and textures in online library modules, except for Decore.
2. Fixed the situation where when applying a material With the same model, the material was not applied correctly depending on which part of the module was selected.
3D Space
1. Fixed the situation where the stripe size was unconfigured when being selected by the stripe editor.
Access Link
1. Fixed the link referring to the How does it work? button.
Modulation
1. Made an adjustment where it is no longer possible to change the Mcode of online partner modules.
2. Adjusted message for modules with unavailable default values. The message changes from Project with changed modules to Project with modules with unavailable default values. (1721272)
3. Fixed the situation where, in some cases, when saving a design, opening it again and moving a module or component, yellow lines were generated as if they were new components in the 3D space. (1787108)
4. Fixed the situation where when adding a Decore module saved in Favorites in the 3D space, an unconformity was displayed and the module was added incorrectly. (1809921)
Models
1. Fixed situation where it was not possible to apply models to hidden tab items. (1817742)
Custom Fields
1. Fixed the sending of the names and default values of custom fields to the budget XML.
Import design
1. Fixed the situation where when trying to import a design (via Connect) an unconformity was displayed regarding the directory of the imported file.
Designs
1. Fixed the situation where hardware was not inserted in some items of old designs. (1831155)
▼ 5.60.16.68
Date 12/03/2021
- Corrections
▼ 5.60.16.67
Date 11/22/2021
- Corrections
▼ 5.60.16.65
Date 11/16/2021
- Corrections
▼ 5.60.16.64
Date 11/11/2021
- Corrections
▼ 5.60.16.62
Date 11/05/2021
- Corrections
1. Fixed the situation where the Autosave folder was not found when saving and closing a design in Promob Maker.
1. Fixed situation where circular geometry was locked when changing the drawing plan.
1. Fixed situation where component price was incorrectly calculated after setting a value.
1. Fixed the situation where the binoculars button did not search in the Dimension Configurator.
1. Fixed the situation where when pressing the Help button in the Tops Editor the page was not displayed. (1786358)
1. Fixed the situation where the Date Type custom field on the Help - About tab was displayed as a text type field.
1. Fixed the situation where materials could not be applied to Decore items with the same model.
- Enhancements
1. Nomenclature change from license to subscription.
1. On the Promob Student registration screen, the values are no longer updated.
2. It is possible to dimension the straight and angled walls in the Wall Editor and thus identify the size of the created wall. Click here for more information.
▼ 5.60.16.59
Date 10/19/2021
- Corrections
1. Fixed the situation where the thickness of lines in Print and Geometry Editor became extremely thick after Windows update (KB5006670). (1806223)
▼ 5.60.16.57
Date 10/13/2021
- Corrections
1. Fixed the situation where whenever saving projects with external images, the message Error while saving was wrongly displayed.
▼ 5.60.16.56
Date 10/05/2021
Compatible with Connect version 2.0.83 or higher
- Corrections
1. Fixed the situation where the template preview in the Tools - Templates tab, displayed the image of the wildcard material instead of the material drawing. (1794166)
2. Fixed a situation where the Features Configurator did not apply changes if Promob was in the English or Spanish language. (1799959)
▼ 5.60.16.55
Date 10/04/2021
- Enhancements
1. Added the Buy Online feature, where you can purchase items from partners through Promob. For more information, click here. IMPORTANT: This feature is available for Promob Plus, Academic, and Student.
▼ 5.60.16.53
Date 09/29/2021
- Corrections
1. Fixed situation where company data was not saved again (after changed) after the first project save.
2. Fixed the situation where some of the custom fields were not inserted in the project XML.
▼ 5.60.16.51
Date 09/22/2021
- Corrections
1. Fixed situation where company data was not saved again (after changed) after the first project save.
2. Fixed the situation where some of the custom fields were not inserted in the project XML.
▼ 5.60.16.50
Date 09/14/2021
- Corrections
1. Fixed the situation where certain custom attributes did not follow the correct value when generating the budget XML.
- Enhancements
1. Added AutoSave compatibility with Connect. The project is saved every 5 minutes, and the file remains in Local for 30 days after its creation date. Note that this is only a backup file, the original file remains saved in the cloud.
2. Inserted a validation that checks if the serial number is in the org chart. If so, the local cache is deleted and when logging in again (and if the login information is correct), access is released.
3. Changed the warning message about the expiration of the subscription, and included a note to disregard the message in cases of automatic renewal.
▼ 5.60.16.48
Date 09/08/2021
- Corrections
1. Fixed the situation where the Prepare for sending feature from the File menu that is unique to the Maker system, was improperly displayed on all systems. (1786438)
2. Corrected the loading of Builder processes into the budget, in which they were not loaded when promob was opened and therefore not executed in the budget.
3. Fixed situation where Client Data was not being fetched from the Worker distribution. (1787400)
4. Corrected the situation where unconformity were displayed when selecting FTP in the Send To Budget.
5. Fixed the situation where when exporting XML via Send To in the Budget, unconformity were displayed. (1738646)
6. Fixed the low performance situation when changing module sizes.(1770615)
7. Fixed situation where some Decore library doors were incorrectly reloaded in a project with the door inverted. (1638429)
8. Fixed the situation where the circular geometry did not accept the center setting for insertion when left-clicking, and therefore, had a different behavior than the other geometries.
9. Fixed the situation where the component price was not automatically updated when its initial value was zero, it was necessary to manually change it by clicking on the zero value in the budget generation preview screen.
10. Fixed a situation where the Features Configurator did not apply settings when the Promob language was in Spanish. (1786440)
11. Fixed the situation where the print page did not display the information on the Customer Data tab. (1784550)
12. Fixed the situation in which when reopening projects that contained tops with true EDEBANDCONDITION attribute, and Wildcard model applied to the edge tape, the information of the material applied to the edge tape was lost.
- Enhancements
1. The custom fields that are added in Connect will be displayed according to their configuration, and can appear on the Project Details screen (in Connect) or in the Help - About menu. These fields will also appear in the XML generated in the Quote with the value entered (if any). For more information, click here.
2. Made changes to icons/screens in Promob Maker: desktop icon, the Promob opening/loading screen, the header on the Help - About screen, and the title (2020 Maker) when it is the Maker NA distribution.
▼ 5.60.16.35
Date 08/16/2021
- Corrections
1. Reversed the fix released in version 5.60.16.34 that caused the incorrect calculation of Repetitions and Quantity of items in the Budget.
2. Fixed the unconformity that was displayed when using some Send To options in the budget.
3. Fixed the situation where incorrect information from previous projects was loaded into the budget and printing.
4. Fixed the situation where Builder steps were not loaded into the budget.
IMPORTANT: On 10/20/2021 version 5.60.16.35 was updated with the following correction: 5. Fixed the situation where the thickness of lines in Print and Geometry Editor became extremely thick after Windows update (KB5006670). (1806223)
▼ 5.60.16.34
Date 07/19/2021
- Corrections
1. Fixed situation where material direction orientation grouped different items in budget XML. (1739874)
2. Changed the visibility of the prepare for send button, which was displayed on all systems and should only be used in the Promob Maker system.
3. Fixed the situation where when using units of measure such as inches, when entering the number in multiple entries in the Closets Builder modules, the quotes were entered together in the number field, and the process did not complete correctly. (1761602)
4. Fixed the collision rule, which validates the priority of module components, in the Crossbar Editor. (1745631)
5. Fixed situation where some Features Configurator items did not update when changed. (1768725)
6. Fixed a situation where, in Promob Maker, too many items were displayed in the hidden list in the module bar. (1768077) IMPORTANT: This fix is compatible with version 1.2.0.65 or higher of the Library Configurator Plugin.
7. Fixed the situation where the Price List button was improperly displayed in Promob Maker. (1766619)
8. Corrected the word Qunatity to Quantity in the budget sorting. (1766634)
9. Corrected translation in the Tools - Preferences tab, in the option to use the new Properties tab. (1765803)
10. Fixed the translation in the Light Editor, of the fields on the Position tab of the Direction window. (1761622)
11. Corrected the translation of the Repositioning screen. (1773806)
12. Corrected the situation that caused Promob to close when generating a budget without having the project saved in Connect.
▼ 5.60.16.30
- Corrections
1. Fixed the situation where Promob could not read the information from the Company Data that is available in the Help-About menu.
▼ 5.60.16.28
- Corrections
1. Fixed the low performance situation that occurred when changing the dimension of an item in the Properties Panel.
▼ 5.60.16.25
- Corrections
1. Compatibility with Promob Builder version 1.60.16.5 is now available.
▼ 5.60.16.24
- Corrections
1. Corrected the situation where the message Saving project did not finish correctly after saving. It kept blinking.
2. Corrected the situation where Unconformity was displayed when applying materials when copied from a Catalog3D item and pasted into another Promob library item. (1765848)
▼ 5.60.16.22
- Corrections
1. Fixed the situation where Notes were not displayed in the budget.
2. Corrected the situation where in a project that had a module with a non-existent model, when updating the module (Ctrl + Shift + L), the module model was still displayed in blue and with transparency, that is, non-existent. So the fix was made to update to the first available, visible, and enabled template. (1755421)
3. For compatibility reasons, the fix available in version 5.60.16.20 where the Builder Steps in the Budget were not loaded was removed. IMPORTANT: This fix will be available again soon.
▼ 5.60.16.20
- Corrections
1. Fixed the situation where Notes were not displayed in the budget.
2. Corrected the situation where in a project that had a module with a non-existent model, when updating the module (Ctrl + Shift + L), the module model was still displayed in blue and with transparency, that is, non-existent. So the fix was made to update to the first available, visible, and enabled template. (1755421)
3. Fixed the situation where Builder Steps were not loaded into the Budget.
▼ 5.60.16.19
- Corrections
1. Corrected the situation in which some entities were inserted with the incorrect dimensioning, and they were also loaded with a yellow outline informing that the dimensioning was changed. (1760851)
IMPORTANT: To solve projects already created, it is necessary to reinsert the item in the project.
2. Corrected the situation where a project that had a module with a non-existent template, when updating it (Ctrl + Shift + L), the module's template was still displayed in blue and with transparency. So the fix was made to update to the first available, visible and enabled template. (1755421)
- Enhancements
1. The Send To Budget functionality now allows you to save the project and send it via Connect version 2.0. For more information click here.
▼ 5.60.16.17
- Enhancements
1. Improved performance when opening projects in Plus Professional.
2. Serialized the attributes in the budget.
- Corrections
1. Fixed situation where handles were displayed in the incorrect grouping. (16567948)
2. Corrected the situation where the side of the module is no longer displayed after automatic insertion.
3. Corrected the situation where the materials were not applied correctly in the module that had the Curinga model, the color gray was always applied. (1738835)
4. Corrected situation where unconformity was displayed when inserting material. (1753164)
5. Corrected the situation where the window for choosing import files from the File - Import - Export - Margins menu was not displayed.(1754091)
6. Removed the update made available in version 5.60.16.10 in which Maker automatically shared information in its folder.
IMPORTANT: The update will soon be available again.
7. Fixed the situation where the Invoker was not saved correctly using the Worker system.
8. Fixed situation where the Curinga template lost the applied material when it had the EDGEBANDCONDITION attribute (1738835).
9. Fixed situation where a module item was removed by position competition when reprocessing hardware, even if it did not have the competition attribute applied. (1731542).
▼ 5.60.16.14
- Corrections
1. Corrected the situation where the preview image of the Models did not load.
▼ 5.60.16.13
- Melhorias
Orçamento
1. Inserida descrição com o nome do módulo nos itens orçados da Decore.
Teste Teste
- Corrections
1. Corrected the situation where when applying a texture model with veins, the texture was displayed without veins, even when filling with lines was active. The situation occurred when applying textures through the Tools - Models tab and the Materials tab.
▼ 5.60.16.11
- Corrections
▼ 5.60.16.10
- Supported plugins
Plugin Revest - 1.7.12
Plugin Real Scene 2.0 - 1.2.13
Plugin Real Scene - 4.0.5
Plugin New Auditor - 1.1.25
- Corrections
1. Changed the name of the option from New Client to New Project;
2. Corrected the situation in which the measurement unit of the rotation control changed according to the measurement unit configured in the Preferences tool. For this, the rotation measurement unit was adjusted to always be considered in Degrees. (1733650)
3. Corrected the situation in which an inconsistency was displayed when generating budget structures, when the XML Description Translation option was active. (1733898)
4. Corrected translations in the 3D Import Items window. (1703937)
5. Fixed the situation where Composite Margins were not displayed in the Margins window.
6. Corrected the situation where the unconformitydid not display the system information correctly. (1710324)
7. Fixed the situation where some formulas were not resolved correctly when inserting the module into the 3D environment. The situation was causing the modules to display incorrectly in the 3D environment. (1711368).
8. Fixed situation where unconformity was displayed on the print page when there were Catalog3D items. (1708987)
9. Corrected the situation where it was possible to generate budget in mirrored environments. It is not possible to generate the budget in mirrored environments, click here for more information. (1674742)
10. Fixed the situation where the materials applied to Catalog3D panels were not saved. (1656514)
11. Corrected the situation in which the raw materials that had translation, did not translate after inserting in the 3D environment. (1640557)
12. Corrected the situation where the buttons for drawing top and bottom faces of geometries were displayed incorrectly in the Tools- Properties window (1709112)
13. Corrected the situation where when opening projects that had modules with dimensions pre-determined by the system, they loaded with altered dimensions. Now, when opening the projects, it will indicate when the module dimensions have been changed in the system. For more information click here. (1722970)
14. Fixed a situation where Maker was not searching for previous settings information. The situation occurred because the settings folders were displayed with different names. (1722651)
15. Fixed the situation where the Help menu within Promob directed to the old Support page. Now when clicking on the option, it is directed to the new support page. (1706531)
16. Corrected the translation on the License Verification screen. (1706528)
- Enhancements
1. Provided a notification message regarding the expiration of Promob subscriptions. It will communicate when the subscription needs to be renewed, 7 days in advance, as well as notify you when the subscription has expired. For more information, click here.
2. Provided improvement on the print page, for hotpoints. The Search Size field was added, where the value informed defines the area that will display the hotpoints around the mouse pointer, in pixels. Increasing this value, consequently more hotpoints will be displayed.
▼ 5.60.15.65
- Corrections
1. Corrected the situation where some values were rounded improperly in the budget. (1722272)
▼ 5.60.15.63
- Corrections
1. Fixed the situation where it was not possible to save the project if the project had more than 10 images attached in the print or listing. The situation occurred in Promob with Connect in version 2.0.
▼ 5.60.15.62
- Corrections
1. Corrected the situation where the compound margins were not displayed correctly. (1721807)
▼ 5.60.15.61
- Corrections
1. Fixed the situation where some items from the Closets Builder were left with the empty ITEM_BASE and COMPLETE attributes.
▼ 5.60.15.60
- Corrections
1. Corrected the situation in which Promob did not identify the Chinese language as an automatic option, when the operating system was in English. (1680190)
2. Corrected the situation where it was not possible to change the cabinet builder module reference, through the Properties menu. (1708534)
3. Corrected the situation where the images inserted in the printing screen were displayed in gray in the reopening of the project. (1680904)
4. Fixed the situation where it was not possible to reinsert images that were attached to the project after the project was reopened. (1687363)
5. Corrected the situation where the option "Send to" used in the budget, did not execute the correct directory when there was the register for some executable file.
6. Corrected the situation in which when changing the language of Promob the file of Réguas da Parede (Parede.ruler) also changed the language, and thus when changing the Promob to Portuguese again, the file of Réguas da Parede did not change and lost translations.
7. Fixed the unconformity that was displayed in Favorites when opening Promob. (1648050)
8. Corrected the situation where the loading of the libraries in Maker Design did not maintain the initial selected configuration.
- Enhancements
1. Added a new system filter, where it is possible to enable saving the print image in the project. (1689877)
2. Order margins have been blocked and are read-only, Budget margins are still editable in Promob Maker Design. In Promob Maker Produce and Maker Automate, all margins remain editable.
3. Promob Maker (Design, Automate and Produce) passes its respective initial selected configuration to prices.
4. Promob Maker (Design, Produce and Automate) no longer calls the prices API to create context.
▼ 5.60.15.59
- Corrections
1. Revised the Promob execution processes.
▼ 5.60.15.58
- Corrections
1. Corrected the situation where, after resizing the module, the doors opened in the opposite direction. (1707381)
▼ 5.60.15.57
- Corrections
1. Corrected the situation in which a unconformity was displayed when a geometry was created and an angle was added on some edge of that geometry by the Geometry Editor. (1706999 e 1705229)
▼ 5.60.15.56
- Corrections
1. Corrected the situation where it was not possible to change the width of the module through the Build Closet tool. (1704542)
▼ 5.60.15.54
- Enhancements
1. Changed the path in which it was saved in the local dynamic structure.
2. The types of quotes that contain operation in the Produce version are hidden.
3. Implemented the improvement in which the models that are loading will be temporarily removed while starting Promob.
4. Inserted the generation of midpoints in modules and geometries, making it possible to select them for insertion of the module in the environment or in the printing dimension. For more information, click here.
5. Inserted the option to import 3D files with extension .axs and .dwg.
6. Added the option of the Tiff format for images generated by the slides according to the improvement made available via Promob. For more information, click here.
- Corrections
1. The online items loading progress bar has been removed, as loading progress was incorrect.
2. Corrected the situation where doors and windows were visually open in the 3D environment, but was shown as 0 in the Opening menu.
3. Corrected the situation in which the Closets Builder items did not correctly change the model in the description after being inserted into the environment.
4. Fixed the unconformity that was displayed when loading favorite items at the opening of Promob.
5. Corrected the situation where the store code on the Customer screen was replicated incorrectly.
6. Corrected the situation in which the methods $ PROPOSEDWIDTH $, $ PROPOSEDHEIGHT $ and $ PROPOSEDDEPTH $ - validated all dimensions of the module regardless of which one was used, now they resolve and validate only their respective properties.
7. Fixed the non-conformity that was displayed when accessing the Aggregates tab after creating an aggregate placement as a favorite. (1677571)
8. Corrected the situation where the Closets Builder stopped responding unexpectedly when changing the measurements of the placement of internal items. (1699979)
9. Corrected the situation where when changing the abbreviation / description of an item, translations were excluded from the Catalog.
10. Corrected the situation where the computer information was not displayed correctly in the Help - Support menu.
11. Corrected the situation where when selecting all items in the environment, the rectangular geometries were not selected.
12. Corrected the situation in which in the modulation with drilling operation, the drilling was displayed hollow and did not generate the faces correctly.
▼ 5.60.15.52
- Corrections
1. Corrected the situation where the drilling operations registered in the aggregates were incorrectly displayed in the modulations of the 3D environment.
▼ 5.60.15.50
- Corrections
1. Corrected the situation in which the new Promob installations, the Decore items were displayed only with the red item outline box and were not inserted in the environment.
▼ 5.60.15.49
- Corrections
1. Fixed the unconformity that was displayed when accessing the plugin window.
▼ 5.60.15.46
- Enhancements
1. Available in the configuration in the register of automatic functions the option to hide the automatic functions also in Promob. For more information click here.
2. Added the translation of the description of the budget items in the XML generated by the budget. For information on how to configure the translations click here.
3. Provided improvement in the performance of the Catalog3D, and the search of items in the Catalog3D.
4. Inserted the query for accounts authorized to open systems via Promob Catalog.
5. Inserted the creation of wet area, insertion of modules with drilling (vats) in holes. For more information, click here. (1516258)
6. In the Cabinet Builder, when adding items, such as fronts, dividers, etc., that modify the structure of the cabinet, when pressing OK or Apply, the structure will be reprocessed.
7. Added language translation in unconformities.
- Corrections
1. Fixed situation where error was displayed in the authorization and login files had to be removed. (1554597)
2. Corrected situation in which the Builder's Production Materials registered for the Cut had their references changed and did not budget correctly. (1649767)
3. Corrected the situation where the Dimension Configurator settings were unduly changed when opening and closing your screen. (1664974)
4. Fixed the situation where the margin screen was displayed in the background, and it was necessary to close Promob to display it. (1638488, 1648744, 1654852)
5. Fixed the situation where the budget made by area did not display the ID of some items. (1649273)
6. Corrected the situation where the image generated by the slide was not displayed in the image via budget. For more information, click here. (1657027)
7. Corrected situation in which when inserting two modules with Cava handle leaning against the Square Column of the Decorate library, when reopening this project, the cava handle disappeared from the second inserted module.
8. Corrected the situation in which some items of Decore had an increase in quantity every time the project was opened and saved.
- Plugin Compatibility
Plugin Real Scene - 4.0.3
Plugin Real Scene Studio - 4.0.0.2
Plugin Real Scene 2.0 - 1.1.20
Plugin Information - 5.2.0.11
Plugins Builder - 1.60.15.1 or higher
▼ 5.60.15.43
- Corrections
1. Corrected the situation that the geometries created in Promob Plus Professional were not displayed in other Promobs. (1654539)
2. Fixed situation where when restoring the Standard price list, the incorrect name of the price list was displayed (1663653)
▼ 5.60.15.42
- Corrections:
1. Fixed the situation where it was not possible to edit the price of some panels in Promob Plus Professional and Promob Plus Enterprise. (1662374)
▼ 5.60.15.40
- Enhancements:
1. Support is available in the user interface to define which face should be drawn in the Promob Catalog.
2. Also added in the Budget the userunit assembler, to convert the dimensions in the budget.
3. Inserted the 2020 identity in the products.
4. Added to the user an option to have more than one price list in Promob Plus Enterprise. For more information, click here.
5. Available the option of Assembler DrawersQuantity, responsible for checking and returning the number of drawers of the same type within the gap in which they are. For more information, click here.
6. Available the option of Assembler DrawerIndex, responsible for checking and returning the index of the drawer within its compartment. For more information, click here.
7. Improvement in performance in processing the formulas.
- Corrections:
1. With the operation of the geometry budget changed in Promob Plus Professional, it is no longer possible to edit the values through the Budget Editor, the editing can only be done in the 3D environment in the Properties - Price menu.
2. Corrected the incorrect currency situation in the Promob Plus budget.
3. Corrected the situation where the Plugins configuration screen did not open in Promob Worker.
4. Corrected the situation in which the Decore spots were positioned after drilling.
5. Corrected the situation where after the registration of material in the Builder, there was a change in the Model unduly. (1649766)
6. Corrected the situation where the batch print displayed the blank PDF's.
7. Corrected the unconformity that was displayed when checking the license.
8. Fixed situation where Promob would not open in Chinese without the system selection window.
9. Fixed unconformity that was displayed when saving when more than one Promob was executed in 32 bits.
10. Corrected the situation in which after creating arrangements or duplicating items, the items of Decorate online were no longer displayed in the 3D environment. (1646502)
▼ 5.60.15.34
- Corrections:
1. Corrected the situation where the recessed spotlights were not positioned correctly when drilling. (1646372)
2. Fixed situation where Decore's item arrangement did not draw all modules of the arrangement correctly. (1646502)
▼ 5.60.15.31
- Corrections:
1. Corrected the situation where faces originated from holes in geometries were displayed incorrectly. (1636184,1637852,1638767,1639835)
2. Removal of the improvement regarding the drilling of vats in a wet area, implemented in version 5.60.15.22. The improvement will soon be available again.
3. Corrected situation where changes in margin group settings were not saved. (1604334)
▼5.60.15.26
- Enhancements:
1. Improvement provided in which the documents (impressions, renderings, budget) attached to the project, will be loaded only when requested when clicking on these items.
2. Reduced the number of requests for Catalog3D and Manager made at the opening of Promob, resulting in an improvement in the opening time.
3. Optimized the time to insert modules and save projects, in projects that have very complex references. (1631309, 1631369).
4. In the Preferences, the Opening Mode option was added, in which it is possible to define how Promob will open projects that have online modules. For more information, click here.
5. Added in the Plugins, the information about their expiration date.
6. The option of importing and exporting DXF attached to the geometry is made available by the Geometry Editor. For more information, click here.
- Corrections:
1. Corrected the situation where when some inconsistency occurred, during the opening of Promob, a message was displayed behind the opening screen.
2. Corrected the situation where textures were not saved in the project of some Catalog3D items.
3. Corrected the situation where the Margins were not loaded when opening the screen of extra items.
4. Corrected the situation in which Promob stopped responding unexpectedly in the material selection screen, occurred in both Catalog and Revest.
5. Corrected the situation in which when sending projects in Project Viewer, the message of invalid identifier was displayed.
6. Corrected the situation where the structures that had no price, and the alert property item without active price, were displayed in the budget generation.
7. Corrected the property standard value of materials Refractive Index from 0.3 to 1.
8. Corrected the unconformity that was displayed when opening some projects with Catalog3D items with drilling.
9. Corrected situation of inconsistency with Framework 4.6.1.
10. Corrected the insertion orientation of the item Wait for Sewer in the Decore library, you will now follow the orientation of the plan in which you are inserted.
▼ 5.60.15.24
- Corrections:
1. Made adjustment on importing projects from ManagerOne.
▼ 5.60.15.22
- Enhancements:
1. Improvement made available where, by default, the options for confirming the application of margins, are displayed unchecked. For the change to be considered, the user needs to confirm whether the margin will be applied to all Promob licenses or only to the license where the margin was changed. (1589295)
2. Improvement provided in which it is possible to drill sinks overlay in a wet area, that is, drilling over another drilling. The improvement allows you to correctly position the item that will pierce the drilling without overlapping the design. (1516258)
3. Performance improvement made available in the insertion of Catalog3D item when using the Array tool.
- Corrections:
1. Corrected the unconformity that was displayed when using Leader Reference on the printing page, when there were in the 3D environment, build closet's modules with associated Catalog3D items. (1621933)
2. Corrected the situation where, in the Editor Geometry when drawing geometry with low relief on the surface with the RIG4X15 tool, available only for a specific system, the geometry was inserted, but did not perform the cut low relief on the surface. (1614149 e 1615175)
▼ 5.60.15.19
- Corrections:
1. Corrected the situation where, when moving items on the movement panel and integrating with the Plugin Builder, the accuracy of the information was lost and made it difficult to calculate the collision between them. The situation occurred only in licenses that had the Plugin Builder linked.
2. Corrected the situation where when migrating from version 5.38 to version 5.60 of Promob, prices were displayed differently from the registration made in version 5.38.
▼ 5.60.15.13
- Corrections:
1. Corrected the situation in which, when generating the XML file, the IDPRICEPROVIDER value was empty in some items and, consequently, prevented ERP integration with systems that use this value. (1622166)
▼ 5.60.15.12
- Corrections:
1. Corrected the situation where, when generating XML, item information was not displayed correctly. (1542976)
2. Corrected the situation where, when integrating with ERP through the Promob Worker plugin, the parts information was not displayed in the XML when there were Catalog3D items in the projects. (1616191)
3. Corrected the situation where, when batch printing to PDF, it was requested to save one pagination at a time, instead of generating the impression in a single file. The correction makes it possible to do batch printing with the PDF printer that is installed on the machine. (1620436)
▼ 5.60.15.10
- Enhancements:
1. Improvement made in that, the shipping time for FTP orders has been reset to 1 minute. A message will notify if the time limit is reached.
- Corrections:
1. Corrected the situation where, in some specific cases, sliding doors were in incorrect positions when inserted into the 3D environment. The situation occurred because the registration rules were not respected.
2. Corrected the situation where the price registered for geometries was not sent to XML.
3. Corrected the unconformity that was displayed when opening projects, when there were some specific items of decoration.
4. Corrected the unconformity that was displayed when inserting some items. The situation occurred, due to the conflict of registration of models of them.
▼ 5.60.15.8
- Corrections:
1. Corrected the situation where, while loading the items in the 3D environment, the position of the green box (bouding box), was different from the position of the inserted item.
2. Made adjustment in the register of the illustrative images of the items, in the library. (1588486)
3. Corrected the unconformity that was displayed when opening projects of version 5.38 in version 5.60. (1610653)
4. Corrected the situation where materials were not applied to imported items. (1568968)
5. Corrected the unconformity that was displayed when generating budget.
▼ 5.60.15.5
- Corrections:
1. Corrected the situation where when applying arrangement on the sliding doors, they were inserted with infinite dimensions. (1504943)
2. Corrected the situation in which, when generating batch printing, the listing text was deconfigured. (1482875)
3. Corrected the unconformity that was displayed when generating a budget. The situation was due to the Catalog3D items being considered as items in the Promob library.
4. Corrected the situation where when duplicating modules, the aggregates were processed incorrectly. (1599787)
5. Corrected the unconformity that was displayed when using the Tampon Editor. The situation demanded greater processing of the machine, where it caused memory overflow. (1599633)
6. Corrected the situation where, when printing, the viewport did not load the changes made on the printing sheet and in the 3D Environment. (1503786)
▼ 5.60.15.3
- Corrections:
1. Corrected the situation where the selected models were not applied on the selection tab within Models. (1604826 and 1556823)
2. Corrected the unconformity that was displayed when navigating between library subtabs. (1607298)
▼ 5.60.15.1
- Enhancements
1. Chinese language translation available.
- Corrections
1. Corrected the situation where migrating Promob to version 5.60 did not load local margins registered in version 5.38. The situation occurred in some specific versions of 5.60.
▼ 5.60.14.17
- Enhancements
1. Improved performance of computer memory consumption.
- Corrections
1. Corrected the situation where curved profile geometries were drawn incorrectly.
▼ 5.60.14.15
- Corrections:
1. Corrected the situation where projects were not opened when there were curved geometries pierced by online items.
▼ 5.60.14.14
- Corrections
1. Corrected the situation where Decore Online luminaires did not move when moving lights.
2. Corrected the unconformity that was displayed when generating budget when there were invalid characters.
3. Corrected the unconformity when using 2D environment tools such as Geometry Editor and Region Editor.
4. Corrected the situation where when opening projects, online items would not load. The situation was due to the absence of the Microsoft Net Framework component on the computer.
▼ 5.60.14.10
- Enhancements:
1. Improvement made in zoom performance on the 2D panel used by the Wall Editor.
2. Available improvement in the load time of DXF files when imported into the Wall Editor.
3. Improvement made in the Build Wall tool, it was changed the coloration and the thickness of the walls for better visualization.
4. Improvement made in the loading performance of the projects with online items.
5. Was available listing of items and structures without price.
6. Improvement made in budget performance.
7. Improvement made in login performance.
8. Was available for the systems Promob Plus and Promob Arch, the opening of projects created in other libraries. When opening the projects, the items will be red.
- Corrections:
1. Corrected the unconformity that was displayed when executing the commands
CTRL+SHIFT+L in Decore Online items. (147316165)
2. Corrected the message that was displayed when rendering when using the default render. (1559488)
3. Corrected the situation where aggregate arrangements of Decore Online library items were not considered.
4. Corrected the unconformity that was displayed when inserting items from the Decore Online library. (1545553)
5. Corrected the unconformity that was displayed when inserting Decore Online library items when they had aggregates (1596850)
6. Corrected the unconformity that was displayed when generating a budget. (1592786)
7. Corrected the situation when inserting Decore Online items, the bounding box (green box of the item) was in the wrong position.
8. Corrected the situation where changes made to plate thicknesses were not considered in Build Closet. (1573815)
9. Corrected the situation where Sliding Doors were inserted incorrectly when using the Space Air system. (1573259)
10. Corrected the unconformity that was displayed when generating a budget on a given project. (1562320)
11. Corrected the unconformity that was displayed when changing and creating soundboards. (1597086)
12. Corrected the unconformity that was displayed when inserting panels with tops. (1597301)
13. Corrected the situation where it was not possible to open projects when there were hole geometries. (1575137)
14. Corrected the situation where the CTRL+SHIFT+L command didn't find the items in the Decore library. (1473165)
15. Corrected the message that was displayed when opening Promob. It occurred when a cache files corrupt or when accessing Promob with incorrect login. (1554597)
16. Corrected the situation where the Promob didn't open when it was performed by the Manager.
▼ 5.60.13.16
- Corrections
1. Corrected the unconformity that was displayed when generating Cinex Listing, with items that had the expression #. (1566610)
2. Corrected the unconformity that was displayed when manually inserting sliding doors that had the expression # from the cabinet library. (1569225 and 1575927)
3. Corrected the unconformity when displaying items in Decore Online 3D Environment in Promob Catalog version 5.60.1.7.