Cut Pro - Print types – Promob Support

Available in products

Editor

Cut Pro

In Promob Cut Pro, 9 types of printing are available. Find out what each one means for each configuration mode used.

Which Cut Pro configuration do you use?

Select the configuration used below and directly access the ideal content to help you.

Cut Pro Complete configuration.

Cut Pro Simplified configuration.

Review Cut Pro's Complete configuration and Simplified configuration here.

Complete mode prints

Click on a title below to expand the tab and discover how each print type is displayed in Complete mode

Cut Preview

When using this option, the Cut Preview of the Cut plan will be selected for printing. This impression will generate the reading of the cut plan.

To print a cut preview:

1. Click Print;

2. In Settings find the option Cut Preview;

3. Check here for more information on print settings.

Cut List

When using this option, the Cut List will be selected for printing. The Cut List displays the information for all items that will be cut on the selected plate.

The Cut List information is:

Item: identification of the item in the cut plan;

Description: Unique ID and name of the part;

Dimension: width, height, and depth of the item;

Edge: shows the sides of applying edge band to the part;

Parent Description: describes the characteristics of the module to which the part belongs, such as unique ID, name of the module and its dimensions;

Project (Customer): describes the client's environment and name;

Obs: displays additional information about the item (this information must be registered manually).

To print the cut list:

1. Click Print;

2. In Settings find the option Cut List;

3. Check here for more information on print settings.

Cut List Preview

When using this option, the Cut Preview of the plan plus the Cut List will be selected for printing. This print assists in the visualization and reading of the cut plan, since, for each printing page of the cut plan, a page with the cut list of the respective plate will be displayed in sequence

To print cut list preview:

1. Click Print;

2. In Settings find the option Cut List Preview;

3. Check here for more information on print settings.

Simplified Cut List

When using this option, the Simplified Cut List will be selected for printing. This printout displays information for all items that will be cut on the selected plate. The Simplified Cut List is a short version of the Cut List, whose main objective is to reduce the number of pages for printing, displaying only the most relevant information and grouping the same items, in the Quantity column.

To print Simplified Cut List:

1. Click Print;

2. In Settings find the option Simplified Cut List;

3. Check here for more information on print settings.

Production Plan

When using this option, the Production Plan will be selected for printing. The purpose of this report is to enable the printing of a table referring to all items in the project. The information in this report is taken from the list of items in the Main menu:

To print a production plan:

1. Click Print;

2. In Settings find the option Production Plan;

3. Check here for more information on print settings.

Purchasing List

By checking this option, the Purchasing List will be selected for printing. The purchasing list presents the list of items needed to manufacture the modules, such as plates, edges, and modulation accessories (handles, slides, hinges, among others).

Click here for more information on the Purchasing List

To print Purchasing List:

1. Click Print;

2. In Settings find the option Purchasing List;

3. Check here for more information on print settings.

Labels

By checking this option, the labels will be selected for printing.

To print labels:

1. Click Print;

2. In Settings find the option Labels;

3. Check here for more information on print settings.

4. Click here to check the types and models of labels;

5. Click here to learn how to configure labels;

6. Click here to learn how to configure the label image;

7. Click here to find out more information about barcode labels;

8. Click here to learn how to apply label display filters;

9. Access the Cut Pro main page and under the LABELS subheading, locate your label printer to learn how to configure it. See in this subtitle also, other information about labels.

Panels and Leftover Report

When using this option, the panels and leftovers report will be selected for printing. The purpose of this report is to provide a list of all panels and leftovers registered with Cut Pro.

To print panels and leftover report:

1. Click Print;

2. In Settings find the option Panels and Leftovers;

3. Check here for more information on print settings.

4. Check here for more information about the Panels and Leftovers report;

Edge Report

When using this option, the edge report will be selected for printing. The purpose of this report is to provide a list of all edges registered in Cut Pro.

To print edge report:

1. Click Print;

2. In Settings find the option Edge Tape;

3. Check here for more information on print settings.

4. Check here for more information on the Edge Tape report;

Simplified mode prints

Click on a title below to expand the tab and discover how each type of printing is displayed in Simplified mode:

Cut Preview

When using this option, the preview of the Simplified Cut Plane will be selected for printing. This printout contains the following information:

Print

2 cut plans are printed per sheet;
The page is in portrait mode;

Header

The information on the first line is printed: Customer, Total sheets (from all printed plans) and Total parts (from all printed plans);
The Project information is printed on the second line;
In the third line, the Observation, registered in the project information is printed. To review what this information is, click here;
The Date/Time and Unity are printed on the fourth line (unit of measurement defined in the Cut Pro settings).

Cut Plan

At the top of each cut plane, a new line is printed with the following information:

Material counter (M1, M2) - Material description - Quantity of parts in the cut plan - Yield X% - Quantity of stacked panels (x1)

The identification of parts in Simplified mode is made from a unique ID, the same present in the list of items in the Projects tab.

In situations where pieces of the same size are stacked, the information is printed together.

In Simplified mode, the Cut Preview has no subtitles. Unlike Complete mode, which displays a complete caption of all parts.

For edge identification on the pieces, in the Simplified mode, the code of the edge band is printed on each piece in only one side of each direction, next to the measurements.

That is, if the vertical sides of a part have an edge, the code will be displayed twice on the vertical side that displays the vertical measurement.

In the example below, the part with dimensions 452x654 mm has code R edge band on only one of the 452 mm sides and has code R edge band on only one of the 654 mm sides;

In this other piece, of 700x500 mm, it has an edge band of code R on both sides of 700 mm so it repeated the code twice. The piece has a code R edge band on only one of the 500 mm sides.

To print cut preview:

1. Click Print;

2. Under Settings locate the Cut Preview option;

3. Check here for more information on print settings.

Cut List

When using this option, the Cut List will be selected for printing. The Cut List displays the information for all items that will be cut on the selected plate.

The Cut List information is:

Seq: Sequential number increased with each new printed item;

Description: Material counter in which the item is located and a unique ID and description of the item.

Length: Length of the item informed in your registration;

Width: width of the item informed in your registration;

Qt: Item quantity;

Edge L1: Description of the edge located in C1 (length 1);

Edge L2: Description of the edge located in C2 (length 2);

Edge W1: Description of the edge located in L1 (width1);

Edge W2: Description of the edge located in L2 (Width 2);

Edge Location: Preview of edge band locations.

Obs: displays additional information about the item, informed in your registration.

To print the cut list:

1. Click Print;

2. In Settings find the option Cut List;

3. Check here for more information on print settings.

Cut List Preview

When using this option, the Cut Preview of the plan plus the Cut List will be selected for printing.

The Cut List will be printed at the end of the printing of all the cut plans, with the information of all the items in only one grid. The header is the same as the cut plan, with the same information.

To print cut list preview:

1. Click Print;

2. In Settings find the option Cut List Preview;

3. Check here for more information on print settings.

Simplified Cut List

To print Simplified Cut List:

1. Click Print;

2. In Settings find the option Simplified Cut List;

3. Check here for more information on print settings.

Production Plan

To print a production plan:

1. Click Print;

2. In Settings find the option Production Plan;

3. Check here for more information on print settings.

Purchasing List

Click here for more information on the Purchasing List

To print Purchasing List:

1. Click Print;

2. In Settings find the option Purchasing List;

3. Check here for more information on print settings.

Labels

By checking this option, the labels will be selected for printing.

To print labels:

1. Click Print;

2. In Settings find the option Labels;

3. Check here for more information on print settings.

4. Click here to check the types and models of labels;

5. Click here to learn how to configure labels;

6. Click here to learn how to configure the label image;

7. Click here to find out more information about barcode labels;

8. Click here to learn how to apply label display filters;

9. Access the Cut Pro main page and under the LABELS subheading, locate your label printer to learn how to configure it. See in this subtitle also, other information about labels.

Panels and Leftover Report

When using this option, the panels and leftovers report will be selected for printing. The purpose of this report is to provide a list of all panels and leftovers registered with Cut Pro.

To print panels and leftover report:

1. Click Print;

2. In Settings find the option Panels and Leftovers;

3. Check here for more information on print settings.

4. Check here for more information about the Panels and Leftovers report;

Edge Report

When using this option, the edge report will be selected for printing. The purpose of this report is to provide a list of all edges registered in Cut Pro.

To print edge report:

1. Click Print;

2. In Settings find the option Edge Tape;

3. Check here for more information on print settings.

4. Check here for more information on the Edge Tape report;

Articles in this section

Related articles