In some designs, the designer is asked to only have the outside of the boxes have a different color, while the inside of the piece of furniture is kept in a plain color, such as white, or even the color of the plate without lamination, the raw.
IMPORTANT: This option is only available for new designs, made after revision 16.01 of the Plus, Arch, Academic and Base systems. In previously made designs, to have this option, the modules will need to be reinserted in the 3D space.
To apply an external model other than the internal one:
1. Select the module or 3D space and go to Tools – Models. This option displays all models currently applied to items in the 3D space;
2. Click on the All tab to change the model of all modules in the space or Selection to change only the selected items;
3. In the selected tab there are two models with the same name, with the difference that one of them will always be preceded by the word External;
IMPORTANT: The standard model has priority over the external model. If after defining the external template, the default template is changed, it will also be applied to the external template and the external template change will need to be done again.
4. TIP: to display all models, click on the current model and select Show All option to view the available options in an auxiliary window. Select the template and click Apply to view it in the space. After setting the desired option click OK.
IMPORTANT: When selecting an External color different from the internal color of the furniture, these plates will be called Special Plates, due to their particularities. Due to this, the plate will be listed, in the Budget, in a differentiated category and may also have a different price.