News - Promob Follow

Welcome to the Promob News page!

Here we will briefly gather the main news and improvements made available in Promob products.

For detailed information, we suggest consulting the product-specific Release Notes.

09/28/2023 | System Revision Plus Professional, Plus Enterprise and Academic | 23.12

For more information on the System Review Release Notes, click here.

 

09/04/2023 | Promob Start and Maker BR | V.13 R.11

Dimensions Configurator

1. Added the possibility of inserting the bottom distance for a value less than zero in telescopic, standard and invisible drawers. The setting can be changed via the Feature Configurator in Assembly > Drawers > Structures > E - Undermount Drawer Bottom Distance.

2. Modified the representation of the image to make it clearer to understand the edge banding configurations on the external sides and closing view of the External Side Sliding Wardrobes with Doors closets from the Closets Builder.

 

Closets Builder

1. Available cutting partition for the Internal Side Office modules, allowing the construction of modules with widths exceeding 2700 mm. (2033992)

 

Partners

1. Updated the Fibraplac partner finishes as detailed below: (2037208)

• + Brancos: White Plus TX, White Plus LS, White Larissa e White Larissa LS.

• Concept: Grey Limestone Linen, Linen Fendi e Linum.

• Origin: Aspen, Oak Latin, Oak Tropical, Freijó Nature, Murano and Boreal Walnut.

• Sensações: Amber, Lavender, Ocean, Raphia, Sahara, Sakura, Urbi, Cabiúna Nobre and Serrano.

• Versátil: Grey Limestone, Mocca, Panna, Black, Preto Trama and Versato.

 

To check more information about the Promob Start release, click here.

To check more information about the Promob Maker BR release, click here.

 

 

09/28/2023 | Promob Cut Pro | 1.2.5.15

Leftovers

1. Improved the leftover saving screen. It is now possible to select the size of the leftovers to be saved in the cutting plan for each type of material. For more information about the leftovers, click here. (1320822)

 

Cutting/Label Manager

1. Now, it is possible to configure the information that will be sent to the labels of the Felder PC7000 cutting manager. For more information, click here. (1969609)

 

Leftovers

1. Fixed a situation where the leftover continued to be displayed as used even when it was no longer being used in the cutting plan. For more information on how to save and use leftovers, click here. (2024822)

 

09/27/2023 | Connect | 2.2.14.0

To check more information about the Connect release, click here.

 

09/27/2023 | Promob | 5.60.23.0

 

 

 

 

09/04/2023 | Promob Start | V.13 R.9

Hardware

1. Included the Corner L hardware as a new fastening option for partitions and fixed shelves, available in all product lines.

• From now on, it is possible to change the fixing option and maximum measurement between fixings for shelves and partitions via: Feature configurator > Hardware and fasteners > Fasteners > Specific line > Shelves / Divisions.

• The Corner L can be configured for positioning, depth, and screw diameter in Hardware and Fasteners – Hardware and Fasteners – Corner L.

 

Features Configurator

1. The images of the Features Configurator have been updated. In the Cabinets - Corners / Counters tab, the described improvements have been implemented. (2030116)

• The description of attribute 'A' has been updated to indicate its relation to corner modules.
• The image available in the Features Configurator has also been updated.

 

2. In the Wall tab, the following modifications have been made:

• The Side Type attribute has been removed.
• The image in the Features Configurator has been updated.

 

3. In the Tall tab, the following modifications have been made:

• The description of attribute 'A' has been updated to indicate its relationship with corner modules.
• The image in the Features Configurator has been updated.

 

Product Spreadsheet

1. Information about the use of screws has been added to the Product Spreadsheet. (2023574)

To check more information about the Promob Start release, click here.

 

 

09/04/2023 | Promob Maker BR | V.13 R.9

Hardware

1. Included the Corner L hardware as a new fastening option for partitions and fixed shelves, available in all product lines.

• From now on, it is possible to change the fixing option and maximum measurement between fixings for shelves and partitions via: Feature configurator > Hardware and fasteners > Fasteners > Specific line > Shelves / Divisions.

• The Corner L can be configured for positioning, depth, and screw diameter in Hardware and Fasteners – Hardware and Fasteners – Corner L.

 

Features Configurator

1. The images of the Features Configurator have been updated. In the Cabinets - Corners / Counters tab, the described improvements have been implemented. (2030116)

• The description of attribute 'A' has been updated to indicate its relation to corner modules.
• The image available in the Features Configurator has also been updated.

 

2. In the Wall tab, the following modifications have been made:

• The Side Type attribute has been removed.
• The image in the Features Configurator has been updated.

 

3. In the Tall tab, the following modifications have been made:

• The description of attribute 'A' has been updated to indicate its relationship with corner modules.
• The image in the Features Configurator has been updated.

To check more information about the Promob Maker BR release, click here.

 

 

08/23/2023 | 2020 Manager | 9.2.0

Supplier Portal - Integration Support

1. Implemented improvements to support SupplierPortal integrations. (89536)

2. The information from the supplier has been added to the purchase order response. (89536)

3. Added functionality to display Purchase Order events in EventCenter. (89536)

 

Terms and Conditions in the App Installer

1. After integrating the new login screen, the text By continuing, you are indicating that you accept our Terms of Service and Privacy Policy is displayed at the bottom of the page. By clicking on the Terms of Service and Privacy Policy hyperlinks, the respective pages are opened in the cell phone's default browser. (89540)

 

Support Tool | UI Enhancements for user feedback

1. Added a new feedback type for suggestions. Now, options are larger, the comments field is optional, and a screenshot is required for the feedback. (89544)

 

Support Tool | UI Enhancements

1. Changed the menu option from Home to Access, with a new icon. (89544)
2. Modified the layout for improved visualization.

 

Support Tool | UI Enhancements for accessing Support

1. Changes have been made to the Menu and Header. (89544)

2. The results have been filtered according to the type of login (Promob or 2020). (89544)

3. New filter options have been added (company, date, status and type). (89544)

4. The details screen has been improved. (89544)

5. The term Completed has been replaced by Resolved. (89544)

6. A new column for Resolved by has been added, indicating the user responsible for resolving the feedback. (89544)

7. Added a resolution field in the details dialog, necessary to mark feedback as resolved. (89544)

8. It is now possible to reopen feedback that has been marked as resolved. (89544)

 

Support Tool | Enhancements to the export of feedback to .csv

1. A new option has been introduced to export user feedback to a .csv file. (89544)

 

New UI Cyncly for the Installers App

1. A new profile page has been developed, allowing users to manage their Personal Information, Working Schedule, Portfolio and Language of the application. Below is an image of the new page. (89644)

2. With the new login screen in the Installers App, the Delete my account feature has been implemented. When the user chooses to click Delete my account, a double confirmation is requested:

• In the first place: by typing the word Delete in the dialog box of a pop-up window that provides important information about the consequences of deleting the account;
• In the second place: confirming that this action is irreversible.

IMPORTANT: After this confirmation is completed, the account is deleted and the user is logged out. If you wish to log in again, you will need to create a new account.

 

Installers App

1. The company list on the installers app now includes all companies. (89543)

2. The companies looking for installers are now identified by a badge.

3. Companies connected are now prioritized in the exhibition.

 

Improvements for Company information screen in the Installers App

1. Implemented improvements to the search for companies and the involvement of companies in the Installers App. (89543)

 

Calls to Actions Related to Installers in 2020 Manager
1. Now, when clicking on an installer notification in a Free-type company, a dialog box opens to update the system. (89543)

 

Standardization of listing | Sales - Commissions

1. The Commissions page uses the same stylization as the NA Home page applied to the table and its Search bar + Filter button. (89546)

 

Standardization of listing | Sales - Surveys

1. The Surveys page uses the same stylization as the NA Home page applied to the table and its Search bar + Filter button. (89546)

 

Standardization of listing | Sales - Operations
1. The Operations page uses the same stylization as the NA Home page applied to the table and its Search bar + Filter button. (89546)

 

Standardization of listing | Settings - Sales - Commissions
1. The Settings - Sales - Commissions page uses the same stylization as the NA Home page applied to the table and its Search bar + Filter button. (89546)

For more information on the 2020 Manager Review Release Notes, click here.

 

 

22/08/2023 | Cut Pro | 1.2.5.14

Cutting plan

1. Improvement to the cutting plane has been implemented, allowing each material to be processed with a different cutting parameter setting. For more information, click here. (1693133, 1506866)

 

 

2. A new cutting optimization method has been implemented, based on the length of the cut and the addition of the quantity of phases used in the cutting plan. To enable this, the Optimize Saw Movement menu has been provided. For more information, click here.

 

Operations

1. improvement implemented that allows machining operations imported from Promob Start to be viewed in Cut Pro. Cut preview, technical drawings, label image and DXF will now display machining operations in addition to other operations. (1913571,1515580)

 

 

Printing

1. Added the Use capital letters option to the print screen, so that reports can be displayed in capital letters. For more information, click here.

 

 

To check out more information about what's new in the Release Notes for Cut Pro, click here.

 

 

 

 

08/14/2023 | Decore Online

Enhancements

1. Added 12 new items:

• Island Hood 08 in Appliances - Home Appliances - Hoods - Island Hoods
  
• Mirror 13 in Decoration - Mirros
• Mirror 14 in Decoration - Mirros
• Bench 10 in Furniture - Chairs - Stools
• Bench 11 in Furniture - Chairs - Stools
• Bench 12 in Furniture - Chairs - Stools
• Bench 13 in Furniture - Chairs - Stools
• Bench 14 in Furniture - Chairs - Stools
• Bench 15 in Furniture - Chairs - Stools
• Basket 12 in Organizers - Boxes
• Basket 13 in Organizers - Boxes
• Towel 13 in Clothing - Towels

To check out more information about what's new in the Release Notes for Decore Online, click here.

 

 

08/14/2023 | Connect | 2.2.11.0

To check more information about the Connect release, click here.

 

 

08/14/2023 | Promob | 5.60.21.1

 

08/10/2023 | 2020 Manager | 9.1.0

Installer App
1. New integration screen on first login. (89538)

 

New UI Cyncly for the Installer App
1. The Installer App has been revamped and is now called Cyncly Installers. With the rebranding, all major app pages have been recreated with a new UI and enhanced user experience. (89541)

• Home Screen;
• Profile;
• Profile - Work Schedule;
• Profile - Portfolio;
• Project Chat;
• Chat;
• My Requests;
• Installation Details;
• Schedule;
• Companies;
• Company Details.

 

Standardization of Listing | Leads - Contacts
1. Changed the contacts page to better follow the system's list standard and have improved filter functionality. The contact list itself appears as in the following image: (89546)

For more information on the 2020 Manager Review Release Notes, click here.

 

07/31/2023 | System Review of Plus Professional, Plus Enterprise and Academic | 23.08

1. Available improvement in the Dimensions Configurator in which it is now possible to individually change the thickness of the Shelf w/ Slider through parameter E. (1994341)

For more information on the System Review Release Notes, click here.

 

07/25/2023 | Promob Maker BR and Start | V.13 R.7

Dimensions Configurator

1. Available the option of Cava handle in MDF in the line of Kitchen Cava for the Lower and Pantry modules. In addition to the handle height settings, the Cava MDF allows for thickness and edge banding adjustments. For the Upper units, there is the option of using or not using the Cava Aluminum handle, as well as the option to recess the base when the handle is not used.

2. Available the option to define the distance between the end of the internal drawers amount and the end of the module in the Kitchens, Bedrooms and Offices lines. This setting can be found in:

• Kitchens: Engineering > Drawers > Retractor > Retractor Rear Distance;
• Bedrooms: Engineering > Drawers > Retractor > Assembly > Retractor Rear Distance;
• Offices: Engineering > Drawers > Retractor > Assembly > Retractor Rear Distance.

3. Included a new configuration option for the fasteners position, subdivided according to the specific lines. It is now possible to individually set the positioning of the fasteners in:

• Hardware and Fasteners: Fasteners > Fasteners Position, Fasteners Position Shelves, Fasteners Position Back Panels, Fasteners Position Crossbars, Fixation Nails / Clips / Screws.

4. Available new settings to define the Accessories and Hardware code in Assembly - Codes - Accessories and General Assembly - Hardware.

NOTE: When changing the default item codes, it is necessary to update them in the Product Spreadsheet.

5. Available settings to define the maximum depth of external drawers in Assembly General - Structures.

6. Added possibility to remove the front face of the Drawers Internal Non-Fronts available in the modules of the Kitchens, Bedrooms and Offices lines of the Cabinet Builder. Now, the front faces of the drawers without fronts are also removed. This configuration existed for the other drawer models with fronts.

7. Modified the name of the Cabinets folder to Cabinets and Corners for better interpretation in the Bedrooms - Engineering - Structure - Wardrobes / Corners menu. (1999514)

8. Added a new setting that allows changing the thickness of the back crossbars of Sliding Top Cabinets in the Bedroom line. This setting is available in the Dimension Configurator, in Bedrooms - Thicknesses - Boxes - Wardrobes - Wall Sliding - Back Crossbar (I).

9. Included a new configuration that allows to remove the Internal Crossbar for blind corner in the Kitchens, Kitchen Cava and Bedroom lines.

 

Models

1. Available a new door model in the Provence style. The technical drawing of the door is standard, just like that of a straight door, which means that no separate parts are generated due to the different manufacturing processes. In the budget, the item Provence operation is included to define the additional costs related to the production of the door in Provence style.

 

Modulation

1. Added to the Handles tab the Cava Profile options, which are used in the Cava line modules. It is now possible to use them individually. In addition, the handles integrated with door and front models have been reorganized into a specific folder called Integrated. This organization facilitates the location and selection of integrated handles. (2010373)

 

Cabinets Builder

1. The maximum depth value has been standardized to 1800 mm in the Lower and Upper Kitchen and Kitchen Lateral modules of the Cabinet Builder. (2013357)

 

Partners

1. Updated the finishes of the Berneck partner with the inclusion of the following finishes. (1958181)

Sense Collection:

• Baru
• Nogal Artezzano
• Taupe

 

2. Updated the finishes of the partner Arauco with the inclusion of the following finishes. (1978826, 2003284 and 2005041)

Synesthesia Collection:

• Lavender - Matt
• Ocean - Matt

• Bamboo - Nature

• Real Ipe - Trend

• Almond - Bold
• Coast - Bold

• Wood - Vert
• Dew - Vert
• Waterfront - Vert
• Silicon - Vert

 

3. Completed the inclusion of Duratex partner finishes, as follows:

New Standards:

• Dian Oak - Line Prisma
• Lir Oak - Line Prisma

New Category Internal:

• Aurora - Line Trama
• Gianduja - Line Trama
• Straw - Line Trama
• Titanium - Line Trama
• Dian Oak - Line Prisma
• Lir Oak - Line Prisma

 

Plugins

1. Realized the association of all parts of the library with the following plugins: (2012511 and 2019355)

 

• Plugin TekMaq 3020 Mach2 Router
• Plugin Jaragua Compact Eding CNC Router

 

To check more information about the Promob Maker BR release, click here.

To check more information about the Promob Start release, click here.

 

 

 

07/12/2023 | System Review of Plus Professional, Plus Enterprise and Academic | 23.07

For more information on the System Review Release Notes, click here.

 

 

07/11/2023 | Builder | 1.60.20.0

ERP Integration

1. Created the ImportKey tag in the integration XML for Default ERPs, Promob ERP, Promob ERP Start, Insight, and Speedy Factory, containing the import key for the Connect project. For more information, click here.

To check out more information about what's new in the Release Notes for Builder, click here.

 

 

07/10/2023 | Catalog | 5.60.1.64

Register

1. Added fields to register the Notification URL and Cart URL, in the registration of online order budget. For more information, click here.

 

To check more information about the Catalog release, click here.

 

 

07/10/2023 | Promob | 5.60.20.1

 

 

06/30/2023 | Decore Online

1. Added 06 new items:

• Armchair 23 in Upholstery – Contemporary - Armchairs
  
• 2S Couch 14 in Upholstery – Contemporary - Sofas
• 3S Couch 21 in Upholstery – Contemporary - Sofas
• Pizza Oven 02 02 in Barbecue
• Water Tap 19 in Kitchens – Taps and Faucets
• Curtain 22 in Curtains

To check out more information about what's new in the Release Notes for Decore Online, click here.

 

 

06/27/2023 | Promob Maker BR and Start | V.13 R.6

Dimensions Configurator

1. The reorganization of gap settings for Light Internal Sliding Doors in Kitchens, Bathrooms, and Bedrooms has been made. Now, it is possible to configure the top gap and the bottom gap separately.

 

Product Guide

1. Adjusted the description of the Product Guide in the Cava Kitchens line, so that the information is clear about the structure of the machined cabinet box, where the cava is made on the sides and not on the doors.

 

Modulation

1. Added the option for edge banding application to the 6mm and 9mm individual panels through the Properties tab. (1970016)

2. Changed from 176 mm to 186 mm the standard value of the height of the front of the first drawer of the 1G + 1 Drawer Can Holder module in the Kitchen line. This change was made to align the drawers with the other drawer modules.

 

To check more information about the Promob Maker BR release, click here.

To check more information about the Promob Start release, click here.

 

 

07/06/2023 | Builder |1.60.18.1

Machine Plugin

1. Added Biesse Rover A 1542 machine plugin.
2. Added Rhino RMC 3000 Absolute Mach3 Router machine plugin.

 

Machine programs

1. Created option in the setup so that the customer can choose the behavior of the through-machining operations. Now, it is possible to select whether the through-machining operations will behave as Contour, Pocket, or follow the machining registration. For more information, click here. (1987745)

 

CNC Configuration

1. Created option to edit the complete label of CNC machines. Now, it is possible to customize and modify information contained in the label according to user needs and preferences.

 

Working area

1. A verification has been implemented in the desktop to identify if the fields Name and Identifier contain special characters.

 

For more information about the Release, click here.

 

05/29/2023 | Promob Maker BR and Start | V.13 R.3

Features Configurator

1. Added new visibility condition attributes, created for the Features Configurator accessories, available in Assembly - Accessories Cabinet Builder - Visibility Condition.

2. Added new dimension insertion restriction attributes for Features Configurator accessories. Thus, it is possible to choose the dimension of the restriction through the settings in Assembly - Accessories Cabinet Builder - Dimensions - Kitchen/ Bedrooms.

3. Available Side Panel Retreat option, for Library and Cabinet Builder modules in all lines, available in Engineering - Structure - Dimensions/Reveals configurations on all modules.

4. Available in the lines of Kitchens, Kitchens Cava, Bathrooms, Bedrooms and Offices, options for setting the face of insertion of fasteners, being Internal or External fixation, located through the configurations in Hardware and Fasteners - Fasteners - Kitchens/Bedrooms/Bathrooms/Offices - Bases/Sides/Baseboards/Crossbar.

 

NOTES:

• When changing the type of assembly of the module between Internal Side and External Side, the fixing hardware on the base or side parts is also changed. That is, when mounting with internal side, the part that receives the fixing hardware is the side, and when the assembly is done with external side, the part that receives the fixing hardware is the base.
• When using through hardware and changing the positioning of fasteners, the module will need to be reinserted.

 

5. Available setting to define the upper distance of the drawer body from the handle for drawers with Profile Y.

6. An option has been added where you can configure the front setback of the shelves. These configurations are located in General Assembly\Setbacks\Front Setback of Shelves.

7. The settings related to closures in cabinets with internal sliding systems have been reorganized. Now it is possible to identify the configurations that are applicable only to closures used in sliding systems or when they are applicable to both types of sliding systems. (1994584)

 

Cabinet Builder

1. Partial partition option has been made available for the Cabinet Builder modules that have swing doors and partition options. The partition can be resized in Kitchens/Bedrooms/Offices - Engineering - Structures - Dimensions/Distances.

 

NOTES:

• For correct operation, it is necessary to use the specific shelf for partial partitions. For this, three types of shelves were made available, where each one should be used according to its nomenclature: Left, Central and Right.

• For the proper functioning of the shelves for partial division in column modules, use the shelf in one of two gaps of the module (one part with full depth or one part with column);

• By default, in U-column modules, when placing the shelf on the column, due to system limitations, the depth of the shelf is not calculated. This happens because each part of the left, center and right shelf has a different value when using the functionality of joining the pieces, where the depth of one of them is automatically considered. Therefore, they can be small in depth or one different from the other or even all with the maximum depth of the module.

 

 

Modulation

1. Four new lower modules for Bedrooms are now available. All of them come with the option of external or internal sides. They can be inserted into the environment through the Cabinet Builder or Library. The configurations can be found in Bedrooms - Engineering - Structure - Countertops - Corners/Counters. Bedrooms - Engineering - Clearances - Countertops. Bedrooms - Engineering - Clearances - Built-in Doors, and Bedrooms - Thickness - Boxes - Countertops/Counters - With Doors.

• Swing Door Counter with Upper Base
• Sliding Door Counter with Upper
• Base Swing Door Counter
• Sliding Door Counter

 

2. Available in the modules of the Dormitory line, option of plastic feet, which can be inserted through the automatic function, for the items of the Library and through the Components for items of the Cabinet Builder.

 

3. Added improved edge application. It is now possible to view the raw MDF in the 3D environment where the tape finish is removed.

4. Updated in the Cava line, the images of the Doors/ Fronts, to be smooth without handles.

 

Materials

1. Included in the Glass options the Corrugated models, available in Materials - Glasses - Miscellaneous - Corrugated.

 

Partners

1. Available in the partner Duratex new materials, being them the Cinza Fóssil, Gianduia Natural, Moss, Nazca e Quartzo Bienna, available in the line Velluto. In the Design line the new material available is the Nogueira Flórida. (1936877)

 

Integration ERP
1. Improvements in the registration of all items to facilitate the integration process between the library and the ERP.

 

Plugins

1. Performed the association of all parts of the library with the following plugins. (196612 e 1991779):

• Plugin Mak Pro 3000 Mach3 Router
• Plugin Rhino RMC 3000 Absolute Mach3 Router
• Plugin Marchiori LD 3000 Mach3 Router
• Plugin Sideco SIR 1325 ATC Router
• Plugin ShopSabre 4896 Router

 

To check more information about the Promob Maker BR release, click here.

To check more information about the Promob Start release, click here.

 

 

05/17/2023 | System Revision Plus Professional, Plus Enterprise and Academic | 23.05

For more information on the System Review Release Notes, click here.

 

05/12/2023 | Connect | 2.2.11.0

Import/Export design

1. Updated the screen Import/Export design. For more information click here.

To check more information about the Connect release, click here.

 

 

05/09/2023 | Cut Pro | 1.2.5.12

Cut Managers

1. Added new functionality regarding the labels from the Inmes Cut/Automatic Cutting Manager, in which it allows the selection of information that can be sent to the cutting manager to print the labels. For more information click here. (1948617 and 1855383)

To check out more information about what's new in the Release Notes for Cut Pro, click here.

 

 

05/08/2023 | Plugin Central Promob | 1.0.12

1. When clicking on the Chat option, the Central window referring to this option is expanded for better viewing.

To check out more information about what's new in the Release Notes for plugin Central Promob, click here.

 

05/08/2023 | Decore Online

1. Added 12 new items:

• Toy 34 in Infant - Toys
  
• Toy 35 in Infant - Toys
• Toy 36 in Infant - Toys
• Toy 37 in Infant - Toys
• Toy 38 in Infant - Toys
• Toy 39 in Infant - Toys
• Toy 40 in Infant - Toys
• Toy 41 in Infant - Toys
• Toy 42 in Infant - Toys
• Toy 43 in Infant - Toys
• Vacuum Cleaner 08 in Appliances - Small Appliances
• Person 11 in Humanization - People - Sit Down

To check out more information about what's new in the Release Notes for Decore Online, click here.

 

 

 

 

20/04/2023 | 2020 Manager | 8.0.0

Re-expose price information in transactions
1. Pricing information is now better represented on a transaction page. The new information can be found by accessing the details of an environment that has the type of information available. 

To check out more information about what's new in the Release Notes for Maker, click here.

 

 

10/04/2022 | Maker | 1.2.1.4

Reports and budget

1. Added the option to upload the client logo, with this option, the client can import their logo into Maker. For more information, click here.

To check out more information about what's new in the Release Notes for Maker, click here.

 

 

06/04/2023 | Worker | 6.60.17.3

 

05/04/2022 | Builder | 1.60.17.7

Builder Parts
1. Added option that allows Save Parts Online. For more information click here. (1878706 e 1755755)


Builder
1. It is possible to duplicate operations in the Builder Tab. For more information click here. (1873790)

To check out more information about what's new in the Release Notes for Builder, click here.

 

 

27/03/2023 | 2020 Manager | 7.4.0

Document files in chat 

1. It is now possible to send .pdf, .docx and .dox files to chats, both in the system and in the application. The .pdf files can be viewed in both, but .docx and .doc files cannot. All these types of files can be downloaded for better viewing. To access the chat in the system, the user needs to click on the chat icon: (77925)

 

2. After choosing the chat you want to interact with, you can click on the add files icon and choose the files you want to add to the chat.

 

3. After clicking on the mentioned icon, the user must select the files he wants to send in the chat. You can send images and .pdf, .docx and .doc files.

4. Image chat balloons have been changed, they are now bigger, making it easier to see what it is about without having to check it out in the gallery:

 

5. The chat bubble for a .pdf file will look like this: 

 

6. Clicking on the eye icon opens a window in which the user can better view the file content, download or even print.

 

7. The .doc and .docx files are sent in similar chat balloons and look like this:

8. The download icon, representing the file in the message, indicates that it can be downloaded by clicking on the message.

 

9. In the app, the process is a little different. Chats can be found in two different places, the first is in the top menu.

 

10. The user needs to choose one of the available chats. The other place you can find chats is by clicking on the My Facilities icon.

 

11. You must choose an installation and select the Chat tab. On the Chat screen, there will be an attachments icon and from there the user will be able to add .pdf, .docx and .doc files.

 

12. The .pdf files will look like this:

 

13. By clicking on the message, a window in which the user can view the .pdf and download it opens:

 

14. The .docx and .doc will look like this:

 

15. Clicking on it will open a window where the user can download it:

 

To check more information about the 2020 Manager release, click here.

 

 

22/03/2023 | Cut Pro | 1.2.5.11

Lista de la compra

1. Añadido a la lista de compras, información de longitud y número de corte, así como opciones para habilitar y deshabilitar las vistas de Accesorios. Para más información, pulse aquí. 

To check out more information about what's new in the Release Notes for Cut Pro, click here.

 

 

 

03/15/2023 | Decore Online

1. Added 05 new items:

• Clock 18 in Decoration - Clocks
• Clock 19 in Decoration - Clocks
• Clock 20 in Decoration - Clocks
• Bed 03 in Commercial Spaces - Hospital and Dental
• Basket 04 in Kitchens - Utensils - Trays | Baskets | Boards

To check out more information about what's new in the Release Notes for Decore Online, click here.

 

 

02/09/2023 | Decore Online

1. Added 07 new items:

• Sink 11 in Kitchens - Sinks and Counters - Sinks
• Sink 12 in Kitchens - Sinks and Counters - Sinks
• Table Center 01 in Kitchens - Utensils - Trays | Baskets | Boards
• Container 04 in Kitchens - Utensils - Containers
• Coffee Machine 08 in Appliances - Small Appliances
• Fan 09 in Appliances - Air Conditioning
• Water Heater 05 in Appliances - Air Conditioning

 

To check out more information about what's new in the Release Notes for Decore Online, click here.

 

 

02/09/2023 | Connect | 2.2.9.17

Projects

1. Added the option to view the Negotiation Status of projects. For more information click here.

To check more information about the Connect release, click here.

 

 

01/30/2023 | Worker | 6.60.17.2

1. Added a screen to view event logs of Worker processing. For more information clickhere. 

 

To check out more information about what's new in the Release Notes for Worker, click here.

 

 

01/18/2023 | Maker BR | V.1 R.1.34

Materiais

1. Reorganizada as linhas do parceiro Greenplac:

• Linha Toccare: Dividida em duas linhas, sendo elas, Toccare Colore e Toccare Texture;

 

• Linha Essenziale: Movidos os materiais Bali e Freijó Amazonas da linha Essenziale para a Linha Natural;

 

Parceiros

1. Atualizada a referência do item Amort. p/ dob MODUL para 31021531, referente a Dobradiça Blum Amort+Modul do parceiro Blum.

 

Ferragens

1. Disponibilizado novas opções de configurações para as ferragens VB 35M e VB 36M, disponíveis em Configurador de Dimensões - Ferragens - VB. Sendo possível ajustes individualmente, conforme a espessura da chapa, profundidade, diâmetro e posicionamento de todos os furos das ferragens descritas.

 

Associação de plugins

1. Realizada a associação de todos os itens da biblioteca com o Plugin Homag Weeke Venture 230M.

 

To check out more information about what's new in the Release Notes for Maker BR, click here.

 

01/18/2023 | Start | V.12 R.1.35

Cabinet Builder

1. It is available in the Kitchens, Bedrooms, and Offices lines, the option to insert Drawers - Internal Without Front, making it possible to set the gaps in the Dimension Configurator, available in Assembly - Gap Fronts / Doors - Internal Drawers.

 

Materials

1. Reorganized the partner Greenplac lines:

• Toccare Line: Divided into two lines, Toccare Colore and Toccare Texture;

• Essenziale Line: Moved the Bali and Freijó Amazonas materials from the Essenziale line to the Natural Line;

 

Partners

1. Updated the reference of the item Amort. p/ dob MODUL to 31021531, referring to the Blum hinge Amort+Modul from Blum partner.

 

Hardware

1. Available new configuration options for VB 35M and VB 36M fittings, available in Feature Configurator - Hardware - VB. It is possible to adjust individually, according to plate thickness, depth, diameter, and positioning of all holes of the hardware described.

 

Plugin association

1. All parts of the library have been associated with the Homag Weeke Venture 230M Plugin. (1940712)

 

To check out more information about what's new in the Release Notes for Start, click here.

 

01/10/2023 | Worker | 6.60.17.1

Worker

1. Added validation of minimum computer requirements that will notify on the Worker screen if the computer does not meet the requirements. For more information, click here. 

 

To check out more information about what's new in the Release Notes for Worker, click here.

 

01/10/2023| Connect | 2.2.9.7

Charts

1. Added the option to view graphics in Promob. For more information, click here. 

 

To check out more information about what's new in the Release Notes for Connect, click here.

 

01/09/2023 | Decore Online

1. Added 04 new items:

• Firewood 02 in Fireplaces
• Stove 4B 07 in Electros- Stoves
• Stove 4B 08 in Electros- Stoves
• Coffee Machine 07 in Electros- Small Appliances

To check out more information about what's new in the Release Notes for Decore Online, click here.

 

 

01/05/2023 | Cut Pro | 1.2.5.8

Cut Manager

1. Added new Editable Fixed Text field, to edit free text at the time of label printing in the cut manager. Available for Gvision, Presizing, CadMatic. (1865834)

 

Labels

1. Added new Model Type functionality, being only User Model or Shared Model between accounts. For more information click here.

 

Reports 

1. Updated the Cutting Plan reports are now generated, using the Cutting Plan Drafter service to generate the reports.

 

Performance

1. Improved performance in Cut Pro - RelayCommand.

 

To check out more information about what's new in the Release Notes for Cut Pro, click here.

 

12/01/2022 | Maker | 1.2.1.2

Models Register 

1. Added a feature where it is possible for users to register wild card templates. For more information, see the article Maker - Materials with Registered Templates.

Cut plan

1. Created options for importing and exporting the price list in the price configurator. For more information, see the article Maker - Import and Export Price List.

To check out more information about what's new in the Release Notes for Maker, click here.

 

11/30/2022 | Start | V.12 R1.34

Modulation

1. Changed the default insertion value from 720 mm to 760 mm, in all modules of the Kitchens, Bedrooms, and Bathrooms line (1932889 and 1932861)

IMPORTANT: The change made aims to enable the availability of all models of fronts on drawer modules. Still, for some modules that have different structures, the models may become unavailable when inserting them with this standard measure. To enable, just resize the module, or check configurations that interfere with gaps and heights of the fronts.

 

2. New modules made available, Niche for Built-in Stove w/ Baseboard and Niche for Built-in Stove without Baseboard, in the Kitchens – Lower – for Electrics line. The niche without plinth has a base and allows machining configuration, the niche with plinth does not have base, therefore, it allows the circulation of the air of the stove. For the two niches, the configuration of machining on the upper base, on the front panel and on the rear vent is available.

 

 

 

Features Configurator

1. Reorganized the attributes of sliding systems for better identification in Dorms – Assembly – System of Sliding Doors.

 

 

2. Available option to register the machining advance of the Cava handle on the sides of the module of the Cava Kitchens line in Kitchens - Cava Kitchens -  Milling Cava Handle. (1926579)

 

 

3. Information provided in the description of attribute F - Minimum Height of the Drawer in General Assembly – Drawers - Drawer Structures.

 

4. Configuration to set the drawer slide advance in relation to the drawer body depth, as well as set the drawer body indentation, is available under Hardware - Invisible Slide - General.

IMPORTANT: The default size of the slide feed is 10 mm. This enhancement does not impact changing the runner dimension when generating budgets or generating integration files. The runner is displayed with the default dimensions, relative to the drawer body size in the project.

 

 

 

 

5. Diameter and depth settings for screws of slides, hinges, drawers and front of drawers are available. In addition, in the configuration, you can set the description of the screw dimensions and customize the code to be displayed in exported documents (1867611, 1868820 and 1836988)

 

NOTES:

• For the accounting and display of the screw of hinges and slides to occur in the material reports and budget, it is necessary to set the configuration of the screw budget to Set instead of Kit in Hardware - Hinge Budget/Hinge Budget.
• For displaying and accounting of the screw in the budget and report, the system respects only the information registered in the configurator (Reference - Code - Diameter x Depth), therefore, when registering the screw dimensions, it is important to consider the sheet thickness to be used. Otherwise, the system defines another compatible measure and the screw is not accounted for in the material report or budget.

 

 

 

Aggregates
1. New option of piston with reverse force has been made available for overhead doors of the Kitchens, Kitchens Cava, Dormitories and Offices lines. With this option, when generating the budget and integration documents, it will be possible to differentiate the conventional piston, PIST, and the piston with reverse force, PISTINV.

 

 

Partners
1. New materials from our partner Guararapes are available: Fog and Night from the Aris line, Tropical Pine from the Madeiras do Brasil line, Dual Blanc and Porto from the Dual Touch line, Oliva from the Metalic line, Carvalho Terrazo, Cioccolato, Nairobi and Nogal Gris from the Naturale line, Jeans and Papyrus from the Comfort line.

 

 

Closets Builder

1. New construction option available, External Sliding Doors w/ Baseboard w/ Closing w/ Partitions in the Bedroom and Bedroom internal side line. This option makes it possible:

• Use closure on external sliding door closets.
• Configure the closure and sideboard types in the Dimension Configurator, in attribute K.

 

Product Guide

1. Added slide with the specifications of the invisible slide settings.

falta essa imagem

 

 

2. Updated slides about Door models, for all lines, where there is now a note about models for Built-in drawers.

 

3. Slides about Fronts for internal drawer models of the Dormitory line have been updated, removing models with unfeasible profiles for them and adding an observation about Shoe Rack models and the use of the Close - Tip On model.

 

 

4. Added remarks about using pistons in tilters, on slides 101, 117, 125, 126, 162 and 171.
5. Updated the images on slides 192 to 195, regarding the slider options in the Closets Builder.

 

Plugin association

1. All parts of the library have been associated with the Usikraft Evoque 2030 ATC Router Plugin. (1940712)

 

To check out more information about what's new in the Release Notes for Start, click here.

 

30/11/2022 | Maker BR | V.1 R.33

Modulação

1. Alterado o valor padrão de inserção de 720 mm para 760 mm, em todos os módulos inferiores da linha de Cozinhas, Dormitórios e Banheiros. (1932889 e 1932861)

IMPORTANTE: A alteração feita visa possibilitar a disponibilização de todos os modelos de frentes em módulos de gaveteiros. Ainda assim, para alguns módulos que possuem estruturas diferentes, os modelos podem ficar indisponíveis ao inseri-los com esta medida padrão. Para habilitar, basta redimensionar o módulo, ou verificar configurações que interfere em folgas e alturas das frentes.

 

2. Disponibilizados novos módulos, Nicho p/Fogão Embutido c/ Rodapé e Nicho p/Fogão Embutido s/ Rodapé, na linha de Cozinhas – Inferiores – p/ Eletros. O nicho sem rodapé possui base e possibilita configuração de usinagem, o nicho com rodapé não possui base, pois, possibilita a circulação do ar do fogão. Para os dois nichos, está disponível a configuração das usinagens na base superior, do painel frontal e do respiro traseiro.

 

 

Configurador de Dimensões

1. Disponibilizada opção para cadastro de avanço de usinagem do puxador cava nas laterais de módulos da linha de Cozinhas Cava em Cozinhas - Cozinhas Cava - Usinagem Puxador Cava. (1926579)

 

 

2. Disponibilizada informação na descrição do atributo F - Altura Mínima da Gaveta em Montagem Geral – Gavetas - Estruturas Gavetas.

3. Disponibilizada configuração para definir avanço da corrediça invisível, em relação a profundidade do corpo da gaveta, assim como, definir o recuo do corpo da gaveta, em Ferragens – Corrediça Invisível – Geral.

IMPORTANTE: A medida padrão do avanço da corrediça é 10 mm. Esta melhoria não impacta na alteração da dimensão da corrediça ao gerar orçamento ou gerar arquivos de integração. A corrediça é exibida com as dimensões padrões, relativas ao tamanho do corpo da gaveta no projeto.

 

 

4. Disponibilizada configuração de diâmetro e profundidade para parafusos de corrediças, dobradiças, gavetas e frente de gavetas. Além disso, na configuração, é possível definir a descrição das dimensões do parafuso e personalizar o código a ser exibido nos documentos exportados. (1867611, 1868820 e 1836988)

 

 

 

OBSERVAÇÕES:

• Para que a contabilização e exibição do parafuso das dobradiças e corrediças ocorra nos relatórios de materiais e orçamento, é necessário estabelecer a configuração do orçamento do parafuso para Conjunto ao invés de Kit emFerragens - Orçamento Dobradiça/Orçamento Corrediça.
• Para exibição e contabilização do parafuso no orçamento e relatório, o sistema respeita apenas as informações cadastradas no configurador (Referência - Código - Diâmetro x Profundidade), portanto, ao cadastrar as dimensões do parafuso, é importante considerar a espessura da chapa a ser utilizada. Caso contrário, o sistema define uma outra medida compatível e o parafuso não é contabilizado no relatório de materiais ou orçamento.

 

 

5. Reorganizados os atributos de sistemas deslizantes para melhor identificação em Dormitórios – Montagem – Sistema de Portas Deslizantes.

 

Agregados
1. Disponibilizada nova opção de pistão com força inversa para portas superiores das linhas de Cozinhas, Cozinhas Cava, Dormitórios e Escritórios. Com esta opção, ao gerar o orçamento e documentos de integração, será possível diferenciar o pistão convencional, PIST e o pistão com força inversa, PISTINV.

 

 

Parceiros
1. Disponibilizado novos materiais do parceiro Guararapes: Neblina e Noite da linha Aris, Araucaria, da linha Madeiras do Brasil, Dual Blanc e Porto, da linha Dual Touch, Oliva, da linha Metalic, Carvalho Terrazo, Cioccolato, Nairobi e Nogal Gris, da linha Naturale, Jeans e Papyrus, da linha Comfort.

 

Construtor de Armários

1. Disponibilizada nova opção de construção, Portas Deslizantes Externas c/ Rodapé c/ Fechamento c/ Divisórias na linha de Dormitórios e Dormitórios Lateral Interna. Esta opção possibilita:

• Utilizar fechamento em armários de portas deslizantes externas.
• Configurar os tipos de fechamento e lateral no Configurador de Dimensões, no atributo K.

 

Guia de Produto

1.  Adicionado slide com as especificações das configurações de corrediça invisível.

 

2. Atualizados slides sobre modelos de Portas, para todas as linhas, onde agora, existe uma observação referente a modelos para gavetas Embutidas.

 

3. Atualizados slides sobre modelos de Frentes para gavetas internas da linha de Dormitórios, onde, foram retirados modelos de perfis inviáveis para estas e adicionada uma observação a respeito de modelos para Sapateiras e utilização do modelo Fecho – Toque.

 

4. Adicionado observações sobre utilização de pistões em basculantes, nos slides 101, 117, 125, 126, 162 e 171.
5. Atualizadas as imagens dos slides 192 a 195, referentes as opções de deslizantes no Construtor de Armários.

 

Associação de plugins

1. Realizada a associação de todas as peças da biblioteca com o Plugin Usikraft Evoque 2030 ATC Router. (1940712)

 

To check out more information about what's new in the Release Notes for Maker BR, click here.

 

11/25/2022 | Connect | 2.2.9

1. The option to list the client's designs was made available. For more information click here. 

 

To check out more information about what's new in the Release Notes for Connect, click here.

 

 

11/09/2022 | Cut Pro | 1.2.5.6

Project items

1. Added a new column in the parts listing, so it is possible to sort by the part ID. (1754151)

 

 

To check out more information about what's new in the Release Notes for Cut Pro, click here.

 

 

 

11/04/2022 | Start | V.12 R1.33

 

Aggregates

1. New aggregate available for central support in curved coat racks, named Support Central Coat Rack 02. It does not generate any technical information, but is sent to the budget and CSV.

 

Models

1. Available 6 new models of handles for Straight doors, Stem 37, Stem 38, Stem 39, Point 15, Point 16 and Point 17, following the order from left to right as shown in the image:

 

Closet builder

1. Enabled the default and automatic insertion of the Top View of Sliding Cabinets.

 

Product Guide

1. Added slide 203, which indicates the use of Shoe Racks with internal structure only. It is not possible to build shoe racks with an external or built-in structure.

 

2. Updated slides 53 and 55, regarding the addition of new handles.

 

Features Configurator

1. Minimum height configuration available for the chest of drawers.

IMPORTANT: The minimum height configuration of the drawer body is considered over the other configurations, such as the position of the fasteners, standard distance between them (32 mm) and values ​​of clearances between fronts. As well, it considers the minimum insertion measures of the different types of models of slides and fronts, therefore, be aware that the measure informed may disable models of fronts and slides. 2 fasteners on each front and rear side.

 

Plugin association

1. All parts of the library were associated with the Usaberg ATC 2819 Router Plugin.

2. All library parts were linked with the ETools Pro ATC 12 2030 Router Plugin.

 

Budget

1. Removed option Send to – XML File, for better integration with other Plugins.

IMPORTANT: Only removed for new serial numbers from this version.

 

11/03/2022 | 2020 Manager |6.1.0

Documento de información de la empresa

1. Se modificó la pantalla para mostrar todos los tipos de documentos en Documentos de información de la empresa cuando se utiliza un inicio de sesión de Promob. Al agregar un documento para una empresa que no pertenece a este tipo de persona, se le pedirá que cambie el tipo de persona de la empresa. (72217)

 

Cuenta y origen del producto
1. Ahora, cuando se crea una cuenta o factura, la empresa y el producto de origen se almacenan para su uso posterior. (72837)

 

Ordenar cuadro de diálogo
1. Se agregó el botón Dirección de Facturación en la pestaña de orden de compra.(73481)

 

Interfaz de usuario | Especificaciones del artículo de la orden de compra

1. Se movieron las especificaciones del artículo al cuadro de diálogo de edición del artículo. (73711)

 

InvoiceCode
1. Creada una página de pago que le permite ver terminales de pago sin tener que iniciar sesión. Para que esto sea posible, se generó un token (código de integración) vinculado a una factura y, después de algunas validaciones, es posible realizar pedidos. (73728)

IMPORTANTE: el token solo se puede solicitar utilizando una clave API válida utilizada para la integración

 

Supplier Portal y 2020 Manager
1. Se agregó el campoFecha de entregaen el tipo de entrega Envío gratuito. LaFecha de entregaahora es de solo lectura en el gerente de 2020 Manager. La fecha de entrega ahora se puede editar en el panel del proveedor. (74147)

 

10/27/2022 | 2020 Manager |6.0.0

Órdenes de Compra

1. Se ha eliminado el botón de Download y se ha integrado con el botón de impresión. (73215)

 

2. Se ha eliminado la información referente a las condiciones de pago en la pantalla de orden de compra en el 2020 Manager y el Supplier Portal. (73476)

 

3. Se ha cambiado el nombre del campo Términos de Pagos por el de Facturación y se ha añadido el campo Dirección de Facturación en el 2020 Manager y Supplier Portal. (73476)

 

4. Cambiado el comportamiento del campo Mensajes en el Orden de Compra, ahora se pueden añadir mensajes independientemente de la situación, Liberado, No liberado y Esperando liberación. (73505)

5. Ahora es posible deshacer los cambios realizados en el campo Transporte e Instalación sin tener que actualizar la pantalla del navegador. (74002)

 

 

 

10/26/2022 | Builder |1.60.17.2

Focco ERP

1. Added Drawing tag in Focco ERP XML, containing the path to the technical drawing.

New Plugins

1. New plugin available Biesse Comil Insider FT2.
2. New plugin available Biesse Rover K FT 1531 (Machining center CNC). For more information, click here.
3. New plugin available Weeke BHT500 (Machining center CNC). For more information, click here.
4. New plugin available - Usaberg ATC 2819 Router
5. Developed new plugin SPEEDY Factory. For more information, click here.

Pratika 1000, 310, 315, 320 and 325 machines.

1. Added the Absolute Head displacement option for Pratika machines, which uses the zero point of the total working area as a reference for displacement. The relative displacement that uses the zero point of the work area is maintained.

For more information, visit the article Builder - SCM - Pratika - Head Displacement.

Biesse machines with Bsuite integration

1. Added option to enable generation of CSV from Nesting files, when selecting the option of integration system with Nesting = Bsuite. (1744907)

For more information, visit the article Plugin Builder - Biesse Integration.

Worker Services

1. When installing the Worker services, so that the permissions are applied according to what each service needs, the login information of the administrator user of the computer is requested. (1781098)

To check out more information about what's new in the Release Notes for Builder, click here.

 

 

10/13/2022 | Maker |1.2.1.1

Budget

1. The users of Maker Automate can now restrict which budgets Maker Design users will have access to, and which budgets they will be able to print. For more information, click here.

 

 

Cut plan

1. Added in the material description, the category code of the selected material.

2. Creating the option to display the expiration date information of the material on the screen of materials with models registered. For more information,click here.

To check out more information about what's new in the Release Notes for Maker, clickhere.

 

 

 

10/13/2022 | Promob |5.60.17.11

 

 

10/13/2022 | Catalog |5.60.1.52

Budget

1. Added option to save before generating quotes. For more information clickhere.

To check more information about the Catalog release, clickhere.

 

 

10/10/2022 | Decore Online

1. Added 06 new items:

• Water Tap 18 inKitchens – Taps and Faucets
• Laundry Tank 09 inLaundry - Laundry Sinks
• Laundry Tank 10 inLaundry - Laundry Sinks
• Mirror 12 inDecoration - Mirros
• Drinking Fountain 04 inOffices - Waste Disposal and Water Fountains
• Transporte Box 02 inPet - Accessories

To check out more information about what's new in the Release Notes for Decore, clickhere.

 

 

09/21/2022 | Cut Pro | 1.2.5.5

Projects

1. Addition of a message when deleting the project, informing the user that there are leftovers originated by the project that will be deleted when proceeding with the operation.

 

 

To check out more information about what's new in the Release Notes for Cut Pro, click here.

 

 

 

08/31/2022 | Builder |1.60.16.18

Builder Parts

1. Created validation of overlapping points when creating a part in Builder Parts.Thus assisting the user when creating a semicircle correctly. For more information clickhereandhere.

To check out more information about what's new in the Release Notes for Builder, clickhere.

 

 

 

08/29/2022 | Decore Online

1. Added 10 new items:

• Piano 02 inMusical Instruments
• Female Mannequin 07 inCommercial Spaces - Store - Mannequins
• Female Mannequin 08 inCommercial Spaces - Store - Mannequins
• Female Mannequin 09 inCommercial Spaces - Store - Mannequins
• Female Mannequin 10 inCommercial Spaces - Store - Mannequins
• Male Mannequin 06 inCommercial Spaces - Store - Mannequins
• Luminaire 22 inLuminaire - Sconces
• Luminaire 23 inLuminaire - Sconces
• Luminaire 24 inLuminaire - Sconces
• Pendant 42 inLuminaire - Pendents

To check out more information about what's new in the Release Notes for Decore, clickhere.

 

 

 

08/18/2022 | Start | V12 R1.29

Modulation

1. Added a new Lift up Module + Drawer module, in theBathroom - Lower - Drawerline.

 

To check out more information about what's new in the Release Notes for Start, clickhere.

 

 

 

 

08/15/2022 | Decore Online

1. Added 10 new items:

• Bathtub 13 inBethrooms – Bathtubs
• Bathtub 13 inBethrooms – Bathtubs
• Toilet 12 inBethrooms - Toilets
• Toilet 13 inBethrooms - Toilets
• Bidet 05 inBethrooms - Toilets
• Water Tap 16 inKitchens – Taps and Faucets
• Water Tap 17 inKitchens – Taps and Faucets
• Sangria 01 inKitchens – Foods
• Easy Chair 08 inUpholstery – Contemporary - Chaises
• Luminaire 21 inLights - Luminaire

To check out more information about what's new in the Release Notes for Decore, clickhere.

 

 

 

08/08/2022 | Worker | 6.60.0.18

Configuration
1. Changed the name of the project queue service from QueueService to QueueProject in the Worker screens.

To check out more information about what's new in the Release Notes for Worker, click here.

 

 

 

07/20/2021 | Builder |1.60.16.17

Export of settings

1. Improved the export and import of Plugins Builder settings according to the new file structure. For more information clickhere.

 

 

To check out more information about what's new in the Release Notes for Builder, click here.

 

07/06/2022 | Connect |2.1.24

Project Status

1. Update icons available for better identification of the action, in the Status tab, in Project Details and in the Status option, in the Project Filters screen. The Finished situation received a new icon and the Converted situation received its old icon.

 

 

Design Details

1. Available for manufacturing users, option to integrate with Promob Worker. For more informations, click here. 

 

 

To check out more information about what's new in the Release Notes for Connect, click here.

 

 

07/05/2022 | Worker | 6.60.0.16

Online project queue
1. The Worker project queue will also check for designs submitted online to add to the processing queue. Added integration with Connect 2.0, upon request from the factory it is possible to send designs to Worker through the Send to Worker option on the Factory tab.  For more information, click here.

To check out more information about what's new in the Release Notes for Worker, clickhere.

 

 

07/04/2022 | Cut Pro |1.2.5.3

Project Import

1. You can now select the desired unit of measure for importing .CSV type projects, for more information click here. 

 

Labels
1. Implemented functionality where it is possible to select the option to order the leftover labels so that they are printed after the part labels corresponding to each plate. For more information click here. 

 

 

To check out more information about what's new in the Release Notes for Cut Pro, clickhere.

 

 

 

06/29/2022 | Connect |2.1.22

Design Details

1. Added a project preview in theProject Detailstab.

2. In the ProjectSituation, theFinishedoption was added.

3. In theStage, theProductionoption was added.

4. InSpace, the optionOtherswas added.

 

Filter Store's Designs

1. TheSave my filtersoption is available, in which, by checking this option, the preferences are saved locally, and in the next launches, the saved filters are automatically applied in the project listing. For more information clickhere.

 

 

To check out more information about what's new in the Release Notes for Connect, clickhere.

 

 

 

29/06/2022 | Promob|5.60.16.86

29/06/2022 | Catalog |5.60.1.49

Closet Builder

1. Added fields for custom messages in Cabinets, Items and Shelves in Cabinet Builder. For more information, click here, here and here.

2. Now in the Closet Builder, it is possible to register subgroups, creating a hierarchy of folders in the Catalog, being reflected in the Promob. For more information click here.

To check more information about the Catalog release, clickhere.

 

06/27/2022 | Cut Pro |1.2.5.2

1. Now the Cut Pro will no longer use tickets at the moment of activation, but will be activated with a serial number, just like Promob activation. For more information click here. 

 

To check out more information about what's new in the Release Notes for Cut Pro, clickhere.

 

 

 

06/20/2022 | Start | V.12 R.26 | Maker BR | V.1 R.25 | Design - Produce - Automate

 

Feature Configurator

1. Added a new option for customizing the code and description of screws for boxes and false fronts, through the Feature Configurator in parameters D and E, available in Feature Configurator – Hardware – Screws. (1689527)

2. Added a new parameter option to choose height insertion measure for 3, 4 and 5 hinged doors.

3. Added the option of External Sliding Doors to the Internal Sliding Door modules, from the Bedroom line. In this option, the available door is above the locks. In addition, the following parameters were also added for customization by the Feature Configurator:

• Top filler depth;
• Bottom filler depth;
• Height of the filler bar;
• Clearance between the outer side and the filler;
• Definition of the sides, whether they will have the depth of the module or the filling, individually for left and right;
• Definition of the top, whether it will have the depth of the closure or the depth of the module;

4. Added a new inline machining option for bottom and top panel, in the back cutouts and shelves of L-Corner, Oblique Corner and column modules, for all available lines in the library. (1742075)

Modulation

1. Added new top modules of Left and Right Blind Corner, in the Kitchen and Bedroom lines available in the Cabinet Builder. (1811093, 1811097, 1809053 and 1844631).

2. Added a Shoe Rack category in the Cabinet Builder Bedrom line. Closet Builder - Bedrooms - Drawers - Shoe Rack. (1811555)

To check out more information about what's new in the Release Notes for Start, clickhere.

To check out more information about what's new in the Release Notes for Maker BR, clickhere.

 

 

04/11/2022| Promob | 5.60.16.78

 

1. A message is now displayed when closing Promob while connect is saving a project. This avoids losing the project.

 

2. A message is now displayed during the generation of a budget, telling you which step is being processed for the process follow-up.

 

3. Created shortcut to 2020 Manager negotiation in the budget preview screen when the project has an active negotiation. For more information click here.

 

 

4. Now the name of the 3D Environment is the name of the registered project, for users with Connect 2.0.

 

To check more information about the Promob release, click here.

 

 

06/20/2022 | Connect |2.0.101

1. Made available the design visibility option, so you can define whether the design is public or private. For more information, clickhere.

To check out more information about what's new in the Release Notes for Connect, clickhere.

 

 

 

05/04/2022 | 2020 Manager | 4.5

Designs Received

1. Added filter option by person responsible for the design. For those responsible to be visible, click onUsers.(58983)

 

Home Screen Menus

1. Added option to dismiss all notifications at once. (64095)

 

05/03/2022 | Pomob Maker | Produce - Automate | 1.2.0.87

1. Available option to create fictitious names of Models. For more information, click here. 

 

04/20/2022 | 2020 Manager | 4.4

Menus

1. Created new interface for notifications menu. (61070)

 

04/11/2022| Promob | 5.60.16.78

1. Available in theHelp - Aboutmenu, a new form called Project Data, available to apply edits to the company's data, only for the open design. For more information clickhere.

To check more information about the Promob release, clickhere.

 

04/11/2022| Decore Online

1. Added 23 new items:

• Ball 02 in Commercial Spaces - Gym
• Ball 03 in Commercial Spaces - Gym
• Yoga Mat 01 in Commercial Spaces - Gym
• Bathtub 12 in Bathrooms - Bathtubs
• Suporte 05 em Banheiros - Acessórios
• Cup 21 in Kitchens - Utensils - Glassware
• Sink 10 in Kitchens - Sinks
• Sprinkler 01 in Decoration - Variables
• Mirror 09 in Decoration - Mirrors
• Mirror 10 in Decoration - Mirrors
• Mirror 11 in Decoration - Mirrors
• Built-in Microwave 03 in Kitchens - Home Appliances - Ovens
• Office Chair 18 in Offices - Chairs
• Broom 01 in Laundry - Accessories
• Kit 01 in Laundry - Accessories
• Vertical Linear Light in Luminaries- Lights
• Chair 72 in Furniture - Chairs
• Cabinet 01 in Furniture - Cabinets
• Column 10 in Obstacles - Columns
• Shelf 03 in Organizers - Storage
• Plant Vase 12 in Plants - Arrangements
• Plant Vase 13 in Plants - Arrangements
• Foliage 29 in Plants - Floor

To check out more information about what's new in the Release Notes for Decore, clickhere.

 

03/31/2022 | Catalog| 5.60.1.44

1. Available now, support for alphanumeric and numeric types (alphabetic and numeric characters) in Custom Fields. 

2. TheOnline Orderregistration option is available for the user to request the online purchase of the products included in the quote. For more information clickhere.

3. Enabled the optionAllow Optional Id from Connect, for display and identification in XM, of the selected design option when creatingmore than one design versionin Connect. For more information clickhere.

To check more information about the Catalog release, clickhere.

 

03/30/2022 | Promob | 5.60.16.77

1. In Automatic Documentation, the default value of theRange Dimensioning, is the value respective to the module with the greatest depth located parallel to the selected wall. When you open the Dynamic View in the Viewport in the Automatic Documentation, it will be in the position defined here in theRange Dimensioning. For more information clickhere.

2. Now in Automatic Documentation, the default value ofCut Heightis equal to the value of the greatest height between the wall(s) contained in the 3D environment. The maximum acceptable value in the field is the default value. For more information clickhere.

3.  Added the icon that directs to the Promob support page regardingprinting. 

 

4. The automatic dimensioning calculations are now more precise; when you hover the mouse near the center of the dimension, an orange square appears at the midpoint of the edge, so that you can add a new dimension with precision. For more information, clickhere.aqui.

5. In Wall Editor, added aCut Floorwhen Finished option inPreferences-Environment-Build Walls that when checked, causes the floor to be adjusted automatically in the wall editor. For more information clickhere.

6. Provided the optionCreate Default Floor, For situations where Automatic Floor Adjustmentis enabled, or it is necessary to make or redo  changes to the floor dimensions, you can use the Create Standard Floor tool. It disregards the created last floor and creates a floor with default dimensions, equal to those displayed in the new design (5000 x 5000 mm). For more information clickhere.

 

7. When you build walls in the Wall Editor, angular and linear dimensions are automatically displayed. For more information, clickhere.

To check more information about the Promob release, clickhere.

 

03/29/2022 | 2020 Manager | 4.3

Region
1. AddedFrench (France)language in registration options. It is now possible to add descriptions inFrench (France)for certain entries in the system. Previously only the Canadian French option was available. (61756)

 

Document viewer

1. Changed the PDF viewer in the system from the default (iframe) to thePDFViewer library. (61238)
2. By changing the default PDF viewer (61238), thePrintandDownloadbuttons on thePDFViewer libraryscreen were modified. (61239)

 

System alerts

1. Improvement made to standard error messageThis operation displayed to the user could not be performed when a specific message is not available for the exception. (48130)
2. Added the informationVersionin theHelp - Aboutmenu. (51450)

3. Changed the design of alerts(Toast).(61071)

 

Home

1. New header and side menu interface on home. (61068)

2. Created newUsermenu interface in header. (61069)

 

Home/Permissions/Profiles (60940)

1. Updated the menu icons on the left and Permissions.
2. Revision of permissions related to actions and access to menus.
3. Updated all routes/modules to reflect the new menu structure.

 

Onboarding

1. Reduced decimals from four to two in theCompany markupfield during the pricing step inOnboarding.(62388)

2. During theOnboardingprocess, in the Team stage, the members start to have the checkbox checked automatically. (62391)

 

Promob Integration

1. Removed thePrepare for shippingbutton in Promob. (61532)

2. Added the buttonsPrepare for DealandNegotiatein theBudgetmenu in Promob. (61533)

 

03/25/2022 | Builder |1.60.16.14

1. Adjusted plugin name forCNC MACHPRO ATC.

 

New Plugins

1. Machine PluginCMS - MAXIMA 24 MB. For more information clickhere. (1780268)

2. Machine PluginAlca Machine Router AL2030 ATC.

3. Machine PluginRouser Inspire 35 Router.

 

Full label

1. Changed theFull Labeloptions to a separate mode. (180494)

2. Added setting for bold label. (180494)

3. Added option to register values in millimeters or inches. (180494)

 

New attributess

1. Added Multimaterial attribute, for use on non-wooden parts. For more information click here.

 

03/23/2022 | Cut Pro |1.2.4.26

1. Added Unit of Measure setting in Cut Optimizers, to enable conversion to another unit of measure than the one set in Cut Pro during integration. For more information, click here. aqui.

 

2. Updated the behavior of manual part movement, it now follows the same Reference Point used in the cutting plan and registered in Preview. For more information click here.

 

To check out more information about what's new in the Release Notes for Cut Pro, clickhere.

 

 

 

03/02/2022| Decore Online 

1. Added 07 new items:

• Plant Vase 10 11 in Plants - Arrangements
• Pendant 41 in Luminaire - Pendants
• Backpack 03 in Clothing - Purses and Bags
• Basket 11 in Organizers - Boxes
• Hanger 06 in Organizers - Hangers
• Water Tap 07 in Kitchens - Taps and Faucets

 

02/21/2022 | Builder |1.60.16.12

Cutting plan
1.Order numberfield available when generating an order in Cut Pro.

For more information clickhere.

 

Technical drawing
1. Shortening drawing of aluminum profiles available.

For more information clickhere.

 

02/15/2022 | Connect |2.0.101

1. Improvement made available in which when importing a project and selectingCreate a new customer, it is possible to import the Client Data, if these were previously registered. For more information, clickhere.

 

 

To check out more information about what's new in the Release Notes for Connect, clickhere.

 

02/07/2022 | Promob | 5.60.16.69

1. Improvement made in which when clicking on an online module in the 3D space, its code is displayed in the lower bar of Promob.

2. Added option to import design in Promob Maker.

3. Added option that allows to import designs from 2020Design. Imported items are highlighted in red to identify the import, with the exception of door and window items that are imported directly from the Decore library. For more information clickhere.

To check more information about the Promob release, clickhere.

 

02/01/2022 | Cut Pro

 

1. Individual prioritization order configuration available in specific features of Cut Pro. For more information click here.

2. New functionality available that allows configuring a maximum number of characters in the text of Labels for Inmes Cut. For more information click here.

3. TheProject order numberinformation is available to be inserted in the Start/Builder CSV import configuration and in the Label Editor. This field displays the project order number, present in the CSV file, generated through the Connect tool. (1771516)

 

4. New Composition number field available in the module in the Label Editor to insert the corresponding part number in the module composition. For more information clickhere. (1274094)

 

 

To check out more information about what's new in the Release Notes for Cut Pro, clickhere.

 

01/20/2022 | Decore Online

1. Added 02 new items:

• Doorbell (4x2) in Installations- Light Switches
• Luminaire 20 in Lights - Sconces

To check out more information about what's new in the Release Notes for Decore, clickhere.

 

01/04/2022 | Connect |2.0.97

1. The opening of the previous version that was generated from the project is available in the Project Details History tab. For more information clickhere.

To check out more information about what's new in the Release Notes for Connect, clickhere.

 

 

12/03/2021 | Cut Pro | 1.2.4.23

1. Available the configuration of the value of the true/false fields in the cut optimizers. For more information click here.

To check out more information about what's new in the Release Notes for Cut Pro, clickhere.

 

 

12/02/2021 | Decore Online

1. Added 03 new items:

• Crockpot 01 in Electros - Small Appliances
• Coffee Machine 06 in Electros - Small Appliances
• Ladder 01 in Decor - Miscellaneous

To check out more information about what's new in the Release Notes for Decore, clickhere.

 

11/11/2021 | Decore Online

 

 

 

11/09/2021 | Builder |1.60.16.9

1. Configuration for generating images of the cutting optimizers has been made available, for more information clickhere.

 

To check out more information about what's new in the Release Notes for Builder, clickhere.

 

 

11/05/2021 | Promob | 5.60.16.62

1. When creating a wall through the Wall Editor it is possible to display the grid on the floor, this helps in the accuracy of the construction of the wall. Clickherefor more information.

2. It is possible to dimension the straight and angled walls in the Wall Editor and thus identify the size of the created wall. Clickherefor more information.

3. When building the wall from the Wall Editor, and selecting theFloor Limit Adjustment, the floor will automatically adjust to the exact size of the construction of the walls, with no floor leftovers. Clickherefor more information.

IMPORTANT:Only available for walls built by the Wall Editor.

 

 

10/20/2021 | Cut Pro | 1.2.4.22

1. The configuration of the face to be prioritized in the cutting plan, DXF, technical drawing and part image are available. For more information, click here.

To check out more information about what's new in the Release Notes for Cut Pro, clickhere.

 

 

10/13/2021 | Decore Online

1. Added 20 new openings: 

• Sliding Window 15 in Openings - Windows - Sliding 
• Sliding Window 16 in Openings - Windows - Sliding 
• Standard Window 19 in Openings - Windows - Standard
• Standard Window 20 in Openings - Windows - Standard
• Standard Window 21 in Openings - Windows - Standard
• Standard Window 22 in Openings - Windows - Standard
• Standard Window 23 in Openings - Windows - Standard
• Standard Window 24 in Openings - Windows - Standard
• Sliding Door 32 in Openings - Doors - Sliding
• Sliding Door 33 in Openings - Doors- Sliding
• Side Hung Door 49 in Openings - Doors- Side Hung
• Side Hung Door 50 in Openings - Doors- Side Hung
• Side Hung Door 51 in Openings - Doors- Side Hung
• Side Hung Door 52 in Openings - Doors- Side Hung
• Side Hung Door 53 in Openings - Doors- Side Hung
• Side Hung Door 54 in Openings - Doors- Side Hung
• Side Hung Door 55 in Openings - Doors- Side Hung
• Side Hung Door 56 in Openings - Doors- Side Hung
• Opening 02 in Openings - Doors - Frames
• Frame 10 in Openings - Doors - Frames

To check out more information about what's new in the Release Notes for Decore, clickhere.

 

 

 

 

10/06/2021 | Connect |2.0.83

1. Added theHistorytab in the Design Details, where uploaded projects with version creation date, person responsible and serial number are displayed. 

To check out more information about what's new in the Release Notes for Connect, clickhere.

 

 

10/04/2021 | Promob |5.60.16.55

1. Added theBuy Onlinefeature, where you can purchase items from partners through Promob. For more information, clickhere.  IMPORTANT: This feature is available for Promob Plus, Academic, and Student.

 

To check out more information about what's new in the Release Notes for Promob, clickhere.

 

09/30/2021 | Builder |1.60.16.8

1. It is now possible to define the type of encoding of characters in the Nesting file, in CNCs Settings. 

To check out more information about what's new in the Release Notes for Builder, clickhere.

 

 

 

09/30/2021 | Worker | 6.60.0.12

1. The folder chooser now uses the full Windows Explorer structure, so it is possible to select network paths.

To check out more information about what's new in the Release Notes for Worker, clickhere.

 

09/24/2021 | Decore Online

1. Added 14 new items: 

• Sconces 17 in Lights - Sconces
• Sconces 18 in Lights - Sconces
• Sconces 19 in Lights - Sconces
• Pendant 39 in Lights - Pendants
• Hangers 01 in Organizers - Hangers
• Guardrails 1-A in Obstacles - Guardrails
• Guardrails 1-B in Obstacles - Guardrails
• Guardrails 1-C in Obstacles - Guardrails
• Guardrails 2-A in Obstacles - Guardrails
• Guardrails 2-B in Obstacles - Guardrails
• Guardrails 2-C in Obstacles - Guardrails
• Guardrails 3-A in Obstacles - Guardrails
• Guardrails 3-B in Obstacles - Guardrails
• Guardrails 3-C in Obstacles - Guardrails

To check out more information about what's new in the Release Notes for Decore, clickhere.

 

 

 

09/21/2021 | Cut Pro | 1.2.4.21

1. Available the time of creation of the file in Cut Pro.

 

To check out more information about what's new in the Release Notes for Cut Pro, clickhere.

 

09/15/2021 | Decore Online

1. Added 12 new items:

• Air Conditioner 08 in Electros - Climate
• Air Conditioner 09 in Electros - Climate
• Air Conditioner 10 in Electros - Climate
• Shelf 06 in Organizers - Storage
• Shelf 07 in Organizers - Storage
• Shelf 08 in Organizers - Storage
• Shelf 09 in Organizers - Storage
• Pool Table 02 in Sport | Games - Games
• Pool Cue 02 in Sport | Games - Games
• Disinfectant 04 in Laundry - Cleaning
• Detergent 03 in Laundry - Cleaning
• Footwear 43 in Clothes - Footwear

To check out more information about what's new in the Release Notes for Decore, clickhere.

 

 

09/14/2021 | Promob | 5.60.16.50

1. Added AutoSave compatibility with Connect. The project is saved every 5 minutes, and the file remains in Local for 30 days.
IMPORTANT:Note that this is only a backup file, the original file remains saved in the cloud. 

To check out more information about what's new in the Release Notes for Promob, clickhere.

 

09/13/2021 | Maker |1.2.0.75

1. The association of  cover cap is now available, so when creating/editing a Model in Maker, on the Shape tab, it is possible to associate one of the registered cover cap codes. For more information, click here.  

To check out more information about what's new in the Release Notes for Maker, clickhere.

 

 

09/08/2021 | Catalog |5.60.1.38

1. Through theCustom Fieldsfunctionality you can register customer data fields and company data displayed in the ConnectDetailstab, or in Promob'sHelp-Aboutmenu. For more information, clickhere.

To check out more information about what's new in the Release Notes for Catalog, clickhere.

 

09/01/2021 | Decore Online

1. The group Computers has been moved to Electronics.
2. In the Electronics group, 7 new items were added:

• TV 50" 01 em Electronics- Televisions
• TV 65" 01 em Electronics- Televisions
• TV 84" 01 em Electronics- Televisions
• Monitor 04 em Electronics- Computers - Computer
• Monitor 01 em Electronics- Computers - Computer
• Modem 02 em Electronics- Computers - Computer
• Home Speaker 01 em Electronics - Sound

To check out more information about what's new in the Release Notes for Decore, clickhere.

 

08/25/2021 | Decore Online

1. The name of the group Tables | Chairs | Sideboards has been simplified to Furniture.
2. Decore received 16 new items:

• Chairs 64 to 71 in Furniture - Chairs.
• Tables 39 to 42 in Furniture - Dinning.
• Stool 17 in Furniture - Stool.
• Cosmetics 20 in Bathrooms - Cosmetics.
• Wall Clothesline 01 in Laundry - Laundry Accessories.
• Picture 29 in: Decor - Paintings - Miscellaneous.

To check out more information about what's new in the Release Notes for Decore, clickhere.

 

 

08/18/2021 | Builder | 1.60.16.7

1. Technical drawing of Aluminum Profiles sets available.

To check out more information about what's new in the Release Notes for Builder, clickhere.

 

08/18/2021 | Decore Online

1. Added corner couch 02 in the Upholstery group, under Contemporary.

To check out more information about what's new in the Release Notes for Decore, clickhere.

 

 

08/18/2021 | Start | V12 R1.2 | Maker BR  | V.1 R.9 

1. Improvement made that provides an option to configure the hardware for fixing the bottoms, forBottom w/ Base. (1772606)

To check out more information about what's new in the Release Notes for Start, clickhere.

To check out more information about what's new in the Release Notes for Maker BR, clickhere.

 

 

08/17/2021 | Cut Pro | 1.2.4.20

1. Added the integration plugin with the Schelling cutting manager - MCS Evolution.

To check out more information about what's new in the Release Notes for Cut Pro, clickhere.

 

08/16/2021 | Decore Online

1. The Chairs in Furniture group has received a Signature Design update, with 04 New Eames Chairs:
• Chair 60 (Eames Chair DKR Bikini);
• Chair 61 (Eames Chair DKR);
• Chair 62 (Eames Chair DSW);
• Chair 63 (Eames Chair DAW);

To check out more information about what's new in the Release Notes for Decore, clickhere.

 

 

08/09/2021 | Decore Online

1. Assign Materials to the outlet individually. (1785428)
2. Added a new Blind Spot Mirror, in the Electrical and Hydraulics Installations group. (1785428)
3. Added new outlets with Switches, in the Electrical and Hydraulics Installations group. (1785428)

To check out more information about what's new in the Release Notes for Decore, clickhere.

 

 

08/02/2021 | Decore Online

1. Included Drilling Machine and Screwdriver, in the group Tools in Garage.

To check out more information about what's new in the Release Notes for Decore, clickhere.

 

 

07/29/2021 | Decore Online

1. Included ten new couch in the Contemporary group, under Upholstery.

To check out more information about what's new in the Release Notes for Decore, clickhere.

 

 

07/28/2021 | Start|V12 R1.2

1. The created modules on the Bedrooms tab now have different minimum heights according to the number of drawers available in each module.

To check out more information about what's new in the Release Notes for Start, clickhere.

 

07/20/2021 | Cut Pro|1.2.4.19

1. Provided the option to not display the leftovers dimensions in the Cutting Plan View. 

2. For manually created schemas, now you can move a schema from one folder to another folder by dragging the mouse.

 

To check out more information about what's new in the Release Notes for Cut Pro, clickhere.

 

 

07/16/2021 | Maker|1.2.0.68

1. Added screen to manage Materials with registered models. Now you can activate/deactivate a material, edit an existing model, and create a new material model.  IMPORTANT: Available for Maker Produce and Maker Automate.

To check out more information about what's new in the Release Notes for Maker, clickhere.

 

 

07/15/2021 | Catalog|5.60.1.37

1. Added a new Template for creating listings, the Default Price. Through this template it is possible to generate .csv files.

2. Catalog integration with Mooble available, through two options: when selecting CIC – Deploy Production the Catalog connects to Mooble Production, and when selecting CIC – Deploy Test connects to Mooble Demo.

To check out more information about what's new in the Release Notes for Catalog, clickhere.

 

 

07/14/2021 | Builder|1.60.16.6

1. Provided improvement that makes it possible to replace shapes in modules. 

To check out more information about what's new in the Release Notes for Builder, clickhere.

 

 

07/09/2021 | Mooble

1. Mooble Inspire showroom platform made available. Through it, retailers publish the space designed as a showcase, enabling the user to customize or request a budget.

 

 

To check out more information about what's new in the Release Notes for Mooble, clickhere.

 

 

06/25/2021 | Builder | 1.60.16.4

1. Added option inGeneral Builder Settingsto automatically adjust the position of the part in the Technical Drawing, optimizing the viewing space.

To check out more information about what's new in the Release Notes for Builder, clickhere.

 

06/23/2021 | Real Scene 2.0 | 2.0.7

1. Linear light is diffused and no longer dotted, for all rendering qualities. And its intensity now has less influence on the color.

To check out more information about what's new in the Release Notes for Real Scene 2.0, clickhere.

 

06/11/2021 | Connect | 2.0.66

1. The project name will be displayed in the top bar title of Promob.

To check out more information about what's new in the Release Notes for Connect, clickhere.

 

06/09//2021 |  Builder | 1.60.16.3

1. Added the option to register operations with aggregates.

To check out more information about the Builder Release Notes, clickhere.

 

06/08/2021 | Mooble

1. Made available for Mooble Design, option to export projects to GLB format.

For more information about the Mooble Release Notes, clickhere.

 

06/02/2021 |Revisão de SistemadoPlus Professional, doPlus EnterpriseeAcademic | 21.08

1. New Provence door model made available for kitchens. (1737232)

For more information on the System Review Release Notes, clickhere.