Promob Plus - Release Notes - System Revision - Previous Versions Follow

    

 

IMPORTANT: 

• To view system reviews of Promob Plus and Arch, click here.

• To check recent versions 24.X and above, click here.

 

See below the latest news from Promob:

 

Revision 23.15

Date: 11/30/2023

• Partners

Library

1. Included the Dublin partner library. (2058274)

2. Included the Duoz Organizadores partner library. (1914142)

3. Updated module library of the Adipar partner. (1967474)

4. Updated module library of the Zen partner. (2007536)

5. Updated module library of the Masutti Copat partner.(2061578)

 

• Corrections

Closets Builder

1. Fixed the situation where the cabinet fronts overlapped when separated by a horizontal partition. (2061459)

 

Cut Pro

1. Corrected the issue where some models from the Eucatex partner were not receiving grain direction indication when sending the project to Cut Pro. (2062726)

 

Models

1. Fixed the situation where the Pitanga and Castanha de Caju models from the partner Placas do Brasil displayed colors different from their actual shading. (2063072)

 

 

Revision 23.14

Date: 11/08/2023

• Enhancements

1. Available a new option of spacer for kitchen structures, which can be used next to partitions in Spacer for Partition. (2049960)

 

1. Available option to change the thickness of built-in oven fronts in the feature configurator. (1385198)

 

2. Available the option to apply specific lateral clearance for corners L and Oblique corners separately. (1621801 and 1231326)

 

• Corrections

Library

1. Fixed the situation where the side of corner L was displayed inside the module. (2058501)

 

Models

1. Fixed the situation where, when applying the Berneck Model - Direction Line - Vertical - Opera (Micro) on swing doors, the internal part of the door was transparent. (2058129)

 

• Partners

Library

1. Updated library of materials from partner Placas do Brasil. (2058478)

2. Updated module library of partner Masutti Copat. (2052425)

3. Updated module library of partner Perfar. (2057428)

 

 

Revision 23.13

Date: 10/17/2023

• Enhancements

1. Changed the name of the Pantry tab to Tall Cabinets.

2. Two Slatted panel models have been created in the Living Room library, both with two different configuration options:

• Panel 01 - Configuration based on the size of the slats in relation to the size of the panel.

• Panel 02 - Configuration based on the size and number of friezes.

 

3. Improvements have been made to the Grooved panel, which now allows the thickness of its components to be configured, as well as the size of the gaps and their quantity. Two new panels have been created for this purpose:

• Grooved Panel 01 - Allows the configuration of the size of the grooves in relation to the size of the panel.

• Grooved Panel 02 - Allows the size and quantity of friezes to be configured.

 

1. Added a tab in the Feature Configurator located in Kitchens → Panels → Back Panel - Tall, to allow changes to the back panel settings of Pantry/Towers. (1974492)

 

• Corrections

Closet Builder

1. Fixed the situation where, when creating a built-front counter, adding a horizontal partition, adding a drawer above the partition and another drawer below, the message The Drawers Set item will be removed. Do you wish to proceed? was displayed. (2041337)

 

• Partners

Library

1. Update from partner Soldax available. (2048500)

 

 

Revision 23.12

Date: 10/02/2023

• Enhancements

1. Added a Coat Hanger tab in the internal options of the Upper structure of the Bedrooms line. (2042294)

 

• Corrections

Plugin Cut Pro

1. Fixed the situation where the partition and double side panel of the Office library were sent to the cut plan, and an inconsistency occurred in the display of the models. (2041337)

 

• Partners

Library

1. Included the DT Vidros partner library. (2042052)

2. Update from partner Perlare available. (2044097)

 

 

Revision 23.11

Date: 09/18/2023

• Enhancements

1. Change of contact in Sunlux partner order. (2039432)

 

• Corrections

1. Fixed the situation where, when sending the part to the cut plan, inconsistent information occurred and the material descriptions of the edge bands were not displayed correctly. (2036693)

 

Models

1. Corrected the situation in which, when applying the Floraplac > Colors > Fendi model, there was a divergence of color tone between the toe kick and counter top pieces in relation to the rest of the modulation. (2036622)

2. Corrected the situation in which, when applying the Guararapes > Brazilian Wood Line > Vertical > Freijó model to doors, not all the faces received the texture correctly. (2039560)

 

Materials

1. Corrected the situation in which the textures of the Granite > Black > Absolute Black and São Miguel materials were displayed inverted. (2035937)

Library

1. Corrected the situation in which a inconformity was displayed when adding the Tower module to the Cava Kitchens line. (2036683)

 

• Partners

Materials/Models

1. Update from partner Fibraplac available. (2037208)

 

 

Revision 23.10

Date: 08/28/2023

• Corrections

1. Corrected the situation in which the gap between the fronts was not being respected when using dividers between the drawers. (2030133)

 

• Partners

Library

1. Included the Wurth partner library. (1888850)

2. Update from partner Adipar available. (2031288)

3. Update from partner Greenplac available. (2029161)

 

 

Revision 23.09

Date: 08/15/2023

• Corrections

1. Fixed the situation where the Roble Catedral (Graan) model of the partner Berneck, was applying the gray color in the modulation items. (2026651)

 

Library

1. Corrected the situation where it was not allowed to apply copied material with the paintbrush on aluminum door profiles. (2028177)

 

• Partners

Library

1. Update from partner Invita available. (2024904)

2. Update from partner Elettromec available. (2028259)

3. Update from partner Falmec available. (2028259)

 

 

 

Revision 23.08

Date: 07/31/2023

• Enhancements

1. Available improvement in the Dimensions Configurator in which it is now possible to individually change the thickness of the Shelf w/ Slider through parameter E. (1994341)

 

 

• Corrections

 Plugin Cut Pro

1. Corrected the situation where the direction of the vein of the material Veredas of the partner Greenplac was not sent correctly to Cut. (2016504)

 

Library

1. Fixed the situation where the white Versátile Handle Bar of the Contatto partner was displayed in purple color. (2020033)

 

 

• Partners

Materials/Models

1. Update from partner Sudati available. (2017085)

2. Update from partner Guararapes available. (2021550)

 

 

 

Revision 23.07

Date: 07/12/2023

• Enhancements

 

• Corrections

Models

1. Corrected the situation in which the color of the Granile material of the Toccare Colore line of the Greenplac partner was displayed with a different color from the showcase. (1981622)

2. Corrected the situation in which, when using the Nogueira Pecan model of the partner Arauco, some parts of the plate were not correctly displaying the corresponding model. (2003284)

 

 

• Partners

Library

1. Realized the inclusion of the partner Sunlux. (2014593)

 

Materials/Models

1. Update from partner Duratex available. (2014392)

2. Update from partner Berneck available. (2013161)

3. Update from partner Arauco available. (2013161)

 

 

Revision 23.06

Date: 06/22/2023

• Enhancements

Revision 23.05

Date: 05/17/2023

• Enhancements

 

• Corrections

 

  

• Partners

Library

1. Updated the price list of the Zen partner. (1975485)

 

 

Revision 23.04

Date: 04/05/2023

• Corrections

Library

1. Fixed the situation of the Tramontina partner, where the geometry was not correctly drilled, when inserting items of Organizing Channels in the 3D environment. (1976592)

 

Closets Builder

1. Fixed situation in the Kitchen line of the Cabinet Builder where some movable partitions, available in the Wall Cabinets, were dividing the bottom of the cabinet. (1915820)

 

• Partners

Library

1. Updated the FGVTN partner library.  (1922052)

IMPORTANT: Updated almost the entire library, so it may be necessary to reinsert items from old projects and regroup items from the partner.

2. Updated the Elettromec partner library. (1976649)

3. Included the Invita partner library. (1976652)

 

 

Revision 23.03

Date: 03/14/2023

• Corrections

Closets Builder

1. Fixed situation where it was not possible to insert slide shelf in Closets Builder. (1964810)

 

• Partners

Library

1. Updated the Duratex partner library. (1936877)

 

 

Revision 23.02

Date: 02/15/2023

• Corrections

 

 

 

Revision 23.01

Date: 01/17/2023

• Corrections

 

• Partners

Library

1. Updated the Perlare partner library. (1948421)

 

 

Revision 22.20

Date: 11/28/2022

• Enhancements

 

• Corrections

Design
1. Fixed situation where a unconformity was displayed when opening projects. (1938422)

• Partners

Library

1. Updated the Greenplac partner library. (1936515)

2. Updated the Tecnovidro partner library. (1935084)

 

 

Revision 22.19 

Date: 11/16/2022 

• Corrections

Aggregates

1. Fixed the situation in the Bedroom line, where a nonconformity was displayed when removing the toe kick from theBlind Corner Cabinets. (1928934)

 

• Partners

Library

1. Updated the Cosentino partner library. (1931827)
2. Updated the Dekton partner library. (1931827)
3. Updated the LedLine partner library. (1934343)

 

Revision 22.18 

Date: 10/18/2022 

• Partners

Library

1. Updated the Duratex partner library. (1924287)
2. Updated the Guararapes partner library. (1924157)
3. Updated the Zen partner library. (1919678)

 

Revision 22.17 

Date: 09/22/2022 

• Enhancements

1. Realized changes in the standard values, of 6 mm bottom thickness. (1912900)

• Corrections

Modulation

1. Corrected the situation for swinging doors where the description of the hinges did not change when the model selection was with a damper. (1913650)
2. Corrected the situation where the retreat of the split base of the L corner of Bedrooms, was inconsistent. (1915980)

• Partners

Library

1. Updated the Tramontina partner library. (1912436)
2. Updated the Greenplac partner library. (1917149)

 

Revision 22.16

Date: 09/05/2022

• Corrections

Models 

1. Corrected the situation in the kitchen line, where changing the edge band to the Bali model, from the Essenziale line of partner Greenplac, also changed the model of the entire panel. (1909601)

2. Fixed the situation where the Berneck partner pattern Black (TX) was not displayed in the pattern option for edge band. (1910279)

• Partners

Library

1. Updated the Soldax partner library. (1909968) 

 

Revisão 22.15 

Date: 08/16/2022 

• Enhancements

Library

1. Available the option of gap and alignment of the sides and bases of the living room library. (1769105)

• Corrections

Plugin Cut Pro

1. Fixed the situation where Support dimensions were sent inverted to Cut Pro. (1902595)

• Partners

1. Fixed the situation where the Versatile handles of the Contatto partner, was not displayed in the print listing. (1902200)
2. Corrected the situation where the Ocre Solar pattern Velluto line, from partner Duratex, was not displayed from the external box model options. (1902599)

  

Revision 22.14 

Date: 27/07/2022 

• Corrections

Project

1. Fixed the situation where the built-in front collided with the base, in built-in kitchen drawers created from Closets Builder. (1892836) 

2. Fixed the situation where in which nonconformity was displayed when selecting the Obispa Integrated Handles model, for aluminum fronts. (1897432) 

Plugin Cut Pro

3. Fixed the situation where the door position (Right and Left) for flap doors was displayed, in Cut Pro. (1892227) 

• Enhancements

Project

1. Added option for a horizontal collar door for built-in countertops, in Bedroom. (1896876) 

• Partners

Library

1. Updated the Tecnovidro partner library. (1895909) 

2. Updated the Zen partner library. (1895908) 

 

Revision 22.13

Date: 07/13/2022

• Corrections

Translations
1. Fixed the situation where the translation was displayed repeated in the English language in Properties C and D of the Dimension Configurator in Dorms - Drawers - Amount - Amount 1. (1885125)

Models 

1. Corrected the situation where the vein of the Oasis model, from partner Duratex, was inserted inverted. (1889166)

2. Fixed the situation where the Níquel model, from the partner Guararapes, was displayed with different descriptions, in the budget, in the materials tab and when exporting to Cut Pro. (1889984)

Modulation

• Partners
  

Revision 22.12

Date: 06/21/2022

• Corrections

Translations
1. Adjusted the Spanish and English language translations in the Features Configurator. (1874064)

 

• Partners

1. Partner Sudati update available. (1881440)

2. Made adjustments in the Elettromec partner library (1882756)

 

 

 

Revision 22.11

Date: 06/08/2022

• Corrections

Translations
1. Adjusted the Spanish language translations in the Dimension Configurator (1874248)

 

• Partners

1. Included the partner Tecnovidro. (1880234)

2. Removed the Saint Claire partner from Promob's Modules tab (1880234)

3. Removed partner Casa Vitra from Promob's Modules tab. (1880234)

 

 

 

Revision 22.10

Date: 05/25/2022

• Corrections

1. Corrected the situation where the upper kitchen module was inserted without partitions.(1874348)

2. Fixed the Spanish and English translations in the Features Configurator (1872680, 1873759, 1874334)

 

• Partners

1. Elettromec partner update available. (1873288)

2. Eucatex partner's price list update available. (1876470)

3. Obispa partner update available. (1873274)

 

 

Revision 22.09

Date: 05/09/2022

• Enhancements

1. Aggregate option available for Shelves of the Bedroom library. (1869002)

• Corrections

Revision 22.08

Date: 04/19/2022

• Enhancements

1. The Front Without Drawer option is available on the Doors tab of the closets builder for kitchen base cabinets. (1795867)

 

• Corrections

• Partners

1. East Glass partner update available. (1862964)

2. Adipar partner's price list update available. (1847046)

3. Panizzi partner update available. (1865392)

 

 

Revision 22.07

Date: 04/04/2022

• Enhancements

1. Gap and alignment option available for sides and bottom/upper for Dressers modules in the Bedrooms - Cabinet Assembly - Dressers | Nightstands - Side Panel line. Form more information click here. (1851302)

2. Made improvement where the brand and dimension of the TV are now sent to XML in partner Lucap. (1836301)

 

• Corrections

• Partner

1. Obispa partner update available. (1852944)

2. Greenplac partner update available. (1852920)

3. Berneck partner update available. (1855370)

4. Guararapes partner update available. (1855496)

 

Revision 22.06

Date: 03/21/2022

• Corrections

• Partner

1. Zen partner update available. (1852026)

2. Sudati partner update available. (1851212)

 

 

Revision 22.05

Date: 03/07/2022

• Corrections

 

 

Revision 22.04

Date 02/24/2022

• Corrections

• Partner

 

Revision 22.03

Date 01/31/2022

• Corrections

1. Corrected situation where retreat indentation of toe kick baseboards was not applied. (1830554)

2. Corrected situation where thickened top of Office desks did not follow the measurement applied in the Dimension Configurator. (1833980)
3. Corrected situation where the depth of the middle handle of Cava Kitchens was not changed. (1830189)
4. Corrected situation where clearance of file drawer fronts was not applied correctly in Offices. (1834646)

 

• Enhancements
  

1. Made an improvement, in which, when selecting the handle of integrated doors with partner profile, the entire door is selected. (1829911)

 

• Partner
  

1. Replaced the Lino Platina material, from the partner Fibraplac. (1830650)

 

 

 

Revision 22.02

Date 01/17/2022

• Corrections

1. Corrected the situation where partial batten was not applied correctly to the blind corner of Kitchens. (1829556)
2. Corrected the situation where the lateral offset was not applied correctly at corners L. (1828521)
3. Corrected situation where Villagio partner items were not listed in the Budget with price editing.(1828626)
4. Fixed situation where Arauco partner materials were not sending vein direction information to Cut Pro. (1827763)
5. Fixed situation where two items from partner Lif Elementi displayed unconformity in the insertion. (1829142)
6. Corrected situation where the Manufacturing Process for the Lower Pit door was not calculated correctly when used in meter. (1829000)

 

• Partner

1. Update on the Zen partner library available. (1829247)

2. Update on the Adipar partner library available. (1825808)

 

Revision 22.01

Date 01/04/2022

• Corrections

1. Fixed situation where it was not possible to apply prices on the Alumiglass partner. (1822843)
2. Fixed situation where frames sent an additional shape to Cut Pro. (1820111)

• Partner

1. Included Cosentino partner library. (1820340)

 

 

Revision 21.18

Date 11/22/2021

• Corrections

1. Fixed situation where the Jequitibá Rosa model, from the Essencial Wood line by partner Duratex, was applied with the vein direction inverted in the outer box. (1818032)

• Partner

1. Update on the East Glass partner library available. (1814435)
2. Update on the Masutti Copat partner library available. (1814608)
3. Update on the Sudati partner library available. (1814545)
4. Update on the Fibraplac partner library available. (1814531)
5. Update on the Metal House partner library available. (1818738)

 

 

Revision 21.17

Date 11/16/2021

• Partner

1. Included Soldax partner library. (1810150)

2. Updated the Beige material in the Nuances line of the Arauco partner. (1810898)

3. Update on the Obispa partner library available. (1812699)

 

 

Revision 21.16

Date 10/25/2021

• Corrections

1. Fixed situation where the parameter referring to the type of shelf (Single x Split) of the Dimensions Configurator was not applied in the L corner modules of bedrooms. (1805145)

 

• Enhancements

1. Selection of individual parts in the thickening frame allowed. (1141884)

 

 

• Partner

1. Update on the Obispa partner library available. (1808192)

 

 

 

Revision 21.15

Date 10/04/2021

• Corrections

1. Corrected situation where it was not possible to edit the drawer dimension for Dorms countertop structures. (1792837)
2. Fixed situation where the two-color port was sent with incorrect information to Cut Pro. (1794048)
3. Fixed situation where the Pau-ferro model from Arauco partner was not applied to the edge band. (1795220)
4. Corrected situation where the Tauri and Marmo model, from the Guararapes partner, were not sent correctly to Cut Pro. (1797887)
5. Fixed situation where when inserting a kitchen tower and changing the parameters so that the base is on the side, the module was out of adjustment. (1801818)
6. Corrected a situation where the Nordic model from Arauco's Partner line generated a special plate in Cut Pro. (1803803)
7. Fixed situation where Arauco partner's Ebony model exhibited a different texture from the original pattern. (1804070)
8. Fixed situation where door and front clearances were incorrect when using vertical batten with kitchen builder frames for built-in doors. (1799955)

9. Corrected situation where an inconsistency was displayed when inserting the item Curv Dir, located in Bedrooms - Tops/Shelf - Tops. (1803270)

 

• Partner

1. Mcodes adjustment made for partner Eucatex. (1801601)

 

 

Revision 21.14

Date 08/25/2021

 

• Enhancements

1. Added Python option as an aggregate for side of the glass shelves. (1771059)

• Partner

1. Update on the Arauco partner library available. (1789220)

 

 

 

Revision 21.13

Date 07/27/2021

• Partner

1. Included Adipar partner library. (1779474)

 

 

Revision 21.12

Date 07/19/2021

• Partner

1. Included Metal House partner. (1777428)

2. Update on the Elettromac partner library available. (1776344)

3. Update on the Zen partner library available. (1776347)

 

• Corrections

1. Fixed situation where partner door models were not displayed for 1Gav/Basc module in Bathroom library.(1775890)
2. Fixed situation where vats were not sent correctly to the Cut Pro Plugin. (1779011)

 

 

Revision 21.11

Date 07/06/2021

• Partner

1. Update on the Duratex partner library available. (1773611)

 

 

Revision 21.10

• Corrections

1. Fixed situation where the overlay filler raw material was not sent correctly to Cut Pro. (1769217)

2. Corrected the situation where TN Slow Motion Hidden Runner and FGVTN Partner Slow Motion Telescopic Runner have the same reference. (1744721)

 

 

• Partner

1. Update on the Tramontina partner library available. (1770700)

2. Update on the Obispa partner library available. (1770816) IMPORTANT: Withdrawal from the line of several products and complete renewal of the Obispa partner, so it may be necessary to reinsert items from old projects.

 

Revision 21.09

• Corrections

1. Fixed situation where the right side of the top cabinets was not resized when applying clearance. (1765174)
2. Fixed situation in which the Cumaru model, from Arauco partner, was applied rotated on the external face. (1765206)

 

• Partner

1. Included East Glass partner. (1765180)
2. Update on the Tramontina partner library available. (1764450)

 

 

Revision 21.08

 

• Enhancements

1. New Provence door model made available for kitchens. (1737232)

 

2. Removed full-sided frames from the Cava Kitchen Closets Builder, as all frames can have full sides when the option is applied in the Features Configurator.

 

• Partner

1. Included Mimo DSN partner. (1762840)

 

• Corrections

1. Fixed situation where Guararapes partner's Bilbao model was sent to Cut Pro as Avelã. (1762833)

 

 

 

Revision 21.07

 

• Enhancements

1. Added new Colonial glass door model for upper cabinets.(1486114)

 

2. Added 3 new handle models, 1 point and 2 stems.

 

 

 

• Partner

1. Update on the Guararapes partner library available. (1759368)

 

• Corrections

1. Corrected situation where the L corner shelf displayed an opening in the drawing. (1755295)

2. Fixed situation where the direction of the Cava port was not displayed in the listing.(1756055)

3. Fixed situation where Zen partner handles displayed another color when rendering. (1755197)

4. Corrected situation where the model Cobalt Gray from partner Berneck and Fendi from partner Guararapes displayed a color different from the actual standard.(1757707)

5. Removed the partner Flexa from budgets with price editing because it has its own values.

 

 

 

Revision 21.06

• Partner

1. Included Muller partner. (1752790)

• Corrections

1. Corrected situation in which the model Aurora, from the partner Duratex, was not presented as an option for edge band. (1745656)

 

 

Revision 21.05

• Partner

1. Update on the Dimec partner library available.  (1736785)

• Corrections

1. Corrected a situation where the Towers for Electros structures were inserted without the sides. (1742044)
2. Corrected situation where different rails used the same reference. (1739961)

 

Revision 21.04

• Enhancements

1. An enhancement is available that makes it possible to apply gap and alignment to the sides of the Kitchen modules. For more information click here. (1703993, 1446031 e 1141929) 
2. Improvement made available that makes it possible to apply gap and alignment to the bases of the upper Bedroom modules. For more information, click here. (1502113)
3. Y end cap are now budgeted by pair quantity. (1725786)

• Partner

1. Update on the Greenplac partner library available.  (1732493)

• Corrections

1. Fixed situation where the thickness of the closing view was not sent correctly to the Cut Pro plugin. (1722566)
2. Fixed a situation where it was not possible to apply partner ports to the Pia 1Gav / Basc module. (1720879)
3. Fixed situation where the Versatille handle of the Contatto partner was not rendered in black when it was applied. (1732614)

 

 

Revision 21.03

• Partner

1. Included the Orange Bed partner. (1718819)

2. Update on the Berneck partner library available.  (1720885)

 

• Corrections

1. Corrected a situation where it was not possible to apply handles to the lower doors of Straight Glass 4 Sides, from the Kitchen library. (1716400)

2. Corrected the situation where door clearances were applied inverted in the Tulha de Bathrooms module. (1720699)

3. Fixed FGVTN partner item description. (1707618)

 

 

 

Revision 21.02

• Enhancements

1. An improvement was made in that the kits for sliding doors in bedrooms now have different coding for internal, external and built-in doors, and different values can be applied for each use. (1438656)

 

• Corrections

1. Fixed situation where the front panel of kitchens was displayed with the direction of the vein reversed. (1716563)

2. Fixed a situation where the spacer size was sent inverted to Cut Pro. (1714985)

 

 

 

Revision 21.01

• Partner

1. Update on the Perfar partner library available.  (1706893)

• Enhancements

1. Provided the option of using bases and split shelves in the L corners. For more information click here and here. (1431054 and 1207677)

• Corrections

1. Fixed a situation where the wooden sliding door in the bedroom was not calculated. (1711206)

2. Corrected the situation where inverted overhead doors were shown with the inverted design when used in the colonial model. (1570019)

 

 

 

Revision 20.20

• Partner

1. Update on the Eucatex partner library available.  (1701079)

2. Update on the Greenplac partner library available.  (1701652)

 

 

Revision 20.19

• Partner

1. Update on the FVGTN partner library available.  (1696388)

 

• Enhancements

1. Improvement made to limit the dimensions of the invisible runners. (1281503)

2. Improvement was made to the movement of the modules, so that it is possible to lean the modules against the front closing of straight corner modules.(1697826)

 

 

Revision 20.18

• Partner

1. Update on the Perfar partner library available.  (1688992)

2.Update on the Tramontina partner library available.  (1688665)

 

 

Revision 20.17

• Corrections

1. Fixed situation where the fronts for electricians used lateral thickness configuration instead of doors. (1685020)

 

• Partner

1. Update on the Led Line partner library available.  (1681318)

 

• Enhancements

1. Created option to configure height and depth of towers different from the pantry through the features configurator. (1510135)

 

2. Created a better visual presentation of the door opening. (1686974)

 

 

 

 

Revision 20.16

• Corrections

1. Corrected the situation where it was not possible to edit the price of LIF Elementi partner items. (1680094)

 

• Partner

1. Update on the Sulfer partner library available.  (1681318)

 

 

 

Revision 20.15

• Enhancements

1. Added option to define the manufacturing process to calculate per linear meter in the Cava and Profile Y doors. For more information click here.(1384271)

2. Added new coat hanger option with support.

3. Remodeled image that represents the configuration of type and base and top for kitchen corner modules. (1536888)

 

• Corrections

 1. Corrected the situation where the bottom feed on the side of the upper cabinets of the kitchen cabinet builder did not respect the applied value. (1678395)

2. Corrected the situation where some Tramontina vats generated the message "Oops - The function does not accept non-numeric floating point values" in the Cut Pro plugin. (1677012)

 

 

Revision 20.14

• Enhancements

1. Revitalization of the relief effect of standard material textures for Real Scene 2.0.
2. Inserted 54 new colors in the Standard Materials Library: 5 New Reds, 8 New Yellows, 10 New Oranges, 11 New Blues, 10 New Magentas and 10 New Greens.
3. Reorganized the Colors in the Materials library.

• Partner

1. Update on the  Led Line partner library available. (1667425)
2. Update on the Elettromec partner library available. (1667638)
3. Update on the  Tramontina partner library available. (1668747)
4. Update on the  Dekton and Silestone partner library available. (1669454) 

• Corrections

1. Fixed situation where it was not possible to edit the prices of the Altero partner. (1671384)

 

Revision 20.13

• Partner

 1. Update on the  Dekton and Silestone partner material  library available. (1661925)

• Corrections

 1. Corrected the situation where the MDF of the doors of the Rometal partner had the dimensions of height and thickness reversed. (1658899)

 

Revision 20.12

• Partner

1. Update on the  LIF partner library available. (1657015)
2. Update on the Elettromec partner library available. (1657103)
3. Update on the Florapac partner library available. (1659832)

• Corrections

1. Corrected situation where the double kitchen lid selection box was displayed incorrectly. (1657756)
2. Fixed a situation where it was not possible to edit the Rometal Partner prices. (1660714)

 

Revision 20.11

• Enhancements

1. New models of foot made available for tables in the Office library. (1442574)

2. Inserted the option to apply the clearance to the bases of the Dormitory cabinets. For more information, click here. (1501384)

3. The shelves and partitions (mobile and fixed) that make it possible to apply the rear setback are available in the Closets Builder. For more information, click here. (1441580, 1389472 e 1356915)

• Corrections

1. Corrected the situation in which when applying the Morado Castilla model of the partner Formica to the module, other material was displayed on the outside. (1656571)

 

Revision 20.10

• Partners

1. Update on the Sulfer partner library available. (1652117)

2. Update on the Portabille partner library available. (1654110)

 

• Corrections

1. Corrected situation where the direction of the vein was not sent correctly to the cut plane when using some finishes from the partner Berneck. (1651632)

 

 

Revision 20.09

• Partners

1. Including partner Reflexo Glass. (1648393)

2. Update on the Dimec partner library available. (1647862)

3. Update on the Tramontina partner library available.  (1647711)

4. Update on the Lopar partner library available. (1646337)

5. Update on the Zen Design partner library available. (1649967

6. Update on the Portabille partner library available. (1649886)

• Corrections

1. Corrected the situation where theLift up module of partners, in the bathroom library, opened to the side. (1650392)

 

• Enhancements

1. Added the option of MDF Ultra material in the Dimension Configurator for all plates. (1646519)

 

Revision 20.08

• Partners

1. Update on the Perfar partner library available. (1641997)

2. Update on the Zen partner library available. (1644847)

3. Update on the Brasil Post partner library available. (1531052)

4. Update on the Berneck partner library available. (1531052)

 

Revision 20.07

• Partners

1. Update on the Contatto partner library available. (1637465)

2. Update on the Rometal partner library available. (1636456)

• Enhancements

1. Added drawer option with Cava front in the internal drawers of Dormitories. (1469351)

 

Revision 20.06

• Partners

1. Update on the Arauco partner library available. (1635818)

2. Update on the Berneck partner library available. (1635818)

3. Update on the Sudati partner library available. (1635818)

 

• Corrections

 

1. Corrected the situation where the drawer fronts of the Y-profile model were described as Door in Plugin Cut Pro. (1629582)

2. Corrected the situation where the image representing the back in the internal drawers of bedrooms did not correspond with the application of the properties available in the Dimension Configurator. (1628692)

Revision 20.05

• Partners

1. Availability of the partner's library Placas do Brasil.

• Corrections

1. Corrected the situation in which the partitions did not respect the retreat of the bottom in a horizontal kitchen cellar. (1629057)

2. Corrected the situation where the rules were displayed in the English language even though Promob was in the Portuguese language.

 

Revision 20.04

• Partners

1. Update made available of the Gurarapes partner library . (1626170)

2. Update made available of the Duratex partner library. (1626709)

3. Update made available of the Panizzi partner library. (1625818) 

• Corrections:

 

1. Corrected the situation where, when changing the direction of the front batten to vertical, in the right straight corners of the Kitchen library, the spacer was moved and was superimposed on the side panel. (1626872)

2. Corrected the situation in which the Led Line partner's unit budget rule was not calculated correctly. (1621458)

 

Revision 20.03

• Partners

1. Update available of Perfar partner library.

 

Revision 20.02

• Enhancements

1. Improvement in the design of the Tandem Box drawers for greater precision when dimensioning.

• Corrections

1. Corrected the situation in which the variable Runners Clearance of the Tandem drawers of the Blum partner was not applied to the structures of the Closets Builder. (1590562)

• Partners

1. Removed the material library from the Placas do Brasil partner.

 

Revision 20.01

• Enhancements

1. Profile Y door model option available. For more information, click here.. (1457127, 1535166 and 1582163)

2. Available option to add front with drawer opening in the towel rack module, from the Kitchen library. (1596124)

3. Available option in which it is possible to add a mirror to Wood, Gola and Gola 2L sliding doors. (1571897)

4. Changed sliding door Cava handle from the Dormitory library. The handle is now vertical. (1522587)

5. Available option of 25 mm thickness for sliding internal door jamb in the Dormitory library. (1094074)

 

 

 

• Corrections

 

1. Corrected the situation in which the Metrópole model of the Design line, from Duratex partner, was not applied correctly. (1596981)

2. Corrected the situation where it was not possible to edit the 2P +gaps of the library of Rooms, with a width less than 1,200 mm. (1600581)

3. Corrected the situation in which the Ipê Amarelo model, by partner Arauco, was not applied to the internal part of the module. (1607802)

4. Corrected the situation in which the aluminum sliding doors of the Dormitory library were inserted with a turning opening. (1609700)

• Partners

1. Included the materials library, by the partner Placa do Brasil.

 

Revisão 19.15

• Enhancements

1. Added ventilation grille as the aggregate option for Cabinet Oven Combination of kitchen library. (1523710)

2. Added option to aggregate ovens and microwaves to Cava Cabinet Oven Combination of kitchen library.                        (1530004)

3. Available superior base for dormitory bench structures. (1491644)

 

• Corrections

1. Corrected the situation where slide racks were inserted offset. (1585482)

2. Corrected the wine cellar dimension of Brastemp partner. (1580595)

 

• Partners

1. Included Led Line partner library. (1594914)

2. Included Sulfer partner library. (1594111)

3. Included SAS Plastic partner library. (1591593)

4. Updated the Perfar partner library. (1590501)

 

Revision: 19.14

• Partners

1. Performed inclusion of partner Greenplac. (1586291)

 

Revision: 19.13

• Enhancements

1. The model's name is made available in the description of hinges, steel and stainless steel. (1580970)

• Corrections

1. Corrected the situation where side closure was applied incorrectly on the blind corners of benches in the Dormitory library. (1577951)

2. Corrected the situation where the dimensions was not applied to the cabinet oven an microwave combination  of box mount configurations in Cabinet Assembly-Pantries. (1578751)

3. Corrected the situation where the profile of the aluminum doors was inserted in blue. (1581420)

4. Corrected the situation where the reference code of end caps was applied with the same code of handles profiles in the bethroom library. (1576446)

• Partners

 

1. Available partner update Classe A Lareiras. (1581551)

2. Available partner update Masutti Copat. (1580474)

3. Available partner update Perfar. (1581833)

4. Corrected the situation when configuring panels in partner Duratex's Trama Branco Diamante model, generated a special plate with Branco Ártico model.  (1583581)

5. Corrected  the situation where texture of Duratex partner Rovere Sereno model was inserted incorrectly. (1574581)

6. Corrected  the situation where when applying the Guararapes partner's Vesuvius model only to the edge ribbons, the application was also made in the box of module. (1575249)

 

Revision 19.12

• Enhancements

1. Performed inclusion of partner Lucap.

2. Added front footer option to side closure aggregates. (1577328) 

3. Performed the application of Mcodes in partners of materials.

• Corrections

1. Corrected the situation where a clearance between the crosspiece and the shelf of the Corner L and Oblique Corner modules was displayed. (1567063)

2. Corrected the situation where rail arrows were displayed incorrectly. (1539424)

3. Corrected the situation where drawer fronts were inserted displaced when using the Blum partner drawer on cabinet builder modules. (1474046)

 

Revision 19.11

• Enhancements

1.  Added shelf for predefine modules of blind corner in Kitchens library. (1551253)

2. Included the translation of the Door Height Clearance feature in the Sliding Door assistant of Dormitory library. (1564054)

• Corrections

1. Corrected the situation where the sides of the upper blind corners of the kitchen library did not advance over the upper base. (1558865)

2. Corrected the situation where a unconformity was displayed when inserting shoe racks into the blind corner modules. (1562556)

3. Corrected the situation em quewhere the clothes rail was inserteddisplaced. (1562362)

4. Corrected the situation where the composite corner doors L did not respect the dimension clearances of feauter configuration. (1551580) 

5. Corrected the situation where the folding door did not apply the clearance of up doors. (1548912)

 

• Partners

1. Performed inclusion of partner DIMEC. (1567075)

2. Available partner update Tramontina. (1554639)

3. Available partner update Perfar. (1554365)

4. Available partner update Floraplac. (1554145)

5. Available partner update Lif Elementi. (1564005)

6. Available partner update Franke. (1565304)

7. Available partner update Braspan.