Check below, the settings of each configuration available in Features Configurator - Kitchen - Cabinet Assembly - Wall Cabinets. If necessary, see here how to apply the dimension settings.
|
Side Panel Attach - Bottom Panel Side Panel Attach - Upper Panel Bottom/ Upper Panel Attach -Back Panel |
Side Panel Attachment - Bottom
A - Base Panel advance over Side Panel: sets how much the base panel advances over each of the module's side panels.
B - Side Panel advance over the Base Panel: sets how much each Side Panel advances over the module's Base Panel.
Side Panel Attach - Upper Panel
Side Panel Attach - Upper Panel
A - Base Panel Advance over Side Panel: sets how much the top panel advances over each of the module's side panels.
B - Side Panel advance over the Base Panel: sets how much each side panel advances over the module's top panel.
Back Panel
Back Panel Type
A - Back Panel Type: defines the Back Panel Type to be used in the module.
Bottom Panel
B - Back Retreat: sets the displacement of the back panel on the module's depth. It applies to all types of back panel.
Support Cleats
C - Support Cleats: sets the use of 2 horizontal battens for upper modules and 3 horizontal battens for Pantries/Tall Oven Cabinet's.
D - Cleats Dimension: sets the dimension of the batten.
Side Panel
Gap and Alignment - Side Panel
A - Gap: sets the spacing of the side panel in relation to the front of the module, the bottoom of the module or both.
B - Alignment: defines wheter the side panel spacing will be in relation to the rear of the module, the front of the module or the center.
Bottom/Upper Panel Attach - Back Panel
Bottom/Upper Panel Attach - Back Panel
A - Back Panel advance over Base Panel: sets much the back panel advances over the base panel of the module.
B - Back Panel advance over Base Panel: sets how much the back panel advances over the base panel of the module.
Islands - Base Attach - Back Panel
A - Back Panel advance over Base Panel: sets how much the back panel advances over the base panel of the module.
B - Back Panel advance over Base Panel: sets how much the back panel advances over the base panel of the module.
C - Base Panel advance over the Back Panel: sets how much the base panel advances over the back panel.
Base Retreat
D - Bottom Base Retreat: sets how much the back panel advances over the base panel of the module.
E - Top Base Retreat: sets how much the back panel advances over the base panel of the module.
Back Panel Attach - Side Panel
Back Panel Attach - Side Panel
E - Back Panel advance in Side Panel: sets how much the back panel advance over each of the module's side panels.
Islands - Back Panel Attach - Side Panel
E - Back Panel advance in Side Panel: sets how much the back panel advance over each of the module's side panels.
F - Side Panel advance over the Back Panel: sets how much the back panel advance over each of the module's side panels.
Back Panel Attach - Partition
Back Panel Attach - Partition
A - Back panel advance over the Partition: sets how much the back panel advance over the fixed partition.
Partition
A - Partition Front Retreat: set the distance between the module and beginning of the partition. Changes the depth of the partition.
B - Moveble Partitions Rear Retreat: set the distance between the back pannel of the module and the end of the partition. Changes the depth of the partition.
C - Fixed Partitions Rear Retreat: set distance between the module limit end and the end of the partition. Changes the depth of the partition.
Spacer
D - Spacer Dimension: sets the spacer dimension.
Shelf
Shelf
A - Shelves Front Retreat: set the distance between the module and the beginning of the self. Changes the depth of the shelf.
B - Movable Shelves Rear Retreat: set the distance between the back panel of the module and the end of the shelf. Changes the depth of the shelf.
C - Fixed Shelves Rear Retreat: set the distance between the module limit end and the end of the shelf. Changes the depth of the shelf.
D - Gap: sets the lateral spacing between the module and the shelf. Changes the widht of the shelf.
90º | Oblique | Curved Corner
Cornes
Corner Type
A - Corner Type: sets the assembly type for the back panel on 90º corner, 45º corner and curved wall cabinets.
With Batten
B - Batten width: sets the width of all the batten on Blind and Oblique Corners.
C - Batten's depth: sets the depth of all battens on Blind and Oblique Corners.
D - Back Panel advance over Batten: defines the advance of the back panel over batten.
E - Base Type: sets if the bottom/upper is whole or cutted.
Doors
F - Door A Internal Space: sets the internal distance of the A door of the 90º corner with 2 doors for wardrobes.
G - Door B Internal Space: sets the internal distance of the B door of the 90º corner with 2 doors for wardrobes.
W/o Batten
H - Base Panel advance over Back Panel: defines the advance of the base over the back panel.
I - Back Panel advance over Base Panel: defines the advance of the Back Panel the Base.
J - Back Panel advance over the Back Panel: defines the advance Back Panel over the Back Panel.
45º Corner
K - Spacer Depth: sets the depth of the spacers of the 45º corners.
90º Corner
Components
A - Base Type: sets if the bottom/upper is single or splited.
B - Shelf Type: sets if the shelf is single or splited.
Wall Gap
90º | Oblique | Curved Corner - Wall Spacing
A - Lateral spacing: sets the spacing between the module and the lateral wall.
B - Rear Spacing: set the distance between the module and the back wall.
Blind Corners
Corners
Blind Corner Panel
A - Blind Corner Panel Type: defines the Blind Corner Panel type for the blind corner cabinet.
B - Blind Corner Panel advance over Upper Base Panel: defines how much the blind corner panel advances over the module's upper base panel.
C - Blind Corner Panel advance over Bottom Base Panel: defines how much the blind corner panel advances over the module's bottom base panel.
D - Blind Corner Panel advance over Side Panel: defines how much the blind corner panel advances on the side panel of the module.
E - Blind Corner Panel Retreat: sets the displacement of the blind corner panel on the module depth.
Spacer
F - Use the spacer: sets the use of the spacer.
G - Blind Panel advance over the Spacer: sets the advance of the blind panel over the spacer.
H - Spacer advance on blind panel: sets the advance of the space over the module's blind panel.
I - Spacer advance on shelf: sets the spacer advance ont he module's shelf.
Shelf
J - Shelf Retreat: sets the distance between the module and the beginning of the self on wall blind corners. Changes the depth of the shelf. Determines the depth of the spacer used for the hinges attach.
Doors
K - Door advance over Blind Corner Panel / Partial Blind Corner Panel: sets the spacer advance on the module's shelf.
Fillers
A - Filler Type: sets the module's filler orientation.
B - Frontal filler Spacing | Partial Double Blind Panel Dimension: sets the spacing for the frontal filler in relation to the whole blind panel or the partial double-blind panel dimension.
C - Frontal Filler Dimension: sets the dimension of the module filler.
D - Upper Filler: inserts the superior filler on Blind Cabinets.
E - Inferior Filler: inserts the inferior filler on Blind Cabinets.
F - Back Filler: inserts the back filler on Blind Cabinets.
Wall Gap
Blind Corner - Wall Spacing
A - Lateral spacing: sets the spacing between the module and the lateral wall.
B - Rear Spacing: set the distance between the module and the back wall.
