Check below, the definitions of each configuration available in Dimensions Configurator - Bedrooms - Box Assembly - Countertops | Bedside Tables. If necessary, see how to apply dimension settings here.
|
Cleats/Upper Panel Attach - Side Panel |
|
Cabinet Assembly - Dressers | Nightstands
Side Panel
Side Panel Type
A - Side Panel: The Auto option adjusts the side panel to the limit of the floor. The Fixed option advances the side panel according to the value set on Side Panel advance over Base Panel.
- Auto
- Fixed
Side Panel Attach - Bottom Panel
B - Base Panel advance over Side Panel: Sets how much the base panel advances over each of the module's side panels. It applies to both types of side panel. Fixed and Automatic.
C - Fixed Side Panel advance over the Base Panel: When used the Fixed Side Panel type, sets how much each side panel advances over the base panel of the module.
Gap and Alignment - Bottom/Upper Panel
D - Gap: Sets the spacing of the side panel in relation to the front of the module, the bottom of the module or both.
E - Alignment: Defines whether the side panel spacing will be in relation to the rear of the module, the front of the module or the center.
Gap and Alignment - Bottom/Upper Panel
F - Upper/Bottom Panel Gap: Defines whether the upper panel spacing will be in relation to the rear of the module, the front of the module or the center.
G - Bottom Panel Alignment: Defines whether the base distance will be in relation to the back of the module, front of the module or through the center.
Side Panel
H - Side panel's downgrade: Sets the downgrade of the side panel.
Cleats
Cleats Type
A - Cleats Type: Defines the type of batten to be used in the module. It can be: Front only inserts the batten in the front. Rear only inserts the batten in the back. Both inserts the Front and Rear. And Whole inserts a single whole batten.
Cleats Dimension
B - Depth of the Front Cleats: Sets the depth of the front Cleats. The depth is applied when configured the batten type as Frontal or Both.
C - Depth of the Back Cleats: Determines the depth of the back Cleats. Applies when configured the Batten Type to Back or Both.
Cleats Direction
D - Front Cleats direction: Defines the direction of the front Cleats in the module. Applies when configured the rails support type as Front or Both.
E - Back Cleats direction: Defines the direction of the rear Cleats in the module. Applies when configured the Cleats Type as Back or Both.
Front Retreat
F - Frontal Cleats retreat: Sets the depth of the front Cleats. The depth is applied when configured the batten type as Frontal or Both.
45° Corner
G _ Cleats Shape: Sets the shape of the front Cleats used in 45° corner.
Cleats/Upper Panel Attach - Side Panel
Bottom/Upper Panel Attach - Side Panel
A - Top base advance in Side Panel: Sets how much the base panel advances over each of the module's side panels.
Side Panel Attachment - Cleat
B - Cleats advance over the Side Panel: Sets how much the front and back Cleats advances over each of the module's side panel.
Cleats/Upper Panel Attach - Back Panel
Cleats Attach - Fitted Back Panel
A - Cleats/Upper Base advance over the Back panel: Sets how much the back Cleats advances over the module's back panel.
B - Back Panel advance over the Cleats/Upper Base: Sets how much the back panel advances over the module's back Cleats.
Back Panel
Back Panel
A - Back Retreat: Defines the module's back panel displacement.
B - Back Panel advance over Base Panel: Sets how much the back panel advances over each of the module's base panel.
C - Back Panel advance in Side Panel: Sets how much the back panel advance over each of the module's side panels.
Back Panel Attach - Partition
D - Back panel advance over the Partition: Sets how much the back panel advances over each of the module's fixed partitions.
Kick Plate
Kick Plate Type
A - Kick Plate: The Auto option adjusts the kick plate to the limit of the floor. The Fixed option inserts the kick plate according to the value set on Kick Plate height.
- Auto
- Fixed
Kick Plate
B - Front kick plate retreat: Determines the retreat of the front kick plate.
C - Rear kick plate retreat: Determines the retreat of the rear kick plate.
Fixed kick plate
D - Fixed kick plate height: Determines the height of the fixed kick plate.
90° | Oblique | Curved Corner
Corners
Corner Type
A - Corner Type: Defines the assembly type for the back panel on 90° or 45° corner cabinet.
With Batten
B - Batten Width: Sets the width of all the batten on Blind and Oblique Corners.
C - Batten's depth: Sets the depth of all the batten on Blind and Oblique Corners.
D - Back Panel advance over Batten: defines the advance of the base panel on the batten.
Doors
E - Door A Internal Space: Sets the internal distance of the A door of the 90° corner with 2 doors for cabinets.
F - Door B Internal Space: Sets the internal distance of the A door of the 90° corner with 2 doors for cabinets.
W/o batten
G - Base Panel advance over Back Panel: Sets how much the base panel advance over the back panel.
H - Back Panel advance over the Base Panel: Sets how much the back panel advance over the base panel.
I - Back Panel advance over the back Panel: Sets how much the back panel advance over the back panel.
45° Corner
J - Spacer Depth: Sets the depth of the spacers of the 45° corners.
90°
Components
A - Base Type: Sets if the bottom/upper is single or splited.
B - Shelf type: Sets if the shelf is single or splited.
Wall Gap
90° | Oblique | Curved Corner - Wall spacing
A - Lateral spacing: Sets the spacing between the module and the lateral wall.
B - Rear spacing: Set the distance between the module and the back wall.
Blind Corner
Corners
Blind Corner Panel
A - Blind Corner Panel Type: Defines the Blind Corner Panel type for the blind corner cabinet.
B - Blind Corner Panel advance over the Base Panel: Defines how much the blind color panel advances on the module base.
C - Blind Corner Panel advance over Cleats Panel: Defines how much the blind color panel advances on the Cleats.
D - Blind Corner Panel advance over Side Panel: Defines how much the blind corner panel advances on the side panel of the module.
E - Blind Corner Panel Retreat: Sets the displacement of the blind corner panel on the module depth.
Spacer
F - Use the Spacer: Sets the use of the spacer.
G - Spacer advance on blind panel: Sets the advance of the space over the module's blind panel.
H - Blind Panel advance over the Spacer: Sets the advance of the blind panel over the spacer.
I - Spacer advance on shelf: Sets the spacer advance on the module's shelf.
Shelf
J - Shelf Retreat: Sets the distance between the module and the beginning of the shelf on blind corners. Changes the depth of the shelf. Determines the depth of the spacer used for hinges attach.
Doors
K - Door advance over Blind Corner Panel Partial Blind Corner Panel: Sets the spacer advance on the module's shelf.
Fillers
A - Filler Type: Sets the module's filler orientation.
B - Frontal filler Spacing | Partial Double Blind Panel Dimension: Sets the spacing for the frontal filler in relation to the whole blind panel of the partial double blind panel dimension.
C - Frontal Filler Dimension: Sets the dimension of the module filler.
D - Upper filler: Inserts the superior filler on Blind Cabinets.
E - Inferior filler: Inserts the inferior filler on Blind Cabinets.
F - Back filler: Inserts the back filler on Blind Cabinets.
Cleats
A - Frontal Cleats Type: Sets the frontal Cleats type in the blind corner. Partial goes until the Spacer and Total from side to side.
Wall Gap
Blind corner - Wall spacing
A - Lateral spacing: Sets the spacing between the module and the lateral wall.
B - Rear spacing: Set the distance between the module and the back wall.