IMPORTANT: The releases are made gradually, so it is possible that your Builder plugin is not in the latest version. To check changes from previous versions click here.
Check out the latest Builder news below:
1.38.0.22
- Released Plugins:
Plugin Builder : 1.38.0.22
- Corrections:
1. Fixed the situation where when generating images for the labels, the message The current user does not have permission to access the Label: Unauthorized service was improperly displayed. (1788930)
1.38.0.21
- Released Plugins:
Plugin Builder : 1.38.0.21
- Corrections:
1. Corrected the unconformity that was displayed when integrating with ERP and when generating technical drawing. (1608887)
2. Corrected the situation in which the registered contact machining was generated in nearby parts, even when there was no contact between faces. (1607547)
1.38.0.20
- Released Plugins:
Plugin BHX055 : 1.38.0.5
Plugin Builder : 1.38.0.20
Plugin Spazio3D : 1.38.0.6
- Corrections:
1. Corrected the situation that the machine BHX055 incorrectly generates as machinings for profile handles. The situation occurred, because, the machine performed the operations below the minimum limit allowed on the Y axis. (1602779)
2. Corrected the situation in which when integrating with Spazio 3D, the direction of the plates vein was reversed. (1611158)
1.38.0.19
- Released Plugins:
Plugin Biesse EKO 902 : 1.38.0.6
Plugin Builder : 1.38.0.19
Plugin Builder Budget : 1.38.0.7
Plugin Builder Catalog : 1.38.0.9
Plugin GPlan : 1.38.0.5
- Enhancements:
1. Drill serialization available for Json.
- Corrections:
1. Corrected the situation where the BHX055 machine did not generate panel arc machining. (1607359)
2. Corrected the unconformities that were displayed when generating documents for Tamburatos, through the Builder plugin in Start Labs. (1583330 e 1600905)
3. Corrected the situation where, when using zero point in the upper right position, the drilling was inverted in a specific shape. The situation occurred when using plugin EKO 902 in version 1.60.4.3 (1599218)
4. Corrected the situation where, in the Builder tab, when pressing the mouse scroll, new machining was added to the shape. (1605621)
5. Corrected the situation where Promob Studio requested the same update incorrectly and thus, did not finish the update process. (1608739)
6. Corrected the situation in which when generating the * .csv file referring to Gplan, the number of decimal places was greater than the number of configured places. (1603036)
7. Corrected the situation where the tool codes for PGM programs were incorrect.
1.38.0.18
- Released Plugins:
Plugin Accord 40 FX : 1.38.0.6
Plugin Ardis Cutting Optimizer : 1.38.0.3
Plugin Author200 : 1.38.0.6
Plugin Author327 : 1.38.0.6
Plugin Author436S : 1.38.0.6
Plugin Author500 : 1.38.0.6
Plugin AuthorM600 : 1.38.0.6
Plugin BHX050 : 1.38.0.4
Plugin BHX055 : 1.38.0.4
Plugin BHX500 : 1.38.0.4
Plugin Biesse EKO 902 : 1.38.0.5
Plugin Biesse FTT : 1.38.0.3
Plugin Biesse Rover 24 : 1.38.0.4
Plugin Biesse Rover A4 : 1.38.0.4
Plugin Biesse Rover B7 : 1.38.0.4
Plugin Biesse Skill 300 K3 : 1.38.0.4
Plugin BMG110 - Venture 113-114-115 : 1.38.0.4
Plugin Builder : 1.38.0.18
Plugin Builder Budget : 1.38.0.6
Plugin Builder Catalog : 1.38.0.8
Plugin Builder View : 1.38.0.2
Plugin Builder Xml : 1.38.0.4
Plugin Buselatto Jet Optima A20-C20-C21 : 1.38.0.3
Plugin C-Express 920 : 1.38.0.3
Plugin Corte Certo : 1.38.0.5
Plugin CRS Exata Vertical 1000 : 1.38.0.3
Plugin CRS Exata Vertical 1200 : 1.38.0.3
Plugin Cut Planning : 1.38.0.3
Plugin Cut Pro : 1.38.0.10
Plugin Cut Rite : 1.38.0.3
Plugin Cyflex 900 : 1.38.0.6
Plugin Cyflex 900BR : 1.38.0.6
Plugin Cyflex H800 : 1.38.0.3
Plugin Cyflex HP - CX200 : 1.38.0.3
Plugin Cyflex S e SR : 1.38.0.5
Plugin de Relatório de Perfil : 1.38.0.2
Plugin Dynestic 7516 : 1.38.0.3
Plugin Easy Jet : 1.38.0.5
Plugin Easynest 3018 A : 1.38.0.3
Plugin Easynest 3021 : 1.38.0.3
Plugin Easynest 4021 : 1.38.0.3
Plugin Evolution 7405 : 1.38.0.4
Plugin Exata Horizontal : 1.38.0.3
Plugin F9L : 1.38.0.3
Plugin Felder Creator 950 : 1.38.0.3
Plugin Flexdrill 1000 : 1.38.0.8
Plugin Format4 Profit H08 : 1.38.0.3
Plugin Format4 Profit H20-H22-H22L : 1.38.0.3
Plugin Giben Flat (BDT - Spectra) : 1.38.0.3
Plugin Giben Flat (Selexx - Professional Line - Stratos) : 1.38.0.3
Plugin Giben Genesis EVO : 1.38.0.3
Plugin GPlan : 1.38.0.4
Plugin Hirzt F10 : 1.38.0.3
Plugin Hirzt F6 : 1.38.0.3
Plugin Hirzt F8 : 1.38.0.3
Plugin Holzher Evolution 7401-7402 : 1.38.0.5
Plugin Holzher Master : 1.38.0.3
Plugin IF-850 Plus : 1.38.0.6
Plugin IF-8500 : 1.38.0.6
Plugin Integrador WPS - ERP : 1.38.0.3
Plugin Integração ERP Padrão : 1.38.0.5
Plugin Integração Focco : 1.38.0.3
Plugin Integração Promob ERP : 1.38.0.7
Plugin Integração Promob ERP Start : 1.38.0.8
Plugin Lepton Optimizer : 1.38.0.3
Plugin M400F : 1.38.0.5
Plugin Masterwood Nesting MW : 1.38.0.3
Plugin Morbidelli M100 : 1.38.0.3
Plugin OptiPlanning : 1.38.0.3
Plugin Otimizador de Corte Holzher HHOS : 1.38.0.3
Plugin Ottimo-Perfect Cut : 1.38.0.3
Plugin Point 2 : 1.38.0.6
Plugin Pratika 310 : 1.38.0.6
Plugin Pratika 315 : 1.38.0.5
Plugin Pratika 320 : 1.38.0.6
Plugin Pratika 325 : 1.38.0.6
Plugin PratixS : 1.38.0.6
Plugin Project 250 : 1.38.0.3
Plugin Project 450 : 1.38.0.3
Plugin Project TF : 1.38.0.3
Plugin PTP : 1.38.0.3
Plugin PTP 160 : 1.38.0.3
Plugin Relatorio para Separação de Almoxarifado : 1.38.0.2
Plugin Relatório de Aplicação de Lâmina por Módulo : 1.38.0.2
Plugin Relatório de Bordas : 1.38.0.2
Plugin Relatório de Fabricação por Componente : 1.38.0.2
Plugin Relatório de Fabricação por Módulo : 1.38.0.2
Plugin Relatório de Itens Montados : 1.38.0.2
Plugin Relatório de Montagem Steel : 1.38.0.2
Plugin Relatório de Tamburatos : 1.38.0.2
Plugin Relatório para Compra de Materiais : 1.38.0.2
Plugin Rover A 1332 : 1.38.0.4
Plugin Rover A 3.30 : 1.38.0.4
Plugin Rover C9 : 1.38.0.4
Plugin Rover1836GFT : 1.38.0.4
Plugin Rover20 : 1.38.0.4
Plugin Rover2231GFT : 1.38.0.4
Plugin Skipper 100 : 1.38.0.4
Plugin Skipper 130 : 1.38.0.4
Plugin Skipper V31 : 1.38.0.4
Plugin Spazio3D : 1.38.0.5
Plugin Startech : 1.38.0.3
Plugin Tech 99L : 1.38.0.3
Plugin Tech Z1 : 1.38.0.6
Plugin Tech Z2 : 1.38.0.6
Plugin Tech Z25 : 1.38.0.6
Plugin Tech Z30 : 1.38.0.6
Plugin Tech Z5 : 1.38.0.6
Plugin Twister750NX : 1.38.0.3
Plugin Uniflex : 1.38.0.6
Plugin Universal NB-3618 : 1.38.0.6
Plugin Universal NB-3622 : 1.38.0.6
Plugin Universal TV 3615 : 1.38.0.6
Plugin Vantage 24-25-26 series - Nesting : 1.38.0.4
Plugin Venture 107 : 1.38.0.4
Plugin Venture 108 : 1.38.0.4
Plugin Venture 1M : 1.38.0.4
Plugin Venture 22L : 1.38.0.4
Plugin Venture 2M : 1.38.0.4
Plugin Venture 316 : 1.38.0.4
Plugin Venture 3M : 1.38.0.4
Plugin Venture 8M : 1.38.0.4
Plugin Vetor Opus : 1.38.0.3
Plugin Vitap Point K2 : 1.38.0.3
Plugin Weeke BHC280 : 1.38.0.4
Plugin Weeke Optimat BHC250 : 1.38.0.3
Plugin WIBJ5 : 1.38.0.4
Plugin WPS Optimizer : 1.38.0.3
- Corrections:
1. Corrected the situation where there was a difference between the Cut Pro shopping list and the Promob budget listing. In the Cut Pro shopping list, not all project items were displayed. (1594263 and 1594314)
2. Corrected the situation where machining larger than 800mm was generated with one pass on machine BHX055. (1598479)
3. Corrected the situation where machining was generated with incorrect commands on the machine BHX055 and Venture 1M. (1599888)
4. Corrected the situation where the technical drawing image was not updated on the other pages of the listing according to the description and quantity of the items. (1601002)
5. Corrected the situation when configuring Universal Plugin NB 3618 the Label field was not displayed for configuration. (1601742)
6. Corrected the situation in which were missing parts in Plugin Rover 1836 GFT nesting generation. (1601034)
7. Corrected the situation where the exploded budget amount was different between version 5.60 and 5.38. The situation was due to the absence of OP Drill operation. (1601787)
1.38.0.17
- Released Plugins:
Plugin Builder : 1.38.0.17
Plugin Builder Catalog : 1.38.0.7
Plugin Cyflex S e SR : 1.38.0.4
Plugin Flexdrill 1000 : 1.38.0.7
Plugin Holzher Evolution 7401-7402 : 1.38.0.4
Plugin Point 2 : 1.38.0.5
- Corrections:
1. Corrected the unconformity that was displayed when generating files when there were kit screws. (1594935)
2. Corrected the situation where the zero point option of the Vitap Point 2 machine was reversed. For this, an option was available to invert the zero point. (1594313)
3. Corrected the situation where labels did not respect the font size and visibility settings of each dimension. (1591409)
4. Corrected the unconformity that was displayed when generating files, when using a specific module. (1594563)
5. Corrected the unconformity that was displayed when enabling the option to hide structures. (1596923)
6. Corrected the unconformity that was displayed when generating files when there wasn't a contour tool
selected in Setup. (1597071)
7. Corrected the situation where machining was on top of each other when using Weeke machines. (1597566)
8. Corrected the situation where no zero value attribute was generated in the ERP integration XML file. (1594775)
9. Corrected the situation where the machining perimeter was not correctly calculated using the $ PERIMETERMACHININIGLINETOTAL assembler $. (1596132)
10. Corrected the situation when using FlexDrill 1000 plug-in, the position of the pin drill was incorrect. (1576867)
11. Corrected the situation where the thickened top unnecessarily generated programs A and B when cutting plane was generated. (1598757)
12. Corrected the unconformity that was displayed when generating integration in the budgets stage. (1593803)
13. Corrected the situation where hinge drilling was not appearing in the manufacturing roadmap. (1598257)
14. Corrected the situation where the backups of the slots were not done correctly during the conversion process. (1598636)
1.38.0.16
- Released Plugins:
Plugin Biesse EKO 902: 1.38.0.4
Plugin Builder: 1.38.0.16
- Enhancements:
1. Changed save format of slot and edges standart operations files to JSON.
- Corrections:
1. Corrected the situation where slot files were dynamic rather than static after changing save format. (1596423)
2. Corrected the situation where slot were mirrored on parts when using Plugin Biesse Works. For this a new field was made available to select the mechanical zero point of the machine Biesse EKO 902. (1586410)
1.38.0.15
- Released Plugins:
Plugin Builder : 1.38.0.15
- Enhancements :
1. Changed save format of slot files in library to JSON.
- Corrections:
1. Corrected the situation where when generating the manufacturing report by module, the technical drawings were displayed incorrectly.
2. Corrected the situation where parts were duplicated when generating programs through the Spazio 3D Plugin. (1590146)
3. Corrected the message that was displayed when generating programs for Weeke BHX055 machine. (1590154)
4. Corrected the unconformity that was displayed when generating programs when wall ends Measure A was 0. (1590777)
5. Corrected the unconformity that was displayed in the Promob opening while loading library borders.
1.38.0.14
- Released Plugins:
Plugin Accord 40 FX: 1.38.0.5
Plugin Accord 40 FX: 1.38.0.5
Plugin Ardis Cutting Optimizer: 1.38.0.2
Plugin Author200: 1.38.0.5
Plugin Author327: 1.38.0.5
Plugin Author436S: 1.38.0.5
Plugin Author500: 1.38.0.5
Plugin AuthorM600: 1.38.0.5
Plugin BHX050: 1.38.0.3
Plugin BHX055: 1.38.0.3
Plugin BHX500: 1.38.0.3
Plugin Biesse EKO 902: 1.38.0.3
Plugin Biesse FTT: 1.38.0.2
Plugin Biesse Rover 24: 1.38.0.3
Plugin Biesse Rover A4: 1.38.0.3
Plugin Biesse Rover B7: 1.38.0.3
Plugin Biesse Skill 300 K3: 1.38.0.3
Plugin BMG110 - Venture 113-114-115: 1.38.0.3
Plugin Builder: 1.38.0.14
Plugin Builder Budget: 1.38.0.5
Plugin Builder Catalog: 1.38.0.6
Plugin Builder Xml: 1.38.0.3
Plugin Buselatto Jet Optima A20-C20-C21: 1.38.0.2
Plugin C-Express 920: 1.38.0.2
Plugin Corte Certo: 1.38.0.4
Plugin CRS Exata Vertical 1000: 1.38.0.2
Plugin CRS Exata Vertical 1200: 1.38.0.2
Plugin Cut Planning: 1.38.0.2
Plugin Cut Pro: 1.38.0.9
Plugin Cut Rite: 1.38.0.2
Plugin Cyflex 900: 1.38.0.5
Plugin Cyflex 900BR: 1.38.0.5
Plugin Cyflex H800: 1.38.0.2
Plugin Cyflex HP - CX200: 1.38.0.2
Plugin Cyflex S e SR: 1.38.0.3
Plugin Dynestic 7516: 1.38.0.2
Plugin Easy Jet: 1.38.0.4
Plugin Easynest 3018 A: 1.38.0.2
Plugin Easynest 3021: 1.38.0.2
Plugin Easynest 4021: 1.38.0.2
Plugin Evolution 7405: 1.38.0.3
Plugin Exata Horizontal: 1.38.0.2
Plugin F9L: 1.38.0.2
Plugin Felder Creator 950: 1.38.0.2
Plugin Flexdrill 1000: 1.38.0.6
Plugin Format4 Profit H08: 1.38.0.2
Plugin Format4 Profit H20-H22-H22L: 1.38.0.2
Plugin Giben Flat (BDT - Spectra): 1.38.0.2
Plugin Giben Flat (Selexx - Professional Line - Stratos): 1.38.0.2
Plugin Giben Genesis EVO: 1.38.0.2
Plugin GPlan: 1.38.0.3
Plugin Hirzt F10: 1.38.0.2
Plugin Hirzt F6: 1.38.0.2
Plugin Hirzt F8: 1.38.0.2
Plugin Holzher Evolution 7401-7402: 1.38.0.3
Plugin Holzher Master: 1.38.0.2
Plugin IF-850 Plus: 1.38.0.5
Plugin IF-8500: 1.38.0.5
Plugin Integrador WPS - ERP: 1.38.0.2
Plugin Integração ERP Padrão: 1.38.0.4
Plugin Integração Focco: 1.38.0.2
Plugin Integração Promob ERP: 1.38.0.6
Plugin Integração Promob ERP Start: 1.38.0.7
Plugin Lepton Optimizer: 1.38.0.2
Plugin M400F: 1.38.0.4
Plugin Masterwood Nesting MW: 1.38.0.2
Plugin Morbidelli M100: 1.38.0.2
Plugin OptiPlanning: 1.38.0.2
Plugin Otimizador de Corte Holzher HHOS: 1.38.0.2
Plugin Ottimo-Perfect Cut: 1.38.0.2
Plugin Point 2: 1.38.0.4
Plugin Pratika 310: 1.38.0.5
Plugin Pratika 315: 1.38.0.4
Plugin Pratika 320: 1.38.0.5
Plugin Pratika 325: 1.38.0.5
Plugin PratixS: 1.38.0.5
Plugin Project 250: 1.38.0.2
Plugin Project 450: 1.38.0.2
Plugin Project TF: 1.38.0.2
Plugin PTP: 1.38.0.2
Plugin PTP 160: 1.38.0.2
Plugin Rover A 1332: 1.38.0.3
Plugin Rover A 3.30: 1.38.0.3
Plugin Rover C9: 1.38.0.3
Plugin Rover1836GFT : 1.38.0.3
Plugin Rover20: 1.38.0.3
Plugin Rover2231GFT: 1.38.0.3
Plugin Skipper 100: 1.38.0.3
Plugin Skipper 130: 1.38.0.3
Plugin Skipper V31: 1.38.0.3
Plugin Spazio3D: 1.38.0.4
Plugin Startech: 1.38.0.2
Plugin Tech 99L: 1.38.0.2
Plugin Tech Z1: 1.38.0.5
Plugin Tech Z2: 1.38.0.5
Plugin Tech Z25: 1.38.0.5
Plugin Tech Z30: 1.38.0.5
Plugin Tech Z5: 1.38.0.5
Plugin Twister750NX: 1.38.0.2
Plugin Uniflex: 1.38.0.5
Plugin Universal NB-3618: 1.38.0.5
Plugin Universal NB-3622: 1.38.0.5
Plugin Universal TV 3615: 1.38.0.5
Plugin Vantage 24-25-26 series - Nesting: 1.38.0.3
Plugin Venture 107: 1.38.0.3
Plugin Venture 108: 1.38.0.3
Plugin Venture 1M: 1.38.0.3
Plugin Venture 22L: 1.38.0.3
Plugin Venture 2M: 1.38.0.3
Plugin Venture 316: 1.38.0.3
Plugin Venture 3M: 1.38.0.3
Plugin Venture 8M: 1.38.0.3
Plugin Vetor Opus: 1.38.0.2
Plugin Vitap Point K2: 1.38.0.2
Plugin Weeke BHC280: 1.38.0.3
Plugin Weeke Optimat BHC250: 1.38.0.2
Plugin WIBJ5: 1.38.0.3
Plugin WPS Optimizer: 1.38.0.2
- Corrections:
1. Corrected the situation where when doing the integration through the Project TF plugin, the slots maded trhough milling, generated just inputs as Ramp and outputs as straight. (1563117)
2. Corrected the situation where a description of the plate dimension was incorrect in the technical drawing. (1583584)(1583584)
3. Corrected the situation where the EKO 902 machine program operations were mirrored. Field was provided to choose zero point of operations.
4. Corrected the situation where parts were not generated for cutting when positioned over one another. (1587206) (1587206)
5. Corrected the unconformity that was displayed when generating integration with Promob ERP. (1587892)
6. Corrected the unconformity that was displayed when generating module manufacturing report when there were lower modules for kitchen library appliances and cabinet oven combination. (1586799)
7. Corrected the situation where the database attributes in the item row were not displayed in XML. Example: product_type. (1588320)
8. Corrected the unconformity that was displayed when generating Startech machine program. (1589271).
9. Corrected the situation where changes made to the Features Configurator were not displayed in the warehouse report. (1588636)
10. Corrected the message that was displayed when generating program of drawer fronts or doors with 45º handle. (1588513)
11. Corrected the situation where curved edges added in part were not saved when reloading entity. (1585460)
1.38.0.13
- Released Plugins:
Plugin Builder: 1.38.0.13
Plugin Spazio3D: 1.38.0.3
- Corrections:
1. Corrected the situation where programs generated by the Spazio 3D Pxf machine had incorrect milling cutter. (1586449)
1.38.0.12
- Released Plugins:
Plugin Builder: 1.38.0.12
Plugin Builder Catalog: 1.38.0.5
- Enhancements:
1. Available improvement in the border register. For more informations click here.
- Corrections:
1. Corrected the situation where the label image extension was incorrectly referenced in the Nesting file. (1585451)
2. Corrected the situation where large projects were not generated when integrating with Cut Planning. (1582907)
3. Corrected the unconformity that was displayed when generating documentation when there were curved and compound borders in the project. (1586155)
1.38.0.11
- Released Plugins:
Plugin BHX050: 1.38.0.2
Plugin BHX055: 1.38.0.2
Plugin BHX500: 1.38.0.2
Plugin BMG110 - Venture 113-114-115: 1.38.0.2
Plugin Builder: 1.38.0.11
Plugin Cut Pro: 1.38.0.8
Plugin Vantage 24-25-26 series - Nesting: 1.38.0.2
Plugin Venture 107: 1.38.0.2
Plugin Venture 108: 1.38.0.2
Plugin Venture 1M: 1.38.0.2
Plugin Venture 22L: 1.38.0.2
Plugin Venture 2M: 1.38.0.2
Plugin Venture 316: 1.38.0.2
Plugin Venture 3M: 1.38.0.2
Plugin Venture 8M: 1.38.0.2
Plugin Weeke BHC280: 1.38.0.2
- Corrections:
1. Corrected the situation where the discount of borders was incorrect on the pieces. (1579694)
2. Corrected the unconformity that was displayed when optimizing with the Plugin Cut Pro. (1580600)
3. Corrected the situation where the border tapes were not exported to Cut Pro.
4. Corrected the situation where the CSV file exported by Plugin Cut Pro had an additional column separator at the end of each line. (1581629)
5. Corrected the situation where it was not possible to edit the thickness of the saws on Homag-Weeke machines. (1582374)
- Enhancements:
1. Changed the format of borders files to JSON.
1.38.0.10
- Released Plugins:
Builder Plugin: 1.38.0.10
Builder Budget Plugin: 1.38.0.4
Cut Pro Plugin: 1.38.0.7
GPlan Plugin: 1.38.0.2
Promob ERP Integration Plugin: 1.38.0.5
Promob ERP Start Integration Plugin: 1.38.0.6
- Corrections:
1. Corrected the situation where hardware when not aggregate to module was not sent to Cut Pro. (1573616)
2. Corrected the situation where the ERP Plugin requested incorrectly the same update and didn't complete the upgrade process. (1574605)
3. Corrected the situation where on Gplan export, parts that did not use the Program2 and Program3 columns were named with the _ symbol, from now on they will be empty nomenclature. (1575114)
4. Corrected the situation where not all items in Manufacturing Report by module were displayed. (1575983)
5. Corrected the situation where not all tamburate items were displayed in the Tamburate Report. (1576838)
6. Corrected the situation where in the Builder tab it was not possible to deselect an alignment face in the registration of the piece. (1578907)
7. Corrected the situation where the field for changing Maestro tools directory was not displayed in the machine configuration. (1578749)
8. Corrected the situation where XML displayed decimal measures in generated integration. (1573384)