Promob Plus - Release Notes - System Revision

Date: 04/29/2025

• Enhancements

Partners

1. Updated the partner Led Line. (2202925)

2. Updated the partner Adipar. (2197524)

3. Updated the partner Franke. (2192647)

4. Added the partner Tabone. (2150271)

5. Updated the partner Scheer Barbecue Grills and Accessories. (2177202)

6. Updated the partner Duratex with the inclusion of new finishes. (2207986)

New patterns available:

• Noble Woods – Design Line: Absolute Moss and Absolute Pearl

• Noble Woods – Thera Line: Imperial Freijo and Bourbon Walnut

• Metallics – Sense Line: Zinc

7. Updated the Price Table of the partner Adipar. (2211432)

• Corrections

Partners

1. Adjusted the registration of the material Roble Catedral to avoid inconsistencies during its use. (2215344)

Modulation

1. Adjusted the behavior in straight corners with closure configured as front, ensuring that the upper and lower closures correctly consider the dimensions when resizing the width of the module. (2220616)

2. Improved the visual behavior of the maritime door, now, the last slat is resized according to the size of the door. (2220872)

3. Fixed the behavior of the back stretcher of the straight corners of the Kitchens line, in the Lower tab, so that they correctly respect the setting of advance on the background. (2220591)

Date: 03/18/2025

• Enhancements

Partners

1. Updated finishes for partner Alpam. (2205050)

2. Updated finishes for partner Estitech. (2202447)

3. Added partner Artetílica. (2206437)

4. Updated partner Floraplac with the addition of the line Amazon Subtleties, which features the following finishes: Camapu, Guaraná Oak, Freijo Tucumã, Açaí Nut and Pink Mango. (2192639)

5. Updated partner Criativa Handles. Five new handles were added, namely: Carousel, Cube, Eclipse, Ornato and Quadrum. (2208069)

6. Updated the Price Table for partner Portábille. (2161206)

7. Updated the Price Table for partner Soldax Industrial Equipment. (2132085)

• Corrections

Partners

1. Corrected the finishes Oak Bahur and Off White Suave for partner Duratex. (2202108 and 2192128)

Closets Builder

1. Corrected the situation where the external sliding doors had incorrect side dimensions and the internal items were misconfigured when editing. (2198005)

Budget

1. Corrected the situation where, when inserting items from partner Ezdoor, there was incorrect accounting in the budget. (2208023)

2. Corrected the situation where the module 4G, Drawer from the Kitchens line, was generating budgets without a price. (2198735)

Date: 02/18/2025

• Enhancements

Partners

1. The partner Italyline Puxadores has been included. (2197636)

2. The partner Pigmento Laqueados has been included. (2198031)

Date: 01/28/2025

• Enhancements

Partners

1. The partner Criativa Handles has been included. (2193964)

2. The partner Scheer Barbecue Grills has been added. (2196561)

3. The partner Eucatex finishes were updated, with the inclusion of 14 new options as follows: (2195818) 

• MDF Eucafibra BP-BP Matt Soft: Pink Petal.

• MDF Eucafibra BP-BP Poro SuperMatt: Natural Almond, Tropical Oak,  Native Cumaru, Itaparica, Laurel Brazilian-Walnut, Grey Madero, Madero Cocoa, Nevada, Terracota Walnut.

• MDF LACCA AD: Urban Grey, Supreme Grey, Sea Green, Natural Cocoa.

4. Updated configurations for the Baru finish, available in the Combine Fácil range from the Berneck finishes partner. (2192787)

• Corrections

Budget

1. Corrected the situation in which, when generating a summary budget of items from the partner DIMEC, there was a divergence in the structure of the budget in relation to the assembled and exploded budgets. (2192719)

Closets Builder

1. Corrected a situation in which the dimensions of the back rail recess, defined in the Feature Configurator, were not applied to modules created in the Closet Builder. (2191177)

2. Corrected a situation in which the drawers in the Closets Builder incorrectly used drawer aggregates, disregarding specific drawer configurations. (2194208)

Update

1. Fixed the situation where, when updating the library version, some files were encrypted improperly, resulting in inconformities when opening new and existing designs. (2192024)

Date: 01/07/2025

• Enhancements

Partners

1. The update of the partner Duratex. (2153320 and 2172929)

2. The update of the partner Torralba. (2172392 and 2183843)

3. The update of the partner Led Line. (2184725)

Modulation

1. Added the option of rear indent for the shelves in the library modules. The change of indentations can be made through the Feature Configurator in: Line - Box Assembly - Shelf. (2113506)

• Corrections

Budget

1. Corrected the situation in the budget where plates with white finish LSF from partner Berneck generated, unduly, an extra value of special plate. (2171019)

Partners

1. Fixed situation where when performing the exchange of the edge tape model in the boxes with finishes from partner Floraplac, the module plates finishes were incorrectly changed. (2143779)

2. Made adjustment in the image of the Freijó Puro finish from the Duratex partner, which showed incorrect coloring when generating a rendering. (2174625)

3. Reorganized the alphabetical order of the finishes available in Berneck's Combine Fácil line. (2144802)

Update

1. Corrected the situation in which, after carrying out the update made available in the Update, when opening Promob, non-conformities were generated related to the item TEST FUND BY FUNCAI.entity. (2192024)

Date: 11/26/2024

• Enhancements

Partners

1. The update of the partner Dimec. (2175311)

2. The update of the partner Torralba. (2172392)

3. The inclusion of the partner Carpenter's Empire has been completed. (2170137)

IMPORTANT: The partner's budget must be created through the order. To do this, access the directory: Budget - Order - Carpenter's Empire. The partner's items are not displayed in the conventional budget.

• Corrections

Modulation

1. Fixed the description of the items located in the Accessories tab - Bedrooms - Pt Corner, as listed below:

• From Top External to Bottom External
• From Bottom External 02 to Top External 02
• From Bottom External to Top External

2. Fixed the issue where the dimensions of the Metal House partner's sheets did not align with the partner's production guidelines. (2173397)

3. Fixed the issue where the base setback configuration was not considered in the L-shaped corner modules in the Kitchen Line. (2179207)

Budget

1. Fixed the issue where a message about items without a price was incorrectly displayed when generating a quote. (2169892)

Date: 10/22/2024

• Enhancements

Partners

1. The update of the partner Metal House. (2166434)

• Corrections

Closets Builder

1. Fixed the situation in which changing the heights of drawer modules was not enabled in the Kitchens and Kitchens - Built-in Doors tabs of the Closet Builder. (2161080)

Date: 09/17/2024

• Enhancements

Modulation

1. Disponibilizada opção de gavetas internas em módulos Inferiores e Altos da linha de Cozinhas do Construtor de Armários. Alteração de folgas das gavetas e demais configurações dos montantes realizadas através do Configurador de Dimensões em: Cozinhas - Gavetas - Gavetas Internas/Montantes. (2069970)

Partners

1. Realizada a inclusão do parceiro de Portas de Alumínio Green Design. (2154783)

2. Realizada a atualização do parceiro Elettromec. (2155180)

Itens novos:

• Lava-louças Inox 10 Serviços 220V - LL-10S-45-SR-2VSA + FR-LL-45-XX-NCLA;
• Lava-louças Inox 14 Serviços 220V - LL-14S-60-SR-2VSA + FR-LL-60-XX-NCLB;
• Lava-louças Vetro 14 Serviços 220V - LL-14S-60-SR-2VSA + FR-LL-60-VT-NLGB;
• Gaveta Storage para Acessórios de Vinho Sole 14cm 220 V (GV-6S-14-SL-NTNA);
• Coifa Adria Ilha Vetro 90cm Connect 220 V (CFI-ADR-90-VT-2ATA);
• Coifa Adria Parede Vetro 90cm Connect 220 V (CFP-ADR-90-VT-2ATA);
• Gaveta Refrigerada 105 LITROS BUILT-IN 220 V (GR-BI-105-XX-2VIA);
• Gaveta Freezer 105 LITROS BUILT-IN 220 V (GF-BI-105-XX-2VIA);
• Cooktop Revestir 90cm 127 V (CKG-5Q-90-SR-1TLA);
• Cooktop Revestir 120cm 127 V (CKG-4Q-120-SR-1TLA).

Itens substituídos:

• Inox duo 398L (RF-DU-370-XX-2HSA) por Refrigerador Inox Duo 404 Litros 220 V (RF-DU-404-XX-2VSA);
• Freezer Inox Duo 300L (FZ-DU-274-XX-2HSA) por Freezer Inox Duo 307 Litros 220 V (FZ-DU-307-XX-2VSA);
• Mobile Embutir 90cm (CFI-MOB-90-VP-2ATB) por Coifa Ilha Mobile Connect (CFI-MOB-90-VP-2ATC);
• Sollevare 90 cm (CFD-SOL-90-XV-2ATB) por Coifa Sollevare Downdraft Conect (CFD-SOL-90-XV-2ATC);
• Sospesa Ilha 110cm (CFI-SOS-110-XX-2ATC) por Coifa Ilha Sospesa Connect 110 cm (CFI-SOS-110-XX-2ATD);
• Vetro Ilha 90cm (CFI-VTR-90-VP-2ATB) por Coifa Ilha Vetro Connect (CFI-VTR-90-VP-2ATC);
• Vetro parede 90 cm (CFP-VTR-90-VP-2ATB) por Coifa Parede Vetro Connect (CFP-VTR-90-VP-2ATC);
• Adria Ilha 90 cm (CFI-ADR-90-XX-2ATA) por Coifa Ilha Adria Connect (CFI-ADR-90-XX-2ATB);
• Adria Parede 90 cm (CFP-ADR-90-XX-2ATA) por Coifa Parede Adria Connect (CFP-ADR-90-XX-2ATB).

Itens retirados:

• Adega 77 Garrafas Dual Zone 220v (CV-2FS-77-XV-2ATA);
• Adega 34 Garrafas 127V (CV-1FS-34-XV-1ATA).

3. Realizada a atualização do parceiro Invita. (2155180)

4. Realizada a inclusão do parceiro VON ORT. (2157119)

5. Realizada a atualização do parceiro Adipar. (2157956)

• Inclusão de Fita Led COB (3000K e 4000K);
• Alteração de precificação de Tubos Avulsos da Linha Serralheria (de Unidade para Metro Linear);
• Atualização de logomarca.

6. Realizada a atualização do parceiro Alpam. (2159775)

• Realizadas alterações nos seguintes puxadores: AL.PUX.5012A, AL.PUX.5015 e AL.PUX.5019B.

7. Realizada a atualização do parceiro Perfar. (2159498)

• Alteração das dimensões de Gavetas e Gavetões Classic;
• Alteração da largura dos Painéis da Linha Verano;
• Inclusão da Porta Vidro para Paneleiros;
• Inclusão da Porta Vidro sem Travessas em Dormitórios;
• Inclusão de Vidros: Incolor Temperado, Reflecta Bronze, Reflecta Fume, espelho prata na linha Classic;
• Inclusão do Acabamento Naturalle para Frentes Cava;
• Inclusão do acabamento Avelã;
• Inclusão das Lâminas Cinza Catedral e Cinza Linheiro;
• Exclusão do Acabamento Perola;
• Alteração de Espessuras das peças que utilizam a lâmina Natural;
• Alterações das referências para ERP.

• Corrections

Modulation
1. Corrigida a situação onde, na aba de Modelos, apenas o tampo Reto ficava disponível para as opções de tampos na aba Tampos/Prateleiras, não respeitando as opções disponíveis. (2154446, 2143443).

2. Corrigida a situação em que ao alterar o parâmetro para recuar o fundo, a frente da gaveta do Porta-Latas não era inserida. (2159392)

Closets Builder

1. Corrigida a situação em que os sarrafos frontais e traseiros do módulo Inferior c/ Divisórias do Construtor de Armários da linha de Cozinhas apresentavam as travessas posicionadas para fora do módulo no ambiente 3D. (2149861)

Cutting Plan

1. Corrigida a situação em que as divisórias de módulos de Escritórios eram enviadas ao plano de corte com a espessura incorreta. (2151932)

Date: 08/06/2024

• Enhancements

Modulation

1. Disponibilizadas novas opções de portas no modelo Cava. Esses modelos permitem configurar a posição e as dimensões dos puxadores Cava através do Configurador de Dimensões, de acordo com sua respectiva linha em: Frentes | Portas - Frentes | Portas - Puxadores Cava.

Partners

1. Realizada a atualização do parceiro Berneck. A partir de agora, o parceiro é organizado conforme as linhas: Amadeirados Claros, Amadeirados Médios, Amadeirados Escuros, Metalizados, Combine Fácil (com três sub-linhas: Unicolores, Fantasia e Tecidos) e a Linha Smart.

Também, foram incluídos 9 acabamentos, sendo eles:

• Parquet Grann – Linha Amadeirados Claros
• Veneer Grann – Linha Amadeirados Médios
• Plomo Alumi, Gold Alumi e Dust Alumi - Linha Metalizados
• Latte Micro, Tangará Micro e Tabasco Micro – Linha Combine Fácil Unicolores
• Falésia Vel – Linha Combine Fácil Fantasia.

Além disso, também foram retirados de linha os acabamentos abaixo:

• Dote LSF e Frame LSF da linha Play;
• Compensato GRANN da linha Grann;
• Carvalho Atena, Carvalho Nice, Frassino Whiskey, Maple, Wengue Ravenna e Wengue Valência, da linha Poro;
• London da linha Tatto e Preto Design, Branco Super white MATT, Ceramik MATT, Chumbo MATT, Millenial MATT da linha Trend Colors.

2. Realizada a atualização da tabela de preços do parceiro Adipar. (2140551 e 2104724)

3. Realizada a atualização da tabela de preços do parceiro Soldax. (2104724 e 2140551)

4. Corrigida a situação em que alguns modelos de acabamento do parceiro Guararapes não eram disponibilizados corretamente nos módulos. (2147988)

• Corrections

Library
1. Corrigida a situação em que os fundos dos módulos da linha de Dormitórios, disponíveis na Biblioteca e no Construtor de Armários, não eram redimensionados corretamente. (2147932)

Partners

1. Corrigida a situação em que os puxadores do parceiro Torralba não eram posicionados corretamente quando adicionados em portas e frentes. (2136400)

2. Corrigida a situação em que alguns acabamentos do parceiro Arauco não eram inseridos corretamente no ambiente. (2140615)

3. Corrigida a situação em que alguns acabamentos do parceiro Guararapes não eram inseridos corretamente no ambiente. (2126699)

Update

1. Corrigida a situação em que o sistema se encontrava em looping de atualização. (2144325)

Date: 02/07/2024

• Enhancements

Images
1. Updated the images of all modules in the Library and Wardrobe Builder so that they all follow the same standard.

Partners

1. Added new partner Estitech. (2137852)

2. Added new partner Arauco. (2128107)

3. Updated partners Elettromec, Falmec, and Invita. (2130818)

4. Updated partner Adipar, adding the restriction of ribbed glass according to the specified dimensions. (2131912)

5. Added new partner Gaya Lighting. (2133868)

• Corrections

Modulation
1. Fixed the situation where the bottom closure of the internal sliding doors overlapped the side of the module. In the adjustment, the "D" parameter was implemented, allowing the configuration of this overlap.

2. Fixed the situation where the cladding sheet was generated with an excess dimension in the cutting plan. (2132934)

Date: 10/06/2024

• Enhancements

Partners
1. New partner Alpam added. (2119948)

• Corrections

Partners
1. Corrected the situation in which partner Torralba's handles were inserted in incorrect positions in the modules. (2125320)

Date: 21/05/2024

• Partners

Library
1. Updated library of the Torralba handle partner. (2114767)

Materials/Models

1. Updated the Sudati partner. (2117123)

• Corrections

Materials
1. Fixed the situation where the Horizontal, Vertical and Front Office - Composition panels incorrectly applied the Frapê material of the partner Arauco, located in Arauco - Cores e Tecidos - Sethos. (2118388)

Library

1. Corrected the situation in which the 2P L + G module in the Rooms - Cabinets / Drawers - Cabinets line had an incorrect drawer opening. (2117990)

2. Corrected the situation in which the internal face of Room modules was transparent in the 3D environment. (2116420)

3. Fixed a situation where the references of Room items were displayed incorrectly in the 3D environment and in reports. (2116897)

4. Fixed the situation where there was an inconsistency in the horizontal panel of the Rooms line when sending the cutting plan. (2117213)     

Date: 30/04/2024

• Enhancements

Partners
1. Updated Eucatex Partner Material Library (2112482)

2. Updated Placas do Brasil Partner Material Library (2112108)

• Corrections

Library
1. Fixed the situation where applying the Duratex - Unicolores - Original - Horizontal - Arctic White model to modules resulted in the applied edge being Duratex - UltraPremium - Original - Arctic White. (2107194)

2. Fixed the situation where some Eucatex models had incorrect veins when sent to Cut Pro. (2087674)

3. Fixed the situation where drawers with Bicolor fronts were misconfigured. (2110321 e 2112375)

Date: 04/02/2024

• Partners

Materials
1. Updated library of materials from partner Duratex. (2087125)

Library
1. Updated the library of the Tramontina partner. (2104234)

2. Updated the library of the Adipar partner. (2104218)

• Corrections

Materiais
1. Fixed the situation where when applying materials from the Straws/Wickers tab, these were solid color instead of the correct texture. (2103232, 2104539 and 2102708)

Models
1. Fixed the situation where, when using the Bicolor door, the model's design was incorrect in the 3D environment. (2104928)

Date: 03/11/2024

• Enhancements

Library
1. A new Configurable Provencal Door model is available for all lines. You can choose the type of central panel from Wood, Straw (4 options) and Glass via the Models panel. It is also possible to configure the measurements of the crosspieces, the panel advances and their dimensions using the dimension configurator. (2004483)

• Kitchens -  Panels - Panel for Doors

• Kitchens - Fronts|Doors - Provence Configurable

• Corrections

Features Configurator
1. Corrected the situation in which, when using the Cabinets - Corners modules of the Dormitories line of the library with base alignment clearance, the value was not considered correctly.(2088689)

Date: 02/12/2024

• Enhancements

Features Configurator
1. New parameters have been added that make it possible to individually change the Top Side Retreat of the drawers in the can-holder module. You can find them in the tab:

• Kitchens - Drawers - Gaps Bottom/ Top Drawers l Can Holder MDF - Top Right Side Retreat.
• Kitchens - Drawers - Gaps - Bottom/ Top Drawers l Can Holder MDF - Top Left Side Retreat.

• Partners

Materials
1. Updated library of materials from partner Floraplac. (2082412)

Library
1. Updated the library of the Franke partner. (2082799)

2. Updated the library of the Aluni Portas partner. (1943191)

Layout
1. Updated the layout order of the Duoz partner. (2084227)

• Corrections

Cut Pro
1. Fixed the situation where some models of the Eucatex partner were sent with incorrect vein direction in Cut Pro. (2087674)

Date: 01/29/2024

• Enhancements

Features Configurator
1. Changed the positioning of the shelf and partition settings for the Bedroom line. Previously, these settings were available on the Internal Aggregates tab in the Feature Configurator. Now, they have been adjusted to follow the pattern used in the other lines, being modified according to the box model in the Feature Configurator - Cabinet Assembly-Wardrobe - Shelf / Partition. For more information, click here. (2021508)

• Library - Kitchens - Base Cabinets - Cabinets - Can Holder Cabinet MDF.

• Biblioteca - Cozinhas Cava - Inferiores - Balcões - Porta-Latas MDF.

• Now it is possible to configure the dimensions and distances of the Can Holder MDF in the same way as the other drawers in the Feature Configurator - Kitchens - Drawers. (1885099)

• Partners

Library
1. Included the Revoled partner library. (2045112)

2. Included the Aluni Portas partner library. (1943191)

3. Updated the module library of the Sunlux partner. (2080836)

• Corrections

Cut Pro
1. Made adjustment towards the vein of the materials sent to the Cut Pro of the partner Duratex. (2077838)

Date: 01/10/2024

• Enhancements

Sliding Doors
1. Included the option of 30mm side stop for internal sliding doors in Bedrooms. (2072540)

• Partners

Library
1. Updated the module library of the DIMEC partner. (1934859)

• Corrections

Budget/Listing
1. Fixed the situation where mirrors were incorrectly calculated per meter instead of square meter. (2071569)

2. Fixed the situation where the integrated doors of the Contatto partner were not displayed in the Listing. (2069000)

Library
1. Fixed the situation where the thickness of slatted and grooved panel components was listed incorrectly. (2069581)

2. Fixed the situation where the dimensions of the Towers back panels did not allow for the maximum size of the panel. (2070192)

Cut Pro
1. Fixed the situation where some models of the Eucatex partner were sent to the Cut Pro with the inverted vein. (2072614)