Sign in
  1. Promob Support
  2. Manufacture
  3. Promob Cut Pro

Cut Pro - How to define the item's raw material?

Updated
Follow
  
    Available for products   
  
    
      Cut     
    
      Cut Pro     
  
 

 

Which Cut Pro configuration do you use?

Select the configuration used below and directly access the ideal content to help you. 

 

Cut Pro Complete configuration.

Cut Pro Simplified configuration.

 

Review Cut Pro's Complete configuration and Simplified configuration here.

 

Define raw material to Complete mode

 

Within Promob, when applying a model to an item, through the Tool Panel - Models, the item's plate already has raw material and thickness configured through the Configure Features tool.


En.png


This information is imported together with the project into Promob Cut Pro, where it will be visible in the Raw Material column.

Through this column, it is possible to select and change the raw material of the panel that will be used to manufacture the item. If no raw material is selected in this field, the item will not be sent to the Cutting Plan.

 

Maten.png

 

Check how to use the raw material column:

 

1. In the field for editing the raw material, select the desired raw material from the list displayed;
  • It is possible to write in this field to search for a registered raw material;
  • When informing the raw material, a search is performed and the list shows only the items found with the entered term;
2. After selecting a raw material (plate), click Yes in the displayed message, to apply the selected raw material to all items that have the same raw material;
  • If the project has an item that is manufactured with a Wood.Oak - MDF -18 plate and change to Colors.White - MDF - 18, when you choose Yes in the message, all items manufactured in Wood.Oak - MDF -18 will be changed to Colors.White - MDF - 18

1001en.png

In this example, all items that contained the material Wood.Oak - MDF -18 has been changed to Colors.White - MDF - 18, EXCEPT the back panel, because the thickness of the sheet is different from the other sheets, 6 mm and not 18 mm. Therefore, the material was not considered as the same material as the other items.

 

Maten2.png

 

Check out the example below:


EN1.gif

 

Define raw material in Simplified mode

In the Simplified mode, the registration of the items is made from the raw material. Therefore, to define the raw material, it is necessary to guarantee its registration beforehand. Click here to know more about the registration of plates.

With the material already registered:

1. Select the Material tab and choose the material to be used;

2. To use two or more materials, click on the Add Material icon.mceclip1.png

Check out the example below:

 

008en.gif

Powered by Zendesk