The configurations available for the internal sliding aggregates of the Dormitory library are:
Wood Pant Hanger
A - Pants Hanger Retreat: defines the distance between the module and the start of the wooden block. This setting changes the depth of the pant hanger.
Partitions
B - Movable Partitions Front Retreat: defines the distance between the module and the beginning of the movable partition. This setting changes the depth of the movable partition.
C - Fixed Partitions Front Retreat: defines the distance between the module and the beginning of the fixed partition. This setting changes the depth of the fixed partition.
D - Movable Partitions Rear Retreat: sets the distance between the rear of the partition to the bottom.
E - Fixed Partitions Rear Retreat: defines the distance between the rear of the partition and the module limit (regardless of the bottom).
F - Partitions Downgrade for Base Cabinets: defines the recess of the partition.
Shelves
G - Movable Fixed Shelves Front Retreat: defines the distance between the module and the beginning of the shelf. This setting changes the depth of the shelf.
H - Fixed Shelves Front Retreat for Wardrobes: defines the distance between the module and the beginning of the shelf. This setting changes the depth of the shelf.
I - Shelves Front Retreat for Base Cabinets: defines the distance between the module and the beginning of the shelf. This setting changes the depth of the shelf.
J - Shelves Front Retreat for Upper: defines the distance between the module and the beginning of the shelf. This setting changes the depth of the shelf.
K - Movable Shelves Rear Retreat: defines the distance between the bottom of the module and the end of the shelf. Changes the depth of the movable shelf.
L - Fixed Shelves Rear Retreat: defines the distance between the rear of the partition and the module limit (regardless of the bottom).
M - Side Gap: defines the spacing between the side of the module and the shelf. This setting changes the width of the shelf.
N - Top Shelf Height: sets the height of the top shelf of the module.
Slide Shelves
O - Handle Side Gap: defines the distance between the edge of the shelf and the handle. Changes the width of the handle.
P - Handle Height: sets the height of the handle.