Felder Creator 950
Format4 Profit H08
Format4 Profit H20-H22-H22L
Plugin C-Express 920 – TPA ServicePack Version
When integrating with the Plugin C-Express, it is possible to configure, through its Setup, the version to use the TPA ServicePack service. The version of this service determines the correct reading, by the machine, of files with the extension .TNC, generated in Builder.
For certain versions of the service, the files are generated with different structures, so it is necessary to configure the service version in the Plugin Setup.
To configure the use of the TPA ServicePack:
1. Within Promob, access CNC - CNC Configuration;
2. Access Format4 - C-Express 920;
3. When selecting the Plugin name, the TPA ServicePack Version option is displayed;
4. Inform the version of the service installed on the machine;
When generating the program, the files will be generated with the extension .TNC;
See the difference in the structure of the files, according to each version below:
Version higher than 3.3.21
Below version 3.3.21
In version 1.7.9
Settings of Plugin Format4 Profit H80
From Plugin Builder version 188.8.131.52 or higher.
When you add the Prefix information, it is associated with the contents of the .csv file.
Title: is the information that is displayed in the header of the file example: LabelInfo0.
Prefix: is the information that is associated with the content of the attribute, for example: Barcode = C:\WDFlash\Product\variable Programme\variable backpanel.tcn
The information registered in the Prefix, will be displayed in a .csv or xls file, below is an example of a .csv file:
IMPORTANT: Any information that the customer enters in the Prefix field, will be associated with the front of the variable's content.
Automatic label printing
Plugin Builder - 184.108.40.206 or higher.
In the plugin configurations, in the F4Nest model machine, it is possible to configure the automatic printing of labels, thus, when generating the machine programs, the printing of labels is started automatically.
1. Within Promob, access CNC - CNC Settings;
2. Go to Format4 - Profit H80 - Machine;
When selecting the F4Nest machine model, the option Print automatic label will be displayed
NOTES: By default the Print Auto Label attribute is disabled.
When Enabling the attribute print automatic label, the following line will be added to the program: