Builder - Release Notes 1.60 - Version 1.60.17 and higher – Promob Support

IMPORTANT:

The releases are made gradually, so it is possible that your Builder plugin is not in the latest version. To receive it, please update your Promob.
To check changes from previous versions click here.
To check version 1.60.16 and lower, click here.

Check out the latest Builder new below:

▼ 1.60.28.0

Date: 04/11/2024

Plugins liberados

Plugin ABL 210 - B: 1.60.28.0,
Plugin Accord 40 FX: 1.60.28.0,
Plugin AES Extreme Ultra Router: 1.60.28.0,
Plugin AES Go 1300: 1.60.28.0,
Plugin Alca AL1200D: 1.60.28.0,
Plugin Alca AL1928 Weihong 4S Router: 1.60.28.0,
Plugin Alca AL2030F ATC Weihong Nesting: 1.60.28.0,
Plugin Alca AL2030M ATC Weihong Router: 1.60.28.0,
Plugin Alca Machine Router AL2030 3S: 1.60.28.0,
Plugin Alca Machine Router AL2030 ATC: 1.60.28.0,
Plugin Alca Maquinas AL2030B: 1.60.28.0,
Plugin Application of laminates per module report: 1.60.28.0,
Plugin Ardis Cutting Optimizer: 1.60.28.0,
Plugin Asia Robotica CN1325 ATC Router: 1.60.28.0,
Plugin Assembly Report: 1.60.28.0,
Plugin Assembly Steel Report: 1.60.28.0,
Plugin Author200: 1.60.28.0,
Plugin Author327: 1.60.28.0,
Plugin Author436S: 1.60.28.0,
Plugin Author500: 1.60.28.0,
Plugin AuthorM600: 1.60.28.0,
Plugin BHX050: 1.60.28.0,
Plugin BHX055: 1.60.28.0,
Plugin BHX500: 1.60.28.0,
Plugin Biesse Comil Insider FT2: 1.60.28.0,
Plugin Biesse EKO 902: 1.60.28.0,
Plugin Biesse FTT: 1.60.28.0,
Plugin Biesse Rover 22: 1.60.28.0,
Plugin Biesse Rover 24: 1.60.28.0,
Plugin Biesse Rover A4: 1.60.28.0,
Plugin Biesse Rover AS 15: 1.60.28.0,
Plugin Biesse Rover B7: 1.60.28.0,
Plugin Biesse Skill 300 K3: 1.60.28.0,
Plugin Bkrick CR 2130 ATC Syntec Nesting: 1.60.28.0,
Plugin BMG110 - Venture 113-114-115: 1.60.28.0,
Plugin Boole Opticut Optimizer: 1.60.28.0,
Plugin BP 195T: 1.60.28.0,
Plugin Brema EKO 2.1 - Drilling Center: 1.60.28.0,
Plugin Builder: 1.60.28.0,
Plugin Builder Budget: 1.60.28.0,
Plugin Builder Catalog: 1.60.28.0,
Plugin Builder Parts: 1.60.28.0,
Plugin Builder View: 1.60.28.0,
Plugin Builder Xml: 1.60.28.0,
Plugin Buselatto Jet Optima A20-C20-C21: 1.60.28.0,
Plugin C-Express 920: 1.60.28.0,
Plugin CMS Maxima 24B: 1.60.28.0,
Plugin Composed Panel Report: 1.60.28.0,
Plugin Corte Certo: 1.60.28.0,
Plugin CRS Exata Horizontal - Drilling Center: 1.60.28.0,
Plugin CRS Exata Vertical 1000 - Drilling Center: 1.60.28.0,
Plugin CRS Exata Vertical 1200 - Drilling Center: 1.60.28.0,
Plugin Cut List: 1.60.28.0,
Plugin Cut Planning: 1.60.28.0,
Plugin Cut Pro: 1.60.28.0,
Plugin Cut Rite: 1.60.28.0,
Plugin CVL Syntec Router: 1.60.28.0,
Plugin Cyflex 900: 1.60.28.0,
Plugin Cyflex 900BR: 1.60.28.0,
Plugin Cyflex H800: 1.60.28.0,
Plugin Cyflex HP - CX200: 1.60.28.0,
Plugin Cyflex S e SR: 1.60.28.0,
Plugin Delta D3020 Mach3 Router: 1.60.28.0,
Plugin Door Report: 1.60.28.0,
Plugin Drawer Report: 1.60.28.0,
Plugin DRILLTEQ H-308: 1.60.28.0,
Plugin DRILLTEQ V-200: 1.60.28.0,
Plugin Dynestic 7516: 1.60.28.0,
Plugin Easy Jet: 1.60.28.0,
Plugin Easynest 3018 A: 1.60.28.0,
Plugin Easynest 3021: 1.60.28.0,
Plugin Easynest 4021: 1.60.28.0,
Plugin Edge Band Report: 1.60.28.0,
Plugin Emmegi Soft STD - Aluminum: 1.60.28.0,
Plugin ERP Focco: 1.60.28.0,
Plugin ERP Insight: 1.60.28.0,
Plugin ERP Promob: 1.60.28.0,
Plugin ERP Standard: 1.60.28.0,
Plugin ERP WPS: 1.60.28.0,
Plugin ETools Pro ATC 12 2030 Router: 1.60.28.0,
Plugin ETools Pro Max Syntech 60CA Router: 1.60.28.0,
Plugin Etools Start Max ATC 10 Weihong Router: 1.60.28.0,
Plugin Evolution 7405: 1.60.28.0,
Plugin Excitech E4-2128D OSAI Nesting: 1.60.28.0,
Plugin Excitech E42128D Nesting: 1.60.28.0,
Plugin Excitech EHSW1228: 1.60.28.0,
Plugin F9L: 1.60.28.0,
Plugin Felder Creator 950: 1.60.28.0,
Plugin Flexdrill 1000: 1.60.28.0,
Plugin Flexdrill 1200: 1.60.28.0,
Plugin Flexdrill 612 KS: 1.60.28.0,
Plugin Flexdrill 612 M: 1.60.28.0,
Plugin Flexdrill 61200: 1.60.28.0,
Plugin Format4 Profit H08: 1.60.28.0,
Plugin Format4 Profit H20-H22-H22L: 1.60.28.0,
Plugin Format4 Profit H80: 1.60.28.0,
Plugin G2-G3 Genesis Nesting: 1.60.28.0,
Plugin Giben Flat (BDT - Spectra): 1.60.28.0,
Plugin Giben Flat (Selexx - Professional Line - Stratos): 1.60.28.0,
Plugin Giben Flexdrill 6 1000 Evo: 1.60.28.0,
Plugin Giben Flexdrill 6 1200 Pro: 1.60.28.0,
Plugin Giben Flexdrill Max: 1.60.28.0,
Plugin Giben G4 Evo Nesting: 1.60.28.0,
Plugin GPlan: 1.60.28.0,
Plugin HG 2030 Master: 1.60.28.0,
Plugin Hirzt F10: 1.60.28.0,
Plugin Hirzt F6: 1.60.28.0,
Plugin Hirzt F8: 1.60.28.0,
Plugin Holzer HHOS Optimizer Cut: 1.60.28.0,
Plugin Holzher Evolution 7401-7402: 1.60.28.0,
Plugin Holzher Master: 1.60.28.0,
Plugin Homag Weeke ABD 100: 1.60.28.0,
Plugin Homag Weeke ABD 250: 1.60.28.0,
Plugin HuaHua SKH612: 1.60.28.0,
Plugin IF-850 Plus: 1.60.28.0,
Plugin IF-8500: 1.60.28.0,
Plugin IMA BIMA: 1.60.28.0,
Plugin IMA Imagic: 1.60.28.0,
Plugin Inmes IN-100K - Nesting NK300CX Router: 1.60.28.0,
Plugin Integração Promob ERP Start: 1.60.28.0,
Plugin ISO Code: 1.60.28.0,
Plugin Jaragua CNC Mobile Router 2818: 1.60.28.0,
Plugin Jaragua CNC Mobile TAF Router: 1.60.28.0,
Plugin Jaragua CNC TAURUS 2818: 1.60.28.0,
Plugin Jaragua Compact EdingCNC Router: 1.60.28.0,
Plugin Jaragua Solid TAF 2818 Eding CNC Router: 1.60.28.0,
Plugin Jaragua Vision TAF Router: 1.60.28.0,
Plugin JaraguaCNC Router Exclusive 28182: 1.60.28.0,
Plugin JaraguaCNC Solid: 1.60.28.0,
Plugin JaraguaCNC Vision: 1.60.28.0,
Plugin Jaraguá CNC Vision DH EdingCNC Router: 1.60.28.0,
Plugin KDT KN 2409NL LNC Router: 1.60.28.0,
Plugin Klipper RSL Taiwan Baoyuan Router: 1.60.28.0,
Plugin Lepton Optimizer: 1.60.28.0,
Plugin M400F: 1.60.28.0,
Plugin Mach CNC MACHPRO ATC: 1.60.28.0,
Plugin Mach CNC Router Elite Super Drill 2819: 1.60.28.0,
Plugin Mach Commander NC Studio Router: 1.60.28.0,
Plugin Mach Elite 3020 Mach3 2S Router: 1.60.28.0,
Plugin Mach Pro Turbo DDCS Expert Router: 1.60.28.0,
Plugin Mach Pro Turbo Duo DDCS Expert Router: 1.60.28.0,
Plugin Mach Turbo DNA DDCS Expert Router: 1.60.28.0,
Plugin Mach Turbo Duo DNA Weihong Router: 1.60.28.0,
Plugin Mak CNC Titan Agile DDCS Router: 1.60.28.0,
Plugin Mak Pro 3000 Mach3 Router: 1.60.28.0,
Plugin Manufacturing Cabinet Report: 1.60.28.0,
Plugin Manufacturing Component Report: 1.60.28.0,
Plugin Marchiori ATC2030 Weihong Router: 1.60.28.0,
Plugin Marchiori LD 3000 Mach3 Router: 1.60.28.0,
Plugin Master Drill TF 500: 1.60.28.0,
Plugin Masterwood Nesting MW: 1.60.28.0,
Plugin MasterWood Project 415: 1.60.28.0,
Plugin MasterWood Project 465: 1.60.28.0,
Plugin Mobitek SKI612 - Drilling Center: 1.60.28.0,
Plugin Morbidelli M100: 1.60.28.0,
Plugin Morbidelli P800: 1.60.28.0,
Plugin Morbidelli UX100: 1.60.28.0,
Plugin Nanxing NCB2412: 1.60.28.0,
Plugin Nanxing NCB612: 1.60.28.0,
Plugin Nanxing NCG3021L Nesting: 1.60.28.0,
Plugin OMNICNC 1325 Router: 1.60.28.0,
Plugin OptiPlanning: 1.60.28.0,
Plugin Ottimo-Perfect Cut: 1.60.28.0,
Plugin Point 2: 1.60.28.0,
Plugin Pratika 280: 1.60.28.0,
Plugin Pratika 310: 1.60.28.0,
Plugin Pratika 315: 1.60.28.0,
Plugin Pratika 320: 1.60.28.0,
Plugin Pratika 325: 1.60.28.0,
Plugin PratixS: 1.60.28.0,
Plugin Profile Report: 1.60.28.0,
Plugin Project 250: 1.60.28.0,
Plugin Project 450: 1.60.28.0,
Plugin Project TF: 1.60.28.0,
Plugin PTP: 1.60.28.0,
Plugin PTP 160: 1.60.28.0,
Plugin Puchased Item Report: 1.60.28.0,
Plugin Raizen Bravus Syntec Router: 1.60.28.0,
Plugin Raizen Solid DSP Router: 1.60.28.0,
Plugin Raizen Solid TAF Router: 1.60.28.0,
Plugin Raizen Vision One TAF Syntec Router: 1.60.28.0,
Plugin Raizen Vision Plus Syntec Router: 1.60.28.0,
Plugin Raizen Vision TAF Router: 1.60.28.0,
Plugin Rhino RMC 3000 Absolute ATC Mach3 Router: 1.60.28.0,
Plugin Rhino RMC 3000 Absolute Mach3 Router: 1.60.28.0,
Plugin Rhino RMC 3000 Plus DDCS Router: 1.60.28.0,
Plugin Router Aspan: 1.60.28.0,
Plugin Router EnRouter CNC: 1.60.28.0,
Plugin Rover A 1332: 1.60.28.0,
Plugin Rover A 1532: 1.60.28.0,
Plugin Rover A 1542: 1.60.28.0,
Plugin Rover A 1625-1632-1643-1659: 1.60.28.0,
Plugin Rover A 3.30: 1.60.28.0,
Plugin Rover C9: 1.60.28.0,
Plugin Rover K FT 1531: 1.60.28.0,
Plugin Rover1836GFT: 1.60.28.0,
Plugin Rover20: 1.60.28.0,
Plugin Rover2231GFT: 1.60.28.0,
Plugin SARTWOOD PT6: 1.60.28.0,
Plugin SCM Pratika 1000: 1.60.28.0,
Plugin SCM Startech cn plus: 1.60.28.0,
Plugin SCM Startech cn v: 1.60.28.0,
Plugin Sideco SIR 1325 ATC Router: 1.60.28.0,
Plugin Skipper 100: 1.60.28.0,
Plugin Skipper 130: 1.60.28.0,
Plugin Skipper V31: 1.60.28.0,
Plugin SOPH MSZ600: 1.60.28.0,
Plugin Spazio3D: 1.60.28.0,
Plugin Speedy Factory: 1.60.28.0,
Plugin Starkend CN9-1828F Syntec Nesting: 1.60.28.0,
Plugin Startech: 1.60.28.0,
Plugin Tech 99L: 1.60.28.0,
Plugin Tech Z1: 1.60.28.0,
Plugin Tech Z2: 1.60.28.0,
Plugin Tech Z25: 1.60.28.0,
Plugin Tech Z30: 1.60.28.0,
Plugin Tech Z5: 1.60.28.0,
Plugin TekMaq 3020 Mach2 Router: 1.60.28.0,
Plugin Twister750NX: 1.60.28.0,
Plugin Uniflex: 1.60.28.0,
Plugin Universal NB-3618: 1.60.28.0,
Plugin Universal NB-3622: 1.60.28.0,
Plugin Universal TV 3615: 1.60.28.0,
Plugin Usaberg ATC 2819 Router: 1.60.28.0,
Plugin Usikraft Discovery ATC Router: 1.60.28.0,
Plugin Usikraft Evoque 2030 ATC Router: 1.60.28.0,
Plugin Usikraft Smart DSP A11 Router: 1.60.28.0,
Plugin Vantage 24-25-26 series - Nesting: 1.60.28.0,
Plugin Venture 107: 1.60.28.0,
Plugin Venture 108: 1.60.28.0,
Plugin Venture 1M: 1.60.28.0,
Plugin Venture 22L: 1.60.28.0,
Plugin Venture 230M: 1.60.28.0,
Plugin Venture 2M: 1.60.28.0,
Plugin Venture 316: 1.60.28.0,
Plugin Venture 3M: 1.60.28.0,
Plugin Venture 8M: 1.60.28.0,
Plugin Venture BMG 300: 1.60.28.0,
Plugin Vetor Opus: 1.60.28.0,
Plugin Vitap Point K2: 1.60.28.0,
Plugin Warehouse Report: 1.60.28.0,
Plugin Weeke BHC280: 1.60.28.0,
Plugin Weeke BHT500: 1.60.28.0,
Plugin Weeke Optimat BHC250: 1.60.28.0,
Plugin WIBJ5: 1.60.28.0,
Plugin WPS Optimizer: 1.60.28.0,
Plugin X200 CELL - Nesting: 1.60.28.0

Update Reversion

Compatibility

1. Compatibility with Promob has been reverted; Builder is now compatible with version 5.60.35 of Promob.

Labels - Compatibility

1. The implementation of the new field option in tags with additional data information originating from the client/project has been reverted, which was made available in version 1.60.26.0. (2050628)

Integration with plugins ERP - Compatibility

1. The method by which Builder retrieves the project identifier information to add to the XML file generated during integration with ERP plugins has been reverted, which was made available in version 1.60.26.0. (2149902, 2157349)

▼ 1.60.27.1

Date: 10/28/2024

Released Plugins

Plugin Builder Catalog: 1.60.27.1
Plugin Builder Parts: 1.60.27.1
Plugin Buselatto Jet Optima A20-C20-C21: 1.60.27.1
Plugin Cut Pro: 1.60.27.1
Plugin ERP WPS: 1.60.27.1
Plugin G2-G3 Genesis Nesting: 1.60.27.1
Plugin Giben Flexdrill 6 1200 Pro: 1.60.27.1
Plugin Jaraguá CNC Vision DH EdingCNC Router: 1.60.27.1

Enhancements

Import Settings

1. Implemented the improvement that allows the import of images from labels and complete labels. Two separate tabs have been created: one for Label Image and another for Full Label, where you can select which label to import. It is important to note that no link is made with the tag in the plugins, it is only imported. The tags displayed on this screen are the tags previously saved in the plugins. For more information, click here.

New Machine Plugin

1. Added a new machine plugin, Jaragua CNC Vision DH EdingCNC Router Plugin.

Plugins Profit H80 and Profit H08

1. Added the fields of the CSV file of Nesting to the program of the format . F4G. For more information about the Profit H80 plugin, click here or for information about the Profit H08 plugin, click here.

Corrections

Opening Builder / Connection

1. Fixed the situation of connection to the internet that affected some customers. Now, three connection tests are performed to ensure the stability of the connection. For more information on the situation, click here.

Maker / Cut Pro

1. Adjusted the situation where when sending a material name in CSV to Cut Pro, the system sent the default name instead of the customer-customized name. Now, the custom name defined by the client in Maker is correctly sent. (2149278)

CNC Machines

1. Fixed the situation where it was not possible to select more than two tools for the tear or machining processes.

Production Materials

1. Corrected the situation in which an inconformity occurred when generating technical drawings using materials downloaded from the internet.

New Interface

1. Adjustments have been made to the new interface, correcting the alignment in the Only selected submenu within the Integrators button, as well as adjustments to the visibility of buttons. (2168875 and 2170393)

Exploded Budget

1. Adjusted the situation in which, under certain conditions, the budget report did not display the correct number of machining operations. (2143566)

Machine Programs

1. Corrected the situation in which the information about the non-generation of the program was not displayed when using the Gênio integration system. (2144891)

2. Adjusted the correct inclusion of the process when there is an associated rule. (2167450)

Processes

1. Fixed the situation where it was not possible to permanently delete processes from Libraries. For more information on Inconformity Processes not available, click here. (2165582)

Plugin Builder Parts

1. Fixed situation where library attributes were not fetched correctly when using Builder Parts. (2162206)

Plugin Giben Flexdrill 6 1200 Pro

1. Adjusted the positioning of the tear operation when performed vertically. (2161727)

2. Adjusted the generation of the machine program for cutter cuts, correcting the minimum operable position values of the cutter for lower and upper face, now set to 0 (zero). In addition, the options for evaluating the rotation of the parts were enabled in the configuration.

Plugin ERP WPS

1. Adjusted the situation in which the B program of the operations was not listed when generating the files for the ERP WPS plugin. (2170312)

Plugin IF-8500

1. Adjusted the situation in which the value of the position of the slots made with a saw was incorrect. (2162723)

Plugin JetOptima

1. Fixed the situation where JetOptima machine did not generate machining and the countersink machining was incorrect. (2164766)

Plugins G2/G3 Genesis Evo

1. Fixed a situation where when you deselecting the Generate contour only for irregular parts option in the Closet Builder, the attribute was not included in the generation settings, resulting in a mismatch. Now this option is only visible for the TPA integration model. In addition, the command <100 Description of the part was positioned after the contour lines, being only applied to the DELTA integration model. (2165774)

Setup Machines Router

1. Fixed the situation so that the Router machines load correctly the default settings on the opening. (2162732)

▼ 1.60.27.0

Date: 15/10/2024

Released Plugins

Plugin Builder: 1.60.27.0,
Plugin ABL 210 - B: 1.60.27.0,
Plugin Accord 40 FX: 1.60.27.0,
Plugin AES Extreme Ultra Router: 1.60.27.0,
Plugin AES Go 1300: 1.60.27.0,
Plugin Alca AL1200D: 1.60.27.0,
Plugin Alca AL1928 Weihong 4S Router: 1.60.27.0,
Plugin Alca AL2030F ATC Weihong Nesting: 1.60.27.0,
Plugin Alca AL2030M ATC Weihong Router: 1.60.27.0,
Plugin Alca Machine Router AL2030 3S: 1.60.27.0,
Plugin Alca Machine Router AL2030 ATC: 1.60.27.0,
Plugin Alca Maquinas AL2030B: 1.60.27.0,
Plugin Application of laminates per module report: 1.60.27.0,
Plugin Ardis Cutting Optimizer: 1.60.27.0,
Plugin Asia Robotica CN1325 ATC Router: 1.60.27.0,
Plugin Assembly Report: 1.60.27.0,
Plugin Assembly Steel Report: 1.60.27.0,
Plugin Author200: 1.60.27.0,
Plugin Author327: 1.60.27.0,
Plugin Author436S: 1.60.27.0,
Plugin Author500: 1.60.27.0,
Plugin AuthorM600: 1.60.27.0,
Plugin BHX050: 1.60.27.0,
Plugin BHX055: 1.60.27.0,
Plugin BHX500: 1.60.27.0,
Plugin Biesse Comil Insider FT2: 1.60.27.0,
Plugin Biesse EKO 902: 1.60.27.0,
Plugin Biesse FTT: 1.60.27.0,
Plugin Biesse Rover 22: 1.60.27.0,
Plugin Biesse Rover 24: 1.60.27.0,
Plugin Biesse Rover A4: 1.60.27.0,
Plugin Biesse Rover AS 15: 1.60.27.0,
Plugin Biesse Rover B7: 1.60.27.0,
Plugin Biesse Skill 300 K3: 1.60.27.0,
Plugin Bkrick CR 2130 ATC Syntec Nesting: 1.60.27.0,
Plugin BMG110 - Venture 113-114-115: 1.60.27.0,
Plugin Boole Opticut Optimizer: 1.60.27.0,
Plugin BP 195T: 1.60.27.0,
Plugin Brema EKO 2.1 - Drilling Center: 1.60.27.0,
Plugin Builder: 1.60.27.0,
Plugin Builder Budget: 1.60.27.0,
Plugin Builder Catalog: 1.60.27.0,
Plugin Builder Parts: 1.60.27.0,
Plugin Builder View: 1.60.27.0,
Plugin Builder Xml: 1.60.27.0,
Plugin Buselatto Jet Optima A20-C20-C21: 1.60.27.0,
Plugin C-Express 920: 1.60.27.0,
Plugin CMS Maxima 24B: 1.60.27.0,
Plugin Composed Panel Report: 1.60.27.0,
Plugin Corte Certo: 1.60.27.0,
Plugin CRS Exata Horizontal - Drilling Center: 1.60.27.0,
Plugin CRS Exata Vertical 1000 - Drilling Center: 1.60.27.0,
Plugin CRS Exata Vertical 1200 - Drilling Center: 1.60.27.0,
Plugin Cut List: 1.60.27.0,
Plugin Cut Planning: 1.60.27.0,
Plugin Cut Pro: 1.60.27.0,
Plugin Cut Rite: 1.60.27.0,
Plugin CVL Syntec Router: 1.60.27.0,
Plugin Cyflex 900: 1.60.27.0,
Plugin Cyflex 900BR: 1.60.27.0,
Plugin Cyflex H800: 1.60.27.0,
Plugin Cyflex HP - CX200: 1.60.27.0,
Plugin Cyflex S e SR: 1.60.27.0,
Plugin Delta D3020 Mach3 Router: 1.60.27.0,
Plugin Door Report: 1.60.27.0,
Plugin Drawer Report: 1.60.27.0,
Plugin DRILLTEQ H-308: 1.60.27.0,
Plugin DRILLTEQ V-200: 1.60.27.0,
Plugin Dynestic 7516: 1.60.27.0,
Plugin Easy Jet: 1.60.27.0,
Plugin Easynest 3018 A: 1.60.27.0,
Plugin Easynest 3021: 1.60.27.0,
Plugin Easynest 4021: 1.60.27.0,
Plugin Edge Band Report: 1.60.27.0,
Plugin Emmegi Soft STD - Aluminum: 1.60.27.0,
Plugin ERP Focco: 1.60.27.0,
Plugin ERP Insight: 1.60.27.0,
Plugin ERP Promob: 1.60.27.0,
Plugin ERP Standard: 1.60.27.0,
Plugin ERP WPS: 1.60.27.0,
Plugin ETools Pro ATC 12 2030 Router: 1.60.27.0,
Plugin ETools Pro Max Syntech 60CA Router: 1.60.27.0,
Plugin Etools Start Max ATC 10 Weihong Router: 1.60.27.0,
Plugin Evolution 7405: 1.60.27.0,
Plugin Excitech E4-2128D OSAI Nesting: 1.60.27.0,
Plugin Excitech E42128D Nesting: 1.60.27.0,
Plugin Excitech EHSW1228: 1.60.27.0,
Plugin F9L: 1.60.27.0,
Plugin Felder Creator 950: 1.60.27.0,
Plugin Flexdrill 1000: 1.60.27.0,
Plugin Flexdrill 1200: 1.60.27.0,
Plugin Flexdrill 612 KS: 1.60.27.0,
Plugin Flexdrill 612 M: 1.60.27.0,
Plugin Flexdrill 61200: 1.60.27.0,
Plugin Format4 Profit H08: 1.60.27.0,
Plugin Format4 Profit H20-H22-H22L: 1.60.27.0,
Plugin Format4 Profit H80: 1.60.27.0,
Plugin G2-G3 Genesis Nesting: 1.60.27.0,
Plugin Giben Flat (BDT - Spectra): 1.60.27.0,
Plugin Giben Flat (Selexx - Professional Line - Stratos): 1.60.27.0,
Plugin Giben Flexdrill 6 1000 Evo: 1.60.27.0,
Plugin Giben Flexdrill 6 1200 Pro: 1.60.27.0,
Plugin Giben Flexdrill Max: 1.60.27.0,
Plugin Giben G4 Evo Nesting: 1.60.27.0,
Plugin GPlan: 1.60.27.0,
Plugin HG 2030 Master: 1.60.27.0,
Plugin Hirzt F10: 1.60.27.0,
Plugin Hirzt F6: 1.60.27.0,
Plugin Hirzt F8: 1.60.27.0,
Plugin Holzer HHOS Optimizer Cut: 1.60.27.0,
Plugin Holzher Evolution 7401-7402: 1.60.27.0,
Plugin Holzher Master: 1.60.27.0,
Plugin Homag Weeke ABD 100: 1.60.27.0,
Plugin Homag Weeke ABD 250: 1.60.27.0,
Plugin HuaHua SKH612: 1.60.27.0,
Plugin IF-850 Plus: 1.60.27.0,
Plugin IF-8500: 1.60.27.0,
Plugin IMA BIMA: 1.60.27.0,
Plugin IMA Imagic: 1.60.27.0,
Plugin Inmes IN-100K - Nesting NK300CX Router: 1.60.27.0,
Plugin Integração Promob ERP Start: 1.60.27.0,
Plugin ISO Code: 1.60.27.0,
Plugin Jaragua CNC Mobile Router 2818: 1.60.27.0,
Plugin Jaragua CNC Mobile TAF Router: 1.60.27.0,
Plugin Jaragua CNC TAURUS 2818: 1.60.27.0,
Plugin Jaragua Compact EdingCNC Router: 1.60.27.0,
Plugin Jaragua Solid TAF 2818 Eding CNC Router: 1.60.27.0,
Plugin Jaragua Vision TAF Router: 1.60.27.0,
Plugin JaraguaCNC Router Exclusive 28182: 1.60.27.0,
Plugin JaraguaCNC Solid: 1.60.27.0,
Plugin JaraguaCNC Vision: 1.60.27.0,
Plugin KDT KN 2409NL LNC Router: 1.60.27.0,
Plugin Klipper RSL Taiwan Baoyuan Router: 1.60.27.0,
Plugin Lepton Optimizer: 1.60.27.0,
Plugin M400F: 1.60.27.0,
Plugin Mach CNC MACHPRO ATC: 1.60.27.0,
Plugin Mach CNC Router Elite Super Drill 2819: 1.60.27.0,
Plugin Mach Commander NC Studio Router: 1.60.27.0,
Plugin Mach Elite 3020 Mach3 2S Router: 1.60.27.0,
Plugin Mach Pro Turbo DDCS Expert Router: 1.60.27.0,
Plugin Mach Pro Turbo Duo DDCS Expert Router: 1.60.27.0,
Plugin Mach Turbo DNA DDCS Expert Router: 1.60.27.0,
Plugin Mach Turbo Duo DNA Weihong Router: 1.60.27.0,
Plugin Mak CNC Titan Agile DDCS Router: 1.60.27.0,
Plugin Mak Pro 3000 Mach3 Router: 1.60.27.0,
Plugin Manufacturing Cabinet Report: 1.60.27.0,
Plugin Manufacturing Component Report: 1.60.27.0,
Plugin Marchiori ATC2030 Weihong Router: 1.60.27.0,
Plugin Marchiori LD 3000 Mach3 Router: 1.60.27.0,
Plugin Master Drill TF 500: 1.60.27.0,
Plugin Masterwood Nesting MW: 1.60.27.0,
Plugin MasterWood Project 415: 1.60.27.0,
Plugin MasterWood Project 465: 1.60.27.0,
Plugin Mobitek SKI612 - Drilling Center: 1.60.27.0,
Plugin Morbidelli M100: 1.60.27.0,
Plugin Morbidelli P800: 1.60.27.0,
Plugin Morbidelli UX100: 1.60.27.0,
Plugin Nanxing NCB2412: 1.60.27.0,
Plugin Nanxing NCB612: 1.60.27.0,
Plugin Nanxing NCG3021L Nesting: 1.60.27.0,
Plugin OMNICNC 1325 Router: 1.60.27.0,
Plugin OptiPlanning: 1.60.27.0,
Plugin Ottimo-Perfect Cut: 1.60.27.0,
Plugin Point 2: 1.60.27.0,
Plugin Pratika 280: 1.60.27.0,
Plugin Pratika 310: 1.60.27.0,
Plugin Pratika 315: 1.60.27.0,
Plugin Pratika 320: 1.60.27.0,
Plugin Pratika 325: 1.60.27.0,
Plugin PratixS: 1.60.27.0,
Plugin Profile Report: 1.60.27.0,
Plugin Project 250: 1.60.27.0,
Plugin Project 450: 1.60.27.0,
Plugin Project TF: 1.60.27.0,
Plugin PTP: 1.60.27.0,
Plugin PTP 160: 1.60.27.0,
Plugin Puchased Item Report: 1.60.27.0,
Plugin Raizen Bravus Syntec Router: 1.60.27.0,
Plugin Raizen Solid DSP Router: 1.60.27.0,
Plugin Raizen Solid TAF Router: 1.60.27.0,
Plugin Raizen Vision One TAF Syntec Router: 1.60.27.0,
Plugin Raizen Vision Plus Syntec Router: 1.60.27.0,
Plugin Raizen Vision TAF Router: 1.60.27.0,
Plugin Rhino RMC 3000 Absolute ATC Mach3 Router: 1.60.27.0,
Plugin Rhino RMC 3000 Absolute Mach3 Router: 1.60.27.0,
Plugin Rhino RMC 3000 Plus DDCS Router: 1.60.27.0,
Plugin Router Aspan: 1.60.27.0,
Plugin Router EnRouter CNC: 1.60.27.0,
Plugin Rover A 1332: 1.60.27.0,
Plugin Rover A 1532: 1.60.27.0,
Plugin Rover A 1542: 1.60.27.0,
Plugin Rover A 1625-1632-1643-1659: 1.60.27.0,
Plugin Rover A 3.30: 1.60.27.0,
Plugin Rover C9: 1.60.27.0,
Plugin Rover K FT 1531: 1.60.27.0,
Plugin Rover1836GFT: 1.60.27.0,
Plugin Rover20: 1.60.27.0,
Plugin Rover2231GFT: 1.60.27.0,
Plugin SARTWOOD PT6: 1.60.27.0,
Plugin SCM Pratika 1000: 1.60.27.0,
Plugin SCM Startech cn plus: 1.60.27.0,
Plugin SCM Startech cn v: 1.60.27.0,
Plugin Sideco SIR 1325 ATC Router: 1.60.27.0,
Plugin Skipper 100: 1.60.27.0,
Plugin Skipper 130: 1.60.27.0,
Plugin Skipper V31: 1.60.27.0,
Plugin SOPH MSZ600: 1.60.27.0,
Plugin Spazio3D: 1.60.27.0,
Plugin Speedy Factory: 1.60.27.0,
Plugin Starkend CN9-1828F Syntec Nesting: 1.60.27.0,
Plugin Startech: 1.60.27.0,
Plugin Tech 99L: 1.60.27.0,
Plugin Tech Z1: 1.60.27.0,
Plugin Tech Z2: 1.60.27.0,
Plugin Tech Z25: 1.60.27.0,
Plugin Tech Z30: 1.60.27.0,
Plugin Tech Z5: 1.60.27.0,
Plugin TekMaq 3020 Mach2 Router: 1.60.27.0,
Plugin Twister750NX: 1.60.27.0,
Plugin Uniflex: 1.60.27.0,
Plugin Universal NB-3618: 1.60.27.0,
Plugin Universal NB-3622: 1.60.27.0,
Plugin Universal TV 3615: 1.60.27.0,
Plugin Usaberg ATC 2819 Router: 1.60.27.0,
Plugin Usikraft Discovery ATC Router: 1.60.27.0,
Plugin Usikraft Evoque 2030 ATC Router: 1.60.27.0,
Plugin Usikraft Smart DSP A11 Router: 1.60.27.0,
Plugin Vantage 24-25-26 series - Nesting: 1.60.27.0,
Plugin Venture 107: 1.60.27.0,
Plugin Venture 108: 1.60.27.0,
Plugin Venture 1M: 1.60.27.0,
Plugin Venture 22L: 1.60.27.0,
Plugin Venture 230M: 1.60.27.0,
Plugin Venture 2M: 1.60.27.0,
Plugin Venture 316: 1.60.27.0,
Plugin Venture 3M: 1.60.27.0,
Plugin Venture 8M: 1.60.27.0,
Plugin Venture BMG 300: 1.60.27.0,
Plugin Vetor Opus: 1.60.27.0,
Plugin Vitap Point K2: 1.60.27.0,
Plugin Warehouse Report: 1.60.27.0,
Plugin Weeke BHC280: 1.60.27.0,
Plugin Weeke BHT500: 1.60.27.0,
Plugin Weeke Optimat BHC250: 1.60.27.0,
Plugin WIBJ5: 1.60.27.0,
Plugin WPS Optimizer: 1.60.27.0,
Plugin X200 CELL - Nesting: 1.60.27.0

Enhancements

Label Editor

1. A new verification has been added for the display of the Label Editor menu. Now, it will only be displayed if there is a plugin that requires a label image or a complete label.

2. For a better user experience, explanatory tooltips have been added to the Complete Label menu.

peça.png

3. Now the Label Editor displays only the necessary page; that is, if there is only one ERP integration plugin, only the Label Image tab is shown. If there is a Router machine, both pages are displayed.

somentePaginaCorreta .png

4. The requirement to provide the label name in the registration has been added. If it is not provided, the following validation message is displayed.

validaNomeEtiqueta .png

5. In the registration of a new complete Label model, the system now suggests valid default values for generation.

Corrections

Integration

1. The issue where the ERP WPS Plugin required the inclusion of a label model to generate the integration has been fixed. (2167907)

2. The issue where the ERP integrators did not copy the label to the selected location has been fixed. (2168356)

▼ 1.60.26.0

Date: 08/10/202

IMPORTANT: compatibility with Promob version 5.60.36.0.

Enhancements

Labels

1. Implemented the option for a new field in the labels with additional data information originating from the client/project. Learn more here. (2050628)

New Machine plugin

1. A new machine plugin was added, Plugin Alca AL1928 Weihong 4S Router.

Corrections

Setup

1. The issue where the Save button in the machine setup did not save has been fixed.

Labels

1. The situation where it prompted to save twice when deleting a label has been corrected.

2. The situation where the option to save the label in a location different from the program generation was not considered has been fixed. (2165566)

3. The issue where labels were not generated for the Plugin Rover 1836GFT has been fixed. (2167271)

Integration with ERP plugins

1. The method by which the Builder retrieves the project identifier information to include in the XML file generated during the integration with ERP plugins has been updated. This is in conjunction with adjustments made by Promob and Connect. (2149902 and 2157349)

▼ 1.60.25.2

Date: 19/09/2024

Released Plugins

Plugin ABL 210 - B 1.60.25.2
Plugin Accord 40 FX 1.60.25.1
Plugin Alca AL1200D 1.60.25.2
Plugin Alca AL2030M ATC Weihong Router 1.60.25.2
Plugin Ardis Cutting Optimizer 1.60.25.2
Plugin Author200 1.60.25.1
Plugin Author327 1.60.25.1
Plugin Author436S 1.60.25.1
Plugin Author500 1.60.25.1
Plugin AuthorM600 1.60.25.1
Plugin BHX050 1.60.25.1
Plugin BHX055 1.60.25.2
Plugin BHX500 1.60.25.2
Plugin Biesse Comil Insider FT2 1.60.25.1
Plugin Biesse EKO 902 1.60.25.1
Plugin Biesse FTT 1.60.25.1
Plugin Biesse Rover 22 1.60.25.2
Plugin Biesse Rover 24 1.60.25.1
Plugin Biesse Rover A4 1.60.25.1
Plugin Biesse Rover AS 15 1.60.25.2
Plugin Biesse Rover B7 1.60.25.1
Plugin Biesse Skill 300 K3 1.60.25.1
Plugin BMG110 - Venture 113-114-115 1.60.25.1
Plugin Boole Opticut Optimizer 1.60.25.2
Plugin BP 195T 1.60.25.1
Plugin Brema EKO 2.1 - Drilling Center 1.60.25.2
Plugin Builder 1.60.25.2
Plugin Builder Budget 1.60.25.2
Plugin Builder Catalog 1.60.25.2
Plugin Builder Parts 1.60.25.2
Plugin Builder Xml 1.60.25.2
Plugin Buselatto Jet Optima A20-C20-C21 1.60.25.1
Plugin C-Express 920 1.60.25.1
Plugin CMS Maxima 24B 1.60.25.2
Plugin Corte Certo 1.60.25.2
Plugin CRS Exata Horizontal - Drilling Center 1.60.25.1
Plugin CRS Exata Vertical 1000 - Drilling Center 1.60.25.2
Plugin CRS Exata Vertical 1200 - Drilling Center 1.60.25.1
Plugin Cut List 1.60.25.2
Plugin Cut Planning 1.60.25.2
Plugin Cut Pro 1.60.25.2
Plugin Cut Rite 1.60.25.2
Plugin Cyflex 900 1.60.25.1
Plugin Cyflex 900BR 1.60.25.1
Plugin Cyflex H800 1.60.25.1
Plugin Cyflex HP - CX200 1.60.25.2
Plugin Cyflex S e SR 1.60.25.2
Plugin DRILLTEQ H-308 1.60.25.2
Plugin DRILLTEQ V-200 1.60.25.1
Plugin Dynestic 7516 1.60.25.1
Plugin Easy Jet 1.60.25.1
Plugin Easynest 3018 A 1.60.25.1
Plugin Easynest 3021 1.60.25.1
Plugin Easynest 4021 1.60.25.1
Plugin ERP Focco 1.60.25.2
Plugin ERP Insight 1.60.25.2
Plugin ERP Promob 1.60.25.2
Plugin ERP Standard 1.60.25.2
Plugin ERP WPS 1.60.25.2
Plugin Evolution 7405 1.60.25.2
Plugin Excitech E42128D Nesting 1.60.25.2
Plugin Excitech EHSW1228 1.60.25.2
Plugin F9L 1.60.25.1
Plugin Felder Creator 950 1.60.25.1
Plugin Flexdrill 1000 1.60.25.2
Plugin Flexdrill 1200 1.60.25.1
Plugin Flexdrill 612 KS 1.60.25.1
Plugin Flexdrill 612 M 1.60.25.1
Plugin Flexdrill 61200 1.60.25.1
Plugin Format4 Profit H08 1.60.25.1
Plugin Format4 Profit H20-H22-H22L 1.60.25.1
Plugin Format4 Profit H80 1.60.25.2
Plugin G2-G3 Genesis Nesting 1.60.25.2
Plugin Giben Flat (BDT - Spectra) 1.60.25.1
Plugin Giben Flat (Selexx - Professional Line - Stratos) 1.60.25.1
Plugin Giben Flexdrill 6 1000 Evo 1.60.25.1
Plugin Giben Flexdrill 6 1200 Pro 1.60.25.1
Plugin Giben Flexdrill Max 1.60.25.2
Plugin Giben G4 Evo Nesting 1.60.25.2
Plugin GPlan 1.60.25.2
Plugin Hirzt F10 1.60.25.1
Plugin Hirzt F6 1.60.25.1
Plugin Hirzt F8 1.60.25.1
Plugin Holzer HHOS Optimizer Cut 1.60.25.2
Plugin Holzher Evolution 7401-7402 1.60.25.2
Plugin Holzher Master 1.60.25.1
Plugin IF-850 Plus 1.60.25.1
Plugin IF-8500 1.60.25.1
Plugin IMA BIMA 1.60.25.2
Plugin IMA Imagic 1.60.25.2
Plugin Integração Promob ERP Start 1.60.25.2
Plugin Lepton Optimizer 1.60.25.2
Plugin M400F 1.60.25.1
Plugin Master Drill TF 500 1.60.25.1
Plugin Masterwood Nesting MW 1.60.25.1
Plugin MasterWood Project 415 1.60.25.1
Plugin MasterWood Project 465 1.60.25.1
Plugin Mobitek SKI612 - Drilling Center 1.60.25.2
Plugin Morbidelli M100 1.60.25.2
Plugin Morbidelli P800 1.60.25.2
Plugin Morbidelli UX100 1.60.25.1
Plugin Nanxing NCG3021L Nesting 1.60.25.2
Plugin OptiPlanning 1.60.25.2
Plugin Ottimo-Perfect Cut 1.60.25.2
Plugin Point 2 1.60.25.1
Plugin Pratika 280 1.60.25.1
Plugin Pratika 310 1.60.25.1
Plugin Pratika 315 1.60.25.1
Plugin Pratika 320 1.60.25.1
Plugin Pratika 325 1.60.25.1
Plugin PratixS 1.60.25.1
Plugin Project 250 1.60.25.1
Plugin Project 450 1.60.25.1
Plugin Project TF 1.60.25.1
Plugin PTP 1.60.25.1
Plugin PTP 160 1.60.25.1
Plugin Router Aspan 1.60.25.2
Plugin Router EnRouter CNC 1.60.25.2
Plugin Rover A 1332 1.60.25.2
Plugin Rover A 1532 1.60.25.2
Plugin Rover A 1542 1.60.25.2
Plugin Rover A 1625-1632-1643-1659 1.60.25.2
Plugin Rover A 3.30 1.60.25.2
Plugin Rover C9 1.60.25.1
Plugin Rover K FT 1531 1.60.25.1
Plugin Rover1836GFT 1.60.25.1
Plugin Rover20 1.60.25.1
Plugin Rover2231GFT 1.60.25.1
Plugin SARTWOOD PT6 1.60.25.2
Plugin SCM Pratika 1000 1.60.25.2
Plugin Skipper 100 1.60.25.2
Plugin Skipper 130 1.60.25.2
Plugin Skipper V31 1.60.25.1
Plugin SOPH MSZ600 1.60.25.2
Plugin Spazio3D 1.60.25.1
Plugin Speedy Factory 1.60.25.2
Plugin Startech 1.60.25.2
Plugin Tech 99L 1.60.25.1
Plugin Tech Z1 1.60.25.1
Plugin Tech Z2 1.60.25.1
Plugin Tech Z25 1.60.25.1
Plugin Tech Z30 1.60.25.1
Plugin Tech Z5 1.60.25.1
Plugin Twister750NX 1.60.25.1
Plugin Uniflex 1.60.25.1
Plugin Universal NB-3618 1.60.25.1
Plugin Universal NB-3622 1.60.25.1
Plugin Universal TV 3615 1.60.25.1
Plugin Vantage 24-25-26 series - Nesting 1.60.25.1
Plugin Venture 107 1.60.25.1
Plugin Venture 108 1.60.25.2
Plugin Venture 1M 1.60.25.2
Plugin Venture 22L 1.60.25.1
Plugin Venture 230M 1.60.25.2
Plugin Venture 2M 1.60.25.2
Plugin Venture 316 1.60.25.2
Plugin Venture 3M 1.60.25.2
Plugin Venture 8M 1.60.25.2
Plugin Venture BMG 300 1.60.25.2
Plugin Vetor Opus 1.60.25.1
Plugin Vitap Point K2 1.60.25.1
Plugin Weeke BHC280 1.60.25.1
Plugin Weeke BHT500 1.60.25.1
Plugin Weeke Optimat BHC250 1.60.25.1
Plugin WIBJ5 1.60.25.1
Plugin WPS Optimizer 1.60.25.2
Plugin X200 CELL - Nesting 1.60.25.1

Enhancements

Promob ERP

1. The option to export DTOs to the Promob ERP integrator has been created. Learn more here.

Cutting Plan

1. Added the option to Generate non-optimized part lists in the Cutting Plan within the Promob cutting engine settings. Learn more here.

Machine Programs

1. The option to separate entry and exit operations in machining has been implemented when the option is selected. It is also possible to choose whether the machining should start from the middle of the operation. Learn more here. (2094758)

Plugin Starwood PT6

1. The Starwood PT6 plugin now supports the .xml format, compatible with Nanxing software. (2130357) Learn more here.

Plugin Rover 1532

1. The Rover 1532 Plugin can now perform rectangular machining on the profile.

Plugin BHX050

1. The BHX050 plugin has been migrated to cloud-based generation. (2146160)

Plugin G2/G3 Genesis Evo

1. The Giben G2/G3 Genesis Nesting Plugin no longer generates the contour operation (milling), only generating the contour lines when the Plugin integration is Delta.

New Machine Plugins

1. Added a new machine plugin, Alca AL2030M ATC Weihong Router Plugin.

2. Added a new machine plugin, Giben Flexdrill MAX. Learn more here.

Corrections

Builder Tab

1. Fixed the issue where the edge structure was not saved after closing Promob. (2125626)

Plugin Express920

1. Fixed the issue where the machining operations from the Express 920 plugin were duplicated in the machine program. (2136031)

Machine Setup

1. Fixed the issue where some machine plugins, even with the setup activated, were not displayed as active in the Machine Programs menu for program generation.

Plugins Profit H08 e H80

1. Fixed the Nesting File fields for the Profit H08 and H80 machines. (2155035)

Plugin IF 8500

1. Fixed the issue where a discrepancy was displayed when generating a program with a groove for the IF-8500 machine when using a saw. (2157218)

Edge Banding Registration

1. During the registration and editing of edge banding through the Builder tab, a discrepancy will be displayed if the edge cannot be saved due to a registration error.

Plugin Pratika 1000

1. Fixed the issue where the screen for selecting machining or groove tools by process was not displayed. (2155250)

Cutting Plan

1. Fixed the issue where smaller parts were not displayed in the cutting plan.

Plugin FlexDrill 6 1200 Pro

1. Fixed the issue where programs created using the lower head were generated with the tool's name.

Plugin G2/G3 Genesis Evo

1. Removed the option to Generate contour only on irregular parts in the Giben G2/G3 Genesis Nesting Plugin. (2123077)

Plugin INMES IF-8500

1. Fixed the issue of incorrect inversion in the position of the edge banding. (2141832 and 2145719)

▼ 1.60.25.1

Date: 09/06/2024

Released Plugins

Plugin ABL 210 - B: 1.60.25.1
Plugin Alca AL1200D: 1.60.25.1
Plugin Ardis Cutting Optimizer: 1.60.25.1
Plugin BHX055: 1.60.25.1
Plugin BHX500: 1.60.25.1
Plugin Biesse Rover 22: 1.60.25.1
Plugin Biesse Rover AS 15: 1.60.25.1
Plugin Bkrick CR 2130 ATC Syntec Nesting: 1.60.25.1
Plugin Boole Opticut Optimizer: 1.60.25.1
Plugin Brema EKO 2.1 - Drilling Center: 1.60.25.1
Plugin Builder: 1.60.25.1
Plugin Builder Budget: 1.60.25.1
Plugin Builder Catalog: 1.60.25.1
Plugin Builder Parts: 1.60.25.1
Plugin Builder Xml: 1.60.25.1
Plugin CMS Maxima 24B: 1.60.25.1
Plugin Corte Certo: 1.60.25.1
Plugin CRS Exata Vertical 1000 - Drilling Center: 1.60.25.1
Plugin Cut List: 1.60.25.1
Plugin Cut Planning: 1.60.25.1
Plugin Cut Pro: 1.60.25.1
Plugin Cut Rite: 1.60.25.1
Plugin Cyflex HP - CX200: 1.60.25.1
Plugin Cyflex S e SR: 1.60.25.1
Plugin DRILLTEQ H-308: 1.60.25.1
Plugin ERP Focco: 1.60.25.1
Plugin ERP Insight: 1.60.25.1
Plugin ERP Promob: 1.60.25.1
Plugin ERP Standard: 1.60.25.1
Plugin ERP WPS: 1.60.25.1
Plugin Evolution 7405: 1.60.25.1
Plugin Excitech E4-2128D OSAI Nesting: 1.60.25.1
Plugin Excitech E42128D Nesting: 1.60.25.1
Plugin Excitech EHSW1228: 1.60.25.1
Plugin Flexdrill 1000: 1.60.25.1
Plugin Format4 Profit H80: 1.60.25.1
Plugin G2-G3 Genesis Nesting: 1.60.25.1
Plugin Giben G4 Evo Nesting: 1.60.25.1
Plugin GPlan: 1.60.25.1
Plugin Holzer HHOS Optimizer Cut: 1.60.25.1
Plugin Holzher Evolution 7401-7402: 1.60.25.1
Plugin IMA BIMA: 1.60.25.1
Plugin IMA Imagic: 1.60.25.1
Plugin Integração Promob ERP Start: 1.60.25.1
Plugin Lepton Optimizer: 1.60.25.1
Plugin Mobitek SKI612 - Drilling Center: 1.60.25.1
Plugin Morbidelli M100: 1.60.25.1
Plugin Morbidelli P800: 1.60.25.1
Plugin Nanxing NCG3021L Nesting: 1.60.25.1
Plugin OptiPlanning: 1.60.25.1
Plugin Ottimo-Perfect Cut: 1.60.25.1
Plugin Router Aspan: 1.60.25.1
Plugin Router EnRouter CNC: 1.60.25.1
Plugin Rover A 1332: 1.60.25.1
Plugin Rover A 1532: 1.60.25.1
Plugin Rover A 1542: 1.60.25.1
Plugin Rover A 1625-1632-1643-1659: 1.60.25.1
Plugin Rover A 3.30: 1.60.25.1
Plugin SARTWOOD PT6: 1.60.25.1
Plugin SCM Pratika 1000: 1.60.25.1
Plugin Skipper 100: 1.60.25.1
Plugin Skipper 130: 1.60.25.1
Plugin SOPH MSZ600: 1.60.25.1
Plugin Speedy Factory: 1.60.25.1
Plugin Starkend CN9-1828F Syntec Nesting: 1.60.25.1
Plugin Startech: 1.60.25.1
Plugin Usikraft Smart DSP A11 Router: 1.60.25.1
Plugin Venture 108: 1.60.25.1
Plugin Venture 1M: 1.60.25.1
Plugin Venture 230M: 1.60.25.1
Plugin Venture 2M: 1.60.25.1
Plugin Venture 316: 1.60.25.1
Plugin Venture 3M: 1.60.25.1
Plugin Venture 8M: 1.60.25.1
Plugin Venture BMG 300: 1.60.25.1
Plugin WPS Optimizer: 1.60.25.1

Enhancements

Label Configuration

1. Added a new option to show or hide the identifier field on labels. For more information, click aqui.

Builder

1. Added the possibility of opening Promob with Builder plugins in offline mode. When this happens, the Builder plugins are not loaded and a message is displayed. In addition, validations have been implemented when opening Promob to check the user's login. If any inconformity is detected, a message will be displayed and the Builder plugins will not be loaded either. (2133410)

File Generation

1. Added validations so that if the label is not linked to the CNC machine, integrator or optimizer, a message is displayed informing that the files of the corresponding plugins will not be generated.

New Machine plugin

1. Added a new machine plugin, Plugin Rover AS 15. For more information, click here.

2. Added a new machine plugin, Plugin Brema EKO 2.1. For more information, click here.

3. Added a new machine plugin, Plugin DrillTeq H-308. For more information, click here.

4. Added a new machine plugin, Plugin Bkrick CR 2130 ATC Syntec Nesting.

5. Added a new machine plugin, Plugin Starkend CN9-1828F Syntec Nesting.

6. Added a new machine plugin, Plugin Excitech E4-2128D OSAI Nesting.

7. Added a new machine plugin, Plugin Usikraft Smart DSP A11 Router.

8. Added a new machine plugin, Plugin Mobitek SKI612 - Drilling Center. For more information, click here.

Machine Plugins

1. Renamed the following plugins:

The Genesis Evo Plugin has been renamed the Giben G4 Evo Nesting Plugin.
The Giben KN3710 Nesting plugin has been renamed the Giben G2/G3 Genesis Nesting plugin.

Plugins Nanxing NCB

1. Added option in Nanxing NCB Plugins to change the decimal separator in machine programs and set the number of decimal places. (2145424)

Plugin ERP Standard

1. Added the setting Consider unique name when saving the XML file to the ERP Standard Plugin. (2150891)

Plugin Promob ERP

1. Added a validation when saving the Promob ERP plugin settings. Now, if the option Send XML file to ERP API is checked, the CNPJ field must be filled in. For more information, click here.

Machine Programs

1. Added profile machining operation for Homag machines. (2065649)

Corrections

3D Environment

1. Fixed the display of the edge ribbon for curved items in the 3D environment, which was not displayed correctly. (2129779)

Complete Label Image

1. Fixed the situation where saving did not occur when leaving the full label configuration.

New UI

1. Adjusted the visibility of the Cutting Planes button.

Budget

1. Adjusted the production script creation stage in the budget to ensure compatibility with Promob version 5.60.35.

Plugin Builder XML

1. Fixed the situation where, in the Builder XML plugin, the cutter settings were not aligned with the selected integration system (Builder or Insight).

2. Corrected the situation in which, when generating a program with the plugin that contained a profile machining on the part, an inconformity occurred.

Plugin Profit H80

1. Corrected the situation in which the ProfitH80 machine did not generate slots with the milling. (2133529)

Plugin KN3710

1. Corrected the situation in which the KN3710 machine (G2-G3 Genesis) presented an inconformity when trying to generate programs. (2143467)

Plugin Pratika 325

1. Corrected the situation in the Pratika 325 - Nesting plugin, where some similar parts generated .inf files. (2141723)

Plugin Raizen Solid TAF Router

1. Corrected the situation in which the parts came out dislocated in the nesting of the Raizen Solid TAF Router Plugin. (2145756)

Plugin Giben G2/G3 Genesis Nesting

1. Adjusted the translation of the message displayed when generating the files. (2152626)

Exata Vertical Plugin

1. Corrected the situation in which the Exata Vertical machine did not generate internal machining. (2137891)

Machine Plugins

1. Fixed the situation where Desktops were not being loaded.

2. Corrected the situation in which the CNC machine file item was not displayed.

Publish

1. Fixed the situation where, when publishing the Maker libraries with Builder plugins, an inconformity occurred in Promob.

Processes

1. Fixed the situation where editing the name of a case resulted in the record being deleted from the database. (2153981)

2. Implemented a message when opening Promob to inform which processes may not be available for configuration.

▼ 1.60.25.0

Date: 22/08/2024

Enhancements

Generating labels

1. Label generation is now online and an exclusive menu has been created for registration called Label Editor. It is now possible to register several labels per CNC machine, integrator and/or cutting optimizer, with all the images and complete labels stored in the cloud. In addition, a new feature has been added to link these labels to CNC machines, integrators and/or optimizers. Find out more here.

Corrections

Label generation

1. Fixed situation in which the configuration of the label sheet was not taken into account in the generated pdf.

▼ 1.60.24.1

Date: 08/07/2024

Released Plugins

Plugin Alca AL2030F ATC Weihong Nesting - 1.60.24.1
Plugin Boole Opticut Optimizer - 1.60.24.1
Plugin Builder - 1.60.24.1
Plugin Builder Budget - 1.60.24.1
Plugin Builder Catalog - 1.60.24.1
Plugin Builder Parts - 1.60.24.1
Plugin Builder XML - 1.60.24.1
Plugin CMS MAXIMA 24 MB - Glass Machine - 1.60.24.1
Plugin Cut Planning - 1.60.24.1
Plugin Cut Pro - 1.60.24.1
Plugin CutRite - 1.60.24.1
Plugin Cutting List - 1.60.24.1
Plugin Dynestic 7516 - 1.60.24.1
Plugin Emmegi Soft STD - Aluminum - 1.60.24.1
Plugin ERP Focco - 1.60.24.1
Plugin ERP Insight - 1.60.24.1
Plugin ERP Neopoint Speedy Factory - 1.60.24.1
Plugin ERP Promob - 1.60.24.1
Plugin ERP Promob Start - 1.60.24.1
Plugin ERP Standard - 1.60.24.1
Plugin ERP WPS - 1.60.24.1
Plugin Etools Start Max ATC 10 Weihong Router - 1.60.24.1
Plugin Felder Creator 950 - 1.60.24.1
Plugin Giben Flexdrill 6 - 1200 - 1.60.24.1
Plugin Giben Flexdrill 6 1000 Evo - 1.60.24.1
Plugin Giben G2/G3 Genesis Nesting - 1.60.24.1
Plugin GPlan - 1.60.24.1
Plugin Holzer HHOS Optimizer Cut - 1.60.24.1
Plugin Homag/Weeke ABL210 B - 1.60.24.1
Plugin IMA BIMA - 1.60.24.1
Plugin IMA Imagic - 1.60.24.1
Plugin INMES IF-8500 - 1.60.24.1
Plugin Jaragua Solid TAF 2818 Eding CNC Router - 1.60.24.1
Plugin KDT KN 2409NL LNC Router - 1.60.24.1
Plugin Mach Elite 3020 Mach3 2S Router - 1.60.24.1
Plugin Morbidelli Cyflex HP – CX200 - 1.60.24.1
Plugin Morbidelli Cyflex S e Sr - 1.60.24.1
Plugin Morbidelli M100 - 1.60.24.1
Plugin Morbidelli P800 - 1.60.24.1
Plugin OptiPlanning - 1.60.24.1
Plugin Ottimo-Perfect Cut - 1.60.24.1
Plugin Raizen Vision One TAF Syntec Router - 1.60.24.1
Plugin Router Aspan - 1.60.24.1
Plugin Router EnRoute CNC - 1.60.24.1
Plugin SCM Pratika 1000 - 1.60.24.1
Plugin Skipper 100 - 1.60.24.1
Plugin Skipper 130 - 1.60.24.1
Plugin WPS Optimizer - 1.60.24.1

Enhancements

Integration with Promob ERP

1. A new setting has been created for entering the Manufacturer's url in order to use the Focco API. Find out more here.

Creator 950

1. Created the option to change the OPTIKIND optimization type parameter for the Creator 950 plugin. Find out more here. (2081296)

New machine plugin

1. Added a new machine plugin, Emmegi Soft STD - Aluminum.

2. Added a new machine plugin, Jaragua Solid TAF 2818 Eding CNC Router.

3. Added a new machine plugin, Etools Start Max ATC 10 Weihong Router.

4. Added a new machine plugin, Mach Elite 3020 Mach3 2S Router.

5. Added a new machine plugin, Plugin Raizen Vision One TAF Syntec Router.

6. Added a new machine plugin, Plugin KDT KN 2409NL LNC Router.

Machine Programs

1. Added MD command in machine programs with MPR format to drill holes in several passes. Find out more here.

Corrections

Plugin Insight ERP

1. Corrected the situation in which the technical drawing did not properly represent the machining operations when it was generated via the Insight Plugin. (2121056)

Builder

1. Fixed the situation where dynamic machining was not generated on inclined parts. (2123134)

Plugin Inmes IF-8500

1. Corrected situation in which a bridge was not created for parts with corner machining, resulting in the part falling into the machine. (2129626)

2. Corrected situation in which unconformity was generated when generating integration in parts with Arcs. (2135883)

3. Corrected the situation in which a contour was generated on the part improperly because this machine does not generate part contours. (2132525)

4. Corrected situation in which a unconformity was generated when generating rectangular part programs. (2138775)

5. Fixed the situation in which the edge band s did not take into account the direction of the generated program. (2127049)

6. Corrected situation in the INMES IF-8500 Plugin where the value of the setting Minimum position of the center of the side holes in (Y) was not taken into account. (2130746)

7. Corrected the situation in which the INMES IF-8500 Plugin generated the machine program with the incorrect slot position and the configured Order of Operations was not taken into account. (2131568)

FlexDrill 61200 e flexdrill 61000

1. Corrected situation in which a unconformity was displayed when generating the integration with the Flexdrill 61200 plugin. (2132538)

Builder Parts

1. Fixed the situation where edge tapes were not displayed in the 3D environment when generated by Plugin Builder Parts. (2129205)

2. Fixed situation where Builder Parts made from library items did not maintain the same hardware positioning. (1989694)

3. Corrected the situation in which unconformity occurred when adding edge band where there is already a tape applied.

Giben KN3710

1. Corrected the situation where the direction of the vein was not considered as it was in the 3D environment. (2129878)

ABL 210B

1. Corrected a situation in which the GLA 210B programs did not contain the suction cup positioning command. (2132313)

Machine setup

1. Corrected a situation in which, when cloning a setup, the code was cloned together and thus caused a problem when generating two setups simultaneously. (2121700, 2126928).

2. Corrected the description of the Generate program even empty field for the Giben KN3710 and Nanxing NCG3021L plugins.

Quotas

1. Corrected situation in which the quota value of BuilderParts parts showed a value less than zero. (2133273)

Machine Programs

1. Adjusted the display of machining operations in the programs generated by the Skipper 100 and 130 machines. (2120975)

2. Adding a restriction so that holes above a certain value entered in the CNC settings cannot be output in the program. (2121453)

3. Improvements made to optimize time in generating machine programs (2121605)

Plugin ISO Code

1. Fixed the situation where, when generating ISO Code integration, it was necessary to select the save directory twice.

ERP Integration

1. Corrected the situation in which the non-conformity path too long occurred when generating integration with Todeschini. (2131543)

2. Fixed slowness when generating ERP integration in configurations with several machine set-ups (2144701)

Material Registration

1. Corrected the situation where, when generating machine files, it was possible to access the Material Register even with the Builder View plugin deactivated.

2. Corrected the situation where the material registration screen did not display all the materials registered.

▼ 1.60.24.0

Date: 22/07/2024

Released Plugins

Plugin ABL 210 - B - 1.60.24.0
Plugin Accord 40 FX - 1.60.24.0
Plugin AES Extreme Ultra Router - 1.60.24.0
Plugin AES Go 1300 - 1.60.24.0
Plugin Alca AL1200D - 1.60.24.0
Plugin Alca Machine Router AL2030 3S - 1.60.24.0
Plugin Alca Machine Router AL2030 ATC - 1.60.24.0
Plugin Alca Maquinas AL2030B - 1.60.24.0
Plugin Application of laminates per module report - 1.60.24.0
Plugin Ardis Cutting Optimizer - 1.60.24.0
Plugin Asia Robotica CN1325 ATC Router - 1.60.24.0
Plugin Assembly Report - 1.60.24.0
Plugin Assembly Steel Report - 1.60.24.0
Plugin Author200 - 1.60.24.0
Plugin Author327 - 1.60.24.0
Plugin Author436S - 1.60.24.0
Plugin Author500 - 1.60.24.0
Plugin AuthorM600 - 1.60.24.0
Plugin BHX050 - 1.60.24.0
Plugin BHX055 - 1.60.24.0
Plugin BHX500 - 1.60.24.0
Plugin Biesse Comil Insider FT2 - 1.60.24.0
Plugin Biesse EKO 902 - 1.60.24.0
Plugin Biesse FTT - 1.60.24.0
Plugin Biesse Rover 22 - 1.60.24.0
Plugin Biesse Rover 24 - 1.60.24.0
Plugin Biesse Rover A4 - 1.60.24.0
Plugin Biesse Rover B7 - 1.60.24.0
Plugin Biesse Skill 300 K3 - 1.60.24.0
Plugin BMG110 - Venture 113-114-115 - 1.60.24.0
Plugin Boole Opticut Optimizer - 1.60.24.0
Plugin BP 195T - 1.60.24.0
Plugin Builder - 1.60.24.0
Plugin Builder Budget - 1.60.24.0
Plugin Builder Catalog - 1.60.24.0
Plugin Builder Parts - 1.60.24.0
Plugin Builder View - 1.60.24.0
Plugin Builder Xml - 1.60.24.0
Plugin Buselatto Jet Optima A20-C20-C21 - 1.60.24.0
Plugin C-Express 920 - 1.60.24.0
Plugin CMS Maxima 24B - 1.60.24.0
Plugin Composed Panel Report - 1.60.24.0
Plugin Corte Certo - 1.60.24.0
Plugin CRS Exata Horizontal - Drilling Center - 1.60.24.0
Plugin CRS Exata Vertical 1000 - Drilling Center - 1.60.24.0
Plugin CRS Exata Vertical 1200 - Drilling Center - 1.60.24.0
Plugin Cut List - 1.60.24.0
Plugin Cut Planning - 1.60.24.0
Plugin Cut Pro - 1.60.24.0
Plugin Cut Rite - 1.60.24.0
Plugin CVL Syntec Router - 1.60.24.0
Plugin Cyflex 900 - 1.60.24.0
Plugin Cyflex 900BR - 1.60.24.0
Plugin Cyflex H800 - 1.60.24.0
Plugin Cyflex HP - CX200 - 1.60.24.0
Plugin Cyflex S e SR - 1.60.24.0
Plugin Delta D3020 Mach3 Router - 1.60.24.0
Plugin Door Report - 1.60.24.0
Plugin Drawer Report - 1.60.24.0
Plugin DRILLTEQ V-200 - 1.60.24.0
Plugin Dynestic 7516 - 1.60.24.0
Plugin Easy Jet - 1.60.24.0
Plugin Easynest 3018 A - 1.60.24.0
Plugin Easynest 3021 - 1.60.24.0
Plugin Easynest 4021 - 1.60.24.0
Plugin Edge Band Report - 1.60.24.0
Plugin ERP Focco - 1.60.24.0
Plugin ERP Insight - 1.60.24.0
Plugin ERP Promob - 1.60.24.0
Plugin ERP Standard - 1.60.24.0
Plugin ERP WPS - 1.60.24.0
Plugin ETools Pro ATC 12 2030 Router - 1.60.24.0
Plugin ETools Pro Max Syntech 60CA Router - 1.60.24.0
Plugin Evolution 7405 - 1.60.24.0
Plugin Excitech E42128D Nesting - 1.60.24.0
Plugin Excitech EHSW1228 - 1.60.24.0
Plugin F9L - 1.60.24.0
Plugin Felder Creator 950 - 1.60.24.0
Plugin Flexdrill 1000 - 1.60.24.0
Plugin Flexdrill 1200 - 1.60.24.0
Plugin Flexdrill 612 KS - 1.60.24.0
Plugin Flexdrill 612 M - 1.60.24.0
Plugin Flexdrill 61200 - 1.60.24.0
Plugin Format4 Profit H08 - 1.60.24.0
Plugin Format4 Profit H20-H22-H22L - 1.60.24.0
Plugin Format4 Profit H80 - 1.60.24.0
Plugin Giben Flat (BDT - Spectra) - 1.60.24.0
Plugin Giben Flat (Selexx - Professional Line - Stratos) - 1.60.24.0
Plugin Giben Flexdrill 6 1000 Evo - 1.60.24.0
Plugin Giben Flexdrill 6 1200 Pro - 1.60.24.0
Plugin Giben Genesis EVO - 1.60.24.0
Plugin GPlan - 1.60.24.0
Plugin HG 2030 Master - 1.60.24.0
Plugin Hirzt F10 - 1.60.24.0
Plugin Hirzt F6 - 1.60.24.0
Plugin Hirzt F8 - 1.60.24.0
Plugin Holzer HHOS Optimizer Cut - 1.60.24.0
Plugin Holzher Evolution 7401-7402 - 1.60.24.0
Plugin Holzher Master - 1.60.24.0
Plugin Homag Weeke ABD 100 - 1.60.24.0
Plugin Homag Weeke ABD 250 - 1.60.24.0
Plugin HuaHua SKH612 - 1.60.24.0
Plugin IF-850 Plus - 1.60.24.0
Plugin IF-8500 - 1.60.24.0
Plugin IMA BIMA - 1.60.24.0
Plugin IMA Imagic - 1.60.24.0
Plugin Inmes IN-100K - Nesting NK300CX Router - 1.60.24.0
Plugin Integração Promob ERP Start - 1.60.24.0
Plugin ISO Code - 1.60.24.0
Plugin Jaragua CNC Mobile Router 2818 - 1.60.24.0
Plugin Jaragua CNC Mobile TAF Router - 1.60.24.0
Plugin Jaragua CNC TAURUS 2818 - 1.60.24.0
Plugin Jaragua Compact EdingCNC Router - 1.60.24.0
Plugin Jaragua Vision TAF Router - 1.60.24.0
Plugin JaraguaCNC Router Exclusive 28182 - 1.60.24.0
Plugin JaraguaCNC Solid - 1.60.24.0
Plugin JaraguaCNC Vision - 1.60.24.0
Plugin Klipper RSL Taiwan Baoyuan Router - 1.60.24.0
Plugin KN3710 Nesting - 1.60.24.0
Plugin Lepton Optimizer - 1.60.24.0
Plugin M400F - 1.60.24.0
Plugin Mach CNC MACHPRO ATC - 1.60.24.0
Plugin Mach CNC Router Elite Super Drill 2819 - 1.60.24.0
Plugin Mach Commander NC Studio Router - 1.60.24.0
Plugin Mach Pro Turbo DDCS Expert Router - 1.60.24.0
Plugin Mach Pro Turbo Duo DDCS Expert Router - 1.60.24.0
Plugin Mach Turbo DNA DDCS Expert Router - 1.60.24.0
Plugin Mach Turbo Duo DNA Weihong Router - 1.60.24.0
Plugin Mak CNC Titan Agile DDCS Router - 1.60.24.0
Plugin Mak Pro 3000 Mach3 Router - 1.60.24.0
Plugin Manufacturing Cabinet Report - 1.60.24.0
Plugin Manufacturing Component Report - 1.60.24.0
Plugin Marchiori ATC2030 Weihong Router - 1.60.24.0
Plugin Marchiori LD 3000 Mach3 Router - 1.60.24.0
Plugin Master Drill TF 500 - 1.60.24.0
Plugin Masterwood Nesting MW - 1.60.24.0
Plugin MasterWood Project 415 - 1.60.24.0
Plugin MasterWood Project 465 - 1.60.24.0
Plugin Morbidelli M100 - 1.60.24.0
Plugin Morbidelli P800 - 1.60.24.0
Plugin Morbidelli UX100 - 1.60.24.0
Plugin Nanxing NCB2412 - 1.60.24.0
Plugin Nanxing NCB612 - 1.60.24.0
Plugin Nanxing NCG3021L Nesting - 1.60.24.0
Plugin OMNICNC 1325 Router - 1.60.24.0
Plugin OptiPlanning - 1.60.24.0
Plugin Ottimo-Perfect Cut - 1.60.24.0
Plugin Point 2 - 1.60.24.0
Plugin Pratika 280 - 1.60.24.0
Plugin Pratika 310 - 1.60.24.0
Plugin Pratika 315 - 1.60.24.0
Plugin Pratika 320 - 1.60.24.0
Plugin Pratika 325 - 1.60.24.0
Plugin PratixS - 1.60.24.0
Plugin Profile Report - 1.60.24.0
Plugin Project 250 - 1.60.24.0
Plugin Project 450 - 1.60.24.0
Plugin Project TF - 1.60.24.0
Plugin PTP - 1.60.24.0
Plugin PTP 160 - 1.60.24.0
Plugin Puchased Item Report - 1.60.24.0
Plugin Raizen Bravus Syntec Router - 1.60.24.0
Plugin Raizen Solid DSP Router - 1.60.24.0
Plugin Raizen Solid TAF Router - 1.60.24.0
Plugin Raizen Vision Plus Syntec Router - 1.60.24.0
Plugin Raizen Vision TAF Router - 1.60.24.0
Plugin Rhino RMC 3000 Absolute ATC Mach3 Router - 1.60.24.0
Plugin Rhino RMC 3000 Absolute Mach3 Router - 1.60.24.0
Plugin Rhino RMC 3000 Plus DDCS Router - 1.60.24.0
Plugin Router Aspan - 1.60.24.0
Plugin Router EnRouter CNC - 1.60.24.0
Plugin Rover A 1332 - 1.60.24.0
Plugin Rover A 1532 - 1.60.24.0
Plugin Rover A 1542 - 1.60.24.0
Plugin Rover A 1625-1632-1643-1659 - 1.60.24.0
Plugin Rover A 3.30 - 1.60.24.0
Plugin Rover C9 - 1.60.24.0
Plugin Rover K FT 1531 - 1.60.24.0
Plugin Rover1836GFT - 1.60.24.0
Plugin Rover20 - 1.60.24.0
Plugin Rover2231GFT - 1.60.24.0
Plugin SARTWOOD PT6 - 1.60.24.0
Plugin SCM Pratika 1000 - 1.60.24.0
Plugin SCM Startech cn plus - 1.60.24.0
Plugin SCM Startech cn v - 1.60.24.0
Plugin Sideco SIR 1325 ATC Router - 1.60.24.0
Plugin Skipper 100 - 1.60.24.0
Plugin Skipper 130 - 1.60.24.0
Plugin Skipper V31 - 1.60.24.0
Plugin SOPH MSZ600 - 1.60.24.0
Plugin Spazio3D - 1.60.24.0
Plugin Speedy Factory - 1.60.24.0
Plugin Startech - 1.60.24.0
Plugin Tech 99L - 1.60.24.0
Plugin Tech Z1 - 1.60.24.0
Plugin Tech Z2 - 1.60.24.0
Plugin Tech Z25 - 1.60.24.0
Plugin Tech Z30 - 1.60.24.0
Plugin Tech Z5 - 1.60.24.0
Plugin TekMaq 3020 Mach2 Router - 1.60.24.0
Plugin Twister750NX - 1.60.24.0
Plugin Uniflex - 1.60.24.0
Plugin Universal NB-3618 - 1.60.24.0
Plugin Universal NB-3622 - 1.60.24.0
Plugin Universal TV 3615 - 1.60.24.0
Plugin Usaberg ATC 2819 Router - 1.60.24.0
Plugin Usikraft Discovery ATC Router - 1.60.24.0
Plugin Usikraft Evoque 2030 ATC Router - 1.60.24.0
Plugin Vantage 24-25-26 series - Nesting - 1.60.24.0
Plugin Venture 107 - 1.60.24.0
Plugin Venture 108 - 1.60.24.0
Plugin Venture 1M - 1.60.24.0
Plugin Venture 22L - 1.60.24.0
Plugin Venture 230M - 1.60.24.0
Plugin Venture 2M - 1.60.24.0
Plugin Venture 316 - 1.60.24.0
Plugin Venture 3M - 1.60.24.0
Plugin Venture 8M - 1.60.24.0
Plugin Venture BMG 300 - 1.60.24.0
Plugin Vetor Opus - 1.60.24.0
Plugin Vitap Point K2 - 1.60.24.0
Plugin Warehouse Report - 1.60.24.0
Plugin Weeke BHC280 - 1.60.24.0
Plugin Weeke BHT500 - 1.60.24.0
Plugin Weeke Optimat BHC250 - 1.60.24.0
Plugin WIBJ5 - 1.60.24.0
Plugin WPS Optimizer - 1.60.24.0
Plugin X200 CELL - Nesting - 1.60.24.0

Enhancements

Compatibility

1. Compatibility with New Promob, starting from Promob version 5.60.34.0.

New Plugins - Manufacturer Mach

1. Added Mach Turbo DNA DDCS Expert Router plugin for machines.

2. Added Mach Turbo Duo DNA Weihong Router plugin for machines.

New Plugins - Manufacturer Mak

1. Added Mak CNC Titan Agile DDCS Router plugin for machines.

New Plugins - Manufacturer Marchiori

1. Added Marchiori ATC2030 Weihong Router plugin for machines.

New Plugins - Manufacturer Inmes

1. Added Inmes IN-100K - Nesting Weihong NK300CX Router plugin for machines.

▼ 1.60.23.2

Date: 06/20/2024

Released Plugins

Plugin ABL 210 - B - 1.60.23.2
Plugin Alca AL1200D - 1.60.23.2
Plugin BHX055 - 1.60.23.2
Plugin BHX500 - 1.60.23.2
Plugin Biesse Rover 22 - 1.60.23.2
Plugin Builder - 1.60.23.2
Plugin Builder Budget - 1.60.23.2
Plugin Builder Parts - 1.60.23.2
Plugin Builder Xml - 1.60.23.2
Plugin CMS Maxima 24B - 1.60.23.2
Plugin Cut Pro - 1.60.23.2
Plugin Cyflex HP - CX200 - 1.60.23.2
Plugin Cyflex S e SR - 1.60.23.2
Plugin ERP Focco - 1.60.23.2
Plugin ERP Insight - 1.60.23.2
Plugin ERP Promob - 1.60.23.2
Plugin ERP Standard - 1.60.23.2
Plugin ERP WPS - 1.60.23.2
Plugin ETools Pro Max Syntech 60CA Router - 1.60.23.2
Plugin Evolution 7405 - 1.60.23.2
Plugin Excitech E42128D Nesting - 1.60.23.2
Plugin Excitech EHSW1228 - 1.60.23.2
Plugin Flexdrill 1000 - 1.60.23.2
Plugin Flexdrill 61200 - 1.60.23.2
Plugin Format4 Profit H08 - 1.60.23.2
Plugin Format4 Profit H80 - 1.60.23.2
Plugin Holzher Evolution 7401-7402 - 1.60.23.2
Plugin IMA BIMA - 1.60.23.2
Plugin IMA Imagic - 1.60.23.2
Plugin Integração Promob ERP Start - 1.60.23.2
Plugin ISO Code - 1.60.23.2
Plugin Jaragua Vision TAF Router - 1.60.23.2
Plugin JaraguaCNC Vision - 1.60.23.2
Plugin KN3710 Nesting - 1.60.23.2
Plugin Morbidelli M100 - 1.60.23.2
Plugin Morbidelli P800 - 1.60.23.2
Plugin Nanxing NCB2412 - 1.60.23.2
Plugin Nanxing NCB612 - 1.60.23.2
Plugin Nanxing NCG3021L Nesting - 1.60.23.2
Plugin Router Aspan - 1.60.23.2
Plugin Router EnRouter CNC - 1.60.23.2
Plugin Rover A 1332 - 1.60.23.2
Plugin Rover A 1532 - 1.60.23.2
Plugin Rover A 1542 - 1.60.23.2
Plugin Rover A 1625-1632-1643-1659 - 1.60.23.2
Plugin Rover A 3.30 - 1.60.23.2
Plugin SARTWOOD PT6 - 1.60.23.2
Plugin SCM Pratika 1000 - 1.60.23.2
Plugin Skipper 100 - 1.60.23.2
Plugin Skipper 130 - 1.60.23.2
Plugin SOPH MSZ600 - 1.60.23.2
Plugin Speedy Factory - 1.60.23.2
Plugin Startech - 1.60.23.2
Plugin Venture 108 - 1.60.23.2
Plugin Venture 1M - 1.60.23.2
Plugin Venture 230M - 1.60.23.2
Plugin Venture 2M - 1.60.23.2
Plugin Venture 316 - 1.60.23.2
Plugin Venture 3M - 1.60.23.2
Plugin Venture 8M - 1.60.23.2
Plugin Venture BMG 300 - 1.60.23.2

Enhancements

Importing Materials

1. Implemented functionality allowing the import of materials in Plugin settings. For more information, click here (2032693)

Weeke/Homag Machines

1. Created the option of Percentage of approximation (%) for tears executed with saw using the command 109. This feature is available for the following machines: BHX-055, DRILLTEQ V-200, PTP 160, Venture 1M, Venture 230M, Venture 2M, Venture 316, Venture 8M, Venture BMG 300. (2121608)

Plugin ERP Promob

1. Added in the Promob ERP Plugin, an option to configure sending the XML file generated by the integration to a Focco API. For more information, click here.

1.Configuracao - envio API.png

Plugin Profit H08 and Profit H80

1. Implemented a new integration software format, the .f4g file compatible with ProfitH08 and ProfitH80 machines.

Profit H08.png

Plugins Nanxing - NCB2412, NCB612 and Soph - MSZ600C

1. Available the option to Make Parallel Holes, with the option checked, holes that exceed the thickness of the part when adding up their depths, and which are in the same position on opposite faces, will be combined into a single through operation. This feature is available for the following machines: Nanxing - NCB2412, Nanxing - NCB612, Soph - MSZ600C.

SetupPart2Nanxing - NCB2412.png

Plugin ETools Pro Max Syntech 60CA Router

1. Added the ETools Pro Max Syntech 60CA Router plugin for machines.

Plugin Cyflex HP - CX200

1. Added safety quota option for holes in the Cyflex HP - CX200 machine. For more information, click here. (2070593 and 2102564)

Plugin Giben KN3710

1. Added the option to generate parts without operations for the delta mode of the KN3710 machine. (2119487)

Plugin Starwood PT6

1. Implemented functionality allowing the selection of multiple tools for slotting operations.

Corrections

CNC Configurations (Dynamic Machines)

1. Fixed the situation where new setups were generated in the cloud when using the automatic download option. (2123482)

Cutting Optimizers

1. Fixed the situation that occurred when sending parts with aluminum to the Cutting Optimizers. (2113711)

Plugin Builder Parts

1. Corrected the description of edgeband registration properties in the Builder Parts plugin.

2. Fixed the situation where rectangular machining operations did not display the processes registered in the Builder Parts plugin.

Plugin INMES IF-8500

1. Fixed the situation in which the depth of the holes was incorrect in the programs of the Inmes IF-8500 machine. (2125343)

2. Fixed the situation that generated inverted machining operations on the IF8500 machine with a .PZA file. (2120748)

3. Fixed the situation in which no contour was generated on the parts, even with the option enabled. (2125351)

Plugin CNC Builder XML

1. Adjustments have been made to the visibility of some fields on the Machine Configuration and Machine Tools screen in XML Builder.

Plugin Nanxing NCG3021L

1. The following adjustments were made to the Nanxing NCG3021L plugin: (2121378)

Fixed the situation of incomplete information in the additional data, such as the tag path that was not generated correctly.
Now, operations and their lines have sequential IDs starting from 1 for each operation.
The Diameter information has been added to all operations.
The ToolOffset has been changed to Chinese characters to indicate alignment: Center ("中"), Left ("左"), Right ("右").
The EdgeGroup field was incorporated as a fixture before finalizing the program.
The Pocket field has been removed from all operations.

Plugin Giben Flexdrill 6 - 1200

1. Fixed the situation where the tool size was sent instead of the slot in the Giben Flexdrill 6 - 1200 plugin. (2122870)

Plugin Starwood PT6

1. Fixed the Mirror command in the Starwood PT6 plugin.

Plugin Rover A1532

1. Fixed the situation where the process machining field was not displayed on the Rover A1532 machine. (2121608)

▼ 1.60.23.1

Date: 06/03/2024

Released Plugins

Plugin X200 CELL - Nesting - 1.60.23.1
Plugin Alca AL1200D - 1.60.23.1
Plugin Ardis Cutting Optimizer - 1.60.23.1
Plugin BHX055 - 1.60.23.1
Plugin BHX500 - 1.60.23.1
Plugin Biesse Rover 22 - 1.60.23.1
Plugin Boole Opticut Optimizer - 1.60.23.1
Plugin Builder - 1.60.23.1
Plugin Builder Budget - 1.60.23.1
Plugin Builder Parts - 1.60.23.1
Plugin Builder Xml - 1.60.23.1
Plugin Builder View - 1.60.23.1
Plugin CMS Maxima 24B - 1.60.23.1
Plugin Corte Certo - 1.60.23.1
Plugin Cut List - 1.60.23.1
Plugin Cut Planning - 1.60.23.1
Plugin Cut Pro - 1.60.23.1
Plugin Cut Rite - 1.60.23.1
Plugin Cyflex S e SR - 1.60.23.1
Plugin Dynestic 7516 - 1.60.23.1
Plugin Easy Jet - 1.60.23.1
Plugin Easynest 3018 A - 1.60.23.1
Plugin Easynest 3021 - 1.60.23.1
Plugin Easynest 4021 - 1.60.23.1
Plugin ERP Focco - 1.60.23.1
Plugin ERP Insight - 1.60.23.1
Plugin ERP Promob - 1.60.23.1
Plugin ERP Standard - 1.60.23.1
Plugin ERP WPS - 1.60.23.1
Plugin Evolution 7405 - 1.60.23.1
Plugin Excitech E42128D Nesting - 1.60.23.1
Plugin Excitech EHSW1228 - 1.60.23.1
Plugin Flexdrill 1000 - 1.60.23.1
Plugin Format4 Profit H08 - 1.60.23.1
Plugin Format4 Profit H80 - 1.60.23.1
Plugin Giben Flat (BDT - Spectra) - 1.60.23.1
Plugin Giben Flat (Selexx - Professional Line - Stratos) - 1.60.23.1
Plugin Giben Genesis EVO - 1.60.23.1
Plugin GPlan - 1.60.23.1
Plugin Holzer HHOS Optimizer Cut - 1.60.23.1
Plugin Holzher Evolution 7401-7402 - 1.60.23.1
Plugin IMA BIMA - 1.60.23.1
Plugin IMA Imagic - 1.60.23.1
Plugin Integração Promob ERP Start - 1.60.23.1
Plugin Integração Promob Production - 1.60.23.1
Plugin KN3710 Nesting - 1.60.23.1
Plugin Lepton Optimizer - 1.60.23.1
Plugin M400F - 1.60.23.1
Plugin Masterwood Nesting MW - 1.60.23.1
Plugin Morbidelli M100 - 1.60.23.1
Plugin Morbidelli P800 - 1.60.23.1
Plugin Nanxing NCG3021L Nesting - 1.60.23.1
Plugin OptiPlanning - 1.60.23.1
Plugin Ottimo-Perfect Cut - 1.60.23.1
Plugin Pratika 280 - 1.60.23.1
Plugin Pratika 320 - 1.60.23.1
Plugin Pratika 325 - 1.60.23.1
Plugin PratixS - 1.60.23.1
Plugin Router Aspan - 1.60.23.1
Plugin Router EnRouter CNC - 1.60.23.1
Plugin Rover A 3.30 - 1.60.23.1
Plugin Rover A 1332 - 1.60.23.1
Plugin Rover A 1532 - 1.60.23.1
Plugin Rover A 1542 - 1.60.23.1
Plugin Rover A 1625-1632-1643-1659 - 1.60.23.1
Plugin Rover K FT 1531 - 1.60.23.1
Plugin Rover1836GFT - 1.60.23.1
Plugin Rover2231GFT - 1.60.23.1
Plugin SARTWOOD PT6 - 1.60.23.1
Plugin SCM Pratika 1000 - 1.60.23.1
Plugin Skipper 100 - 1.60.23.1
Plugin Skipper 130 - 1.60.23.1
Plugin SOPH MSZ600 - 1.60.23.1
Plugin Spazio3D - 1.60.23.1
Plugin Speedy Factory - 1.60.23.1
Plugin Startech - 1.60.23.1
Plugin Universal NB-3618 - 1.60.23.1
Plugin Universal NB-3622 - 1.60.23.1
Plugin Venture 1M - 1.60.23.1
Plugin Venture 2M - 1.60.23.1
Plugin Venture 3M - 1.60.23.1
Plugin Venture 8M - 1.60.23.1
Plugin Venture 108 - 1.60.23.1
Plugin Venture 230M - 1.60.23.1
Plugin Venture 316 - 1.60.23.1
Plugin Venture BMG 300 - 1.60.23.1
Plugin Vetor Opus - 1.60.23.1
Plugin WPS Optimizer - 1.60.23.1

Enhancements

Labels

1. Added a simplified option to display the Alignment Face in the label image. For more information, click here and here.

release etiquetas 23.1 US.png

Maker

1. Implemented improved machine association process. Now, it is no longer necessary to associate machines to Maker libraries.

Plugin Builder

1. Implemented improvements in the operations processes (slots and machining) registered in the Catalog Tab Builder and Plugin Builder Parts. Now, such processes are saved in the cloud and shared in all Promobs that use the same library.

Plugin Morbidelli UX100

1. Implemented the desktop configuration and definition screen for the Morbidelli UX100 plugin.

Giben FlexDrilll 1200 Pro Plugin

1. Added the Giben FlexDrill 1200 Pro plugin for machines. For more information, click here.

Corrections

3D Space

1. Fixed the absence of edge band in the Space 3D when a word other than EDGE was used in the edge layer. (2095273)

Register of Builder’s Materials

1. Fixed the situation where the Builder Materials Register remained visible in the menu even with the plugin disabled.

CNC Configurations

1. Corrected the English translation of the CNC Configurations.

2. Checked, the CNC settings that presented lock.

Technical Drawing

1. Fixed the situation where the Technical Drawing settings remained visible in the menu even when the plugin was disabled.

Tools

1. Corrected the situation in which a non-existent slot was generated in a part. (2096868)

Builder Parts

1. Fixed the English translation of edge band properties in Builder Parts.

XML Builder

1. Fixed the situation where two machining commands were generated for the XML Builder instead of one. (2114077)

2. Fixed the situation where the Z value for machining on the bottom face was not set correctly with the XML Builder.

Machine Programs

1. Adjusts the difference in depths for in-line machining when the depth is variable. (2110844)

ERP Plugins - Promob

1. Corrected the situation in which an inconformity was displayed when applying XSL. (2116259)

Plugins Giben FlexDrill 6 1000 and 1200

1. Corrected the situation in which path operations were not executed in the lower head, generating program B. (2107553)

IF-8500 Plugin

1. Corrected the situation in which the channel was positioned in a way that was incompatible with the machine's saw. (2111706)

Imagic Plugin

1. Corrected the situation in which the program was generated mirrored. (2113476)

2. Fixed the issue where the hole restriction was not applied correctly. (2113476)

KN3710 Plugin

1. Corrected the register to list and include tools correctly. (2117790)

Plugin Nanxing NCB 612

1. Fixed the situation where the settings of the Nanxing NCB 612 plugin were lost for the tools selected for slotting and drilling processes. (2106408)

Skipper 100 and Skipper 130 Plugins

1. Corrected the translation of the configuration property of the Skipper 100 and Skipper 130 machines. (2120981)

▼ 1.60.23.0

Date: 05/14/2024

Released Plugins

Plugin ABL 210 - B 1.60.23.0
Plugin Accord 40 FX 1.60.23.0
Plugin AES Extreme Ultra Router 1.60.23.0
Plugin AES Go 1300 1.60.23.0
Plugin Alca AL1200D 1.60.23.0
Plugin Alca Machine Router AL2030 3S 1.60.23.0
Plugin Alca Machine Router AL2030 ATC 1.60.23.0
Plugin Alca Maquinas AL2030B 1.60.23.0
Plugin Application of laminates per module report 1.60.23.0
Plugin Ardis Cutting Optimizer 1.60.23.0
Plugin Asia Robotica CN1325 ATC Router 1.60.23.0
Plugin Assembly Report 1.60.23.0
Plugin Assembly Steel Report 1.60.23.0
Plugin Author200 1.60.23.0
Plugin Author327 1.60.23.0
Plugin Author436S 1.60.23.0
Plugin Author500 1.60.23.0
Plugin AuthorM600 1.60.23.0
Plugin BHX050 1.60.23.0
Plugin BHX055 1.60.23.0
Plugin BHX500 1.60.23.0
Plugin Biesse Comil Insider FT2 1.60.23.0
Plugin Biesse EKO 902 1.60.23.0
Plugin Biesse FTT 1.60.23.0
Plugin Biesse Rover 22 1.60.23.0
Plugin Biesse Rover 24 1.60.23.0
Plugin Biesse Rover A4 1.60.23.0
Plugin Biesse Rover B7 1.60.23.0
Plugin Biesse Skill 300 K3 1.60.23.0
Plugin BMG110 - Venture 113-114-115 1.60.23.0
Plugin Boole Opticut Optimizer 1.60.23.0
Plugin BP 195T 1.60.23.0
Plugin Builder 1.60.23.0
Plugin Builder Budget 1.60.23.0
Plugin Builder Catalog 1.60.23.0
Plugin Builder Parts 1.60.23.0
Plugin Builder View 1.60.23.0
Plugin Builder Xml 1.60.23.0
Plugin Buselatto Jet Optima A20-C20-C21 1.60.23.0
Plugin C-Express 920 1.60.23.0
Plugin CMS Maxima 24B 1.60.23.0
Plugin Composed Panel Report 1.60.23.0
Plugin Corte Certo 1.60.23.0
Plugin CRS Exata Horizontal - Drilling Center 1.60.23.0
Plugin CRS Exata Vertical 1000 - Drilling Center 1.60.23.0
Plugin CRS Exata Vertical 1200 - Drilling Center 1.60.23.0
Plugin Cut List 1.60.23.0
Plugin Cut Planning 1.60.23.0
Plugin Cut Pro 1.60.23.0
Plugin Cut Rite 1.60.23.0
Plugin CVL Syntec Router 1.60.23.0
Plugin Cyflex 900 1.60.23.0
Plugin Cyflex 900BR 1.60.23.0
Plugin Cyflex H800 1.60.23.0
Plugin Cyflex HP - CX200 1.60.23.0
Plugin Cyflex S e SR 1.60.23.0
Plugin Delta D3020 Mach3 Router 1.60.23.0
Plugin Door Report 1.60.23.0
Plugin Drawer Report 1.60.23.0
Plugin DRILLTEQ V-200 1.60.23.0
Plugin Dynestic 7516 1.60.23.0
Plugin Easy Jet 1.60.23.0
Plugin Easynest 3018 A 1.60.23.0
Plugin Easynest 3021 1.60.23.0
Plugin Easynest 4021 1.60.23.0
Plugin Edge Band Report 1.60.23.0
Plugin ERP Focco 1.60.23.0
Plugin ERP Insight 1.60.23.0
Plugin ERP Promob 1.60.23.0
Plugin ERP Standard 1.60.23.0
Plugin ERP WPS 1.60.23.0
Plugin ETools Pro ATC 12 2030 Router 1.60.23.0
Plugin Evolution 7405 1.60.23.0
Plugin Excitech E42128D Nesting 1.60.23.0
Plugin Excitech EHSW1228 1.60.23.0
Plugin F9L 1.60.23.0
Plugin Felder Creator 950 1.60.23.0
Plugin Flexdrill 1000 1.60.23.0
Plugin Flexdrill 1200 1.60.23.0
Plugin Flexdrill 612 KS 1.60.23.0
Plugin Flexdrill 612 M 1.60.23.0
Plugin Flexdrill 61200 1.60.23.0
Plugin Format4 Profit H08 1.60.23.0
Plugin Format4 Profit H20-H22-H22L 1.60.23.0
Plugin Format4 Profit H80 1.60.23.0
Plugin Giben Flat (BDT - Spectra) 1.60.23.0
Plugin Giben Flat (Selexx - Professional Line - Stratos) 1.60.23.0
Plugin Giben Flexdrill 6 1000 Evo 1.60.23.0
Plugin Giben Genesis EVO 1.60.23.0
Plugin GPlan 1.60.23.0
Plugin HG 2030 Master 1.60.23.0
Plugin Hirzt F10 1.60.23.0
Plugin Hirzt F6 1.60.23.0
Plugin Hirzt F8 1.60.23.0
Plugin Holzer HHOS Optimizer Cut 1.60.23.0
Plugin Holzher Evolution 7401-7402 1.60.23.0
Plugin Holzher Master 1.60.23.0
Plugin Homag Weeke ABD 100 1.60.23.0
Plugin Homag Weeke ABD 250 1.60.23.0
Plugin HuaHua SKH612 1.60.23.0
Plugin IF-850 Plus 1.60.23.0
Plugin IF-8500 1.60.23.0
Plugin IMA BIMA 1.60.23.0
Plugin IMA Imagic 1.60.23.0
Plugin Integração Promob ERP Start 1.60.23.0
Plugin ISO Code 1.60.23.0
Plugin Jaragua CNC Mobile Router 2818 1.60.23.0
Plugin Jaragua CNC Mobile TAF Router 1.60.23.0
Plugin Jaragua CNC TAURUS 2818 1.60.23.0
Plugin Jaragua Compact EdingCNC Router 1.60.23.0
Plugin Jaragua Vision TAF Router 1.60.23.0
Plugin JaraguaCNC Router Exclusive 28182 1.60.23.0
Plugin JaraguaCNC Solid 1.60.23.0
Plugin JaraguaCNC Vision 1.60.23.0
Plugin Klipper RSL Taiwan Baoyuan Router 1.60.23.0
Plugin KN3710 Nesting 1.60.23.0
Plugin Lepton Optimizer 1.60.23.0
Plugin M400F 1.60.23.0
Plugin Mach CNC MACHPRO ATC 1.60.23.0
Plugin Mach CNC Router Elite Super Drill 2819 1.60.23.0
Plugin Mach Commander NC Studio Router 1.60.23.0
Plugin Mach Pro Turbo DDCS Expert Router 1.60.23.0
Plugin Mach Pro Turbo Duo DDCS Expert Router 1.60.23.0
Plugin Mak Pro 3000 Mach3 Router 1.60.23.0
Plugin Manufacturing Cabinet Report 1.60.23.0
Plugin Manufacturing Component Report 1.60.23.0
Plugin Marchiori LD 3000 Mach3 Router 1.60.23.0
Plugin Master Drill TF 500 1.60.23.0
Plugin Masterwood Nesting MW 1.60.23.0
Plugin MasterWood Project 415 1.60.23.0
Plugin MasterWood Project 465 1.60.23.0
Plugin Morbidelli M100 1.60.23.0
Plugin Morbidelli P800 1.60.23.0
Plugin Morbidelli UX100 1.60.23.0
Plugin Nanxing NCB2412 1.60.23.0
Plugin Nanxing NCB612 1.60.23.0
Plugin Nanxing NCG3021L Nesting 1.60.23.0
Plugin OMNICNC 1325 Router 1.60.23.0
Plugin OptiPlanning 1.60.23.0
Plugin Ottimo-Perfect Cut 1.60.23.0
Plugin Point 2 1.60.23.0
Plugin Pratika 280 1.60.23.0
Plugin Pratika 310 1.60.23.0
Plugin Pratika 315 1.60.23.0
Plugin Pratika 320 1.60.23.0
Plugin Pratika 325 1.60.23.0
Plugin PratixS 1.60.23.0
Plugin Profile Report 1.60.23.0
Plugin Project 250 1.60.23.0
Plugin Project 450 1.60.23.0
Plugin Project TF 1.60.23.0
Plugin PTP 1.60.23.0
Plugin PTP 160 1.60.23.0
Plugin Puchased Item Report 1.60.23.0
Plugin Raizen Bravus Syntec Router 1.60.23.0
Plugin Raizen Solid DSP Router 1.60.23.0
Plugin Raizen Solid TAF Router 1.60.23.0
Plugin Raizen Vision Plus Syntec Router 1.60.23.0
Plugin Raizen Vision TAF Router 1.60.23.0
Plugin Rhino RMC 3000 Absolute ATC Mach3 Router 1.60.23.0
Plugin Rhino RMC 3000 Absolute Mach3 Router 1.60.23.0
Plugin Rhino RMC 3000 Plus DDCS Router 1.60.23.0
Plugin Router Aspan 1.60.23.0
Plugin Router EnRouter CNC 1.60.23.0
Plugin Rover A 1332 1.60.23.0
Plugin Rover A 1532 1.60.23.0
Plugin Rover A 1542 1.60.23.0
Plugin Rover A 1625-1632-1643-1659 1.60.23.0
Plugin Rover A 3.30 1.60.23.0
Plugin Rover C9 1.60.23.0
Plugin Rover K FT 1531 1.60.23.0
Plugin Rover1836GFT 1.60.23.0
Plugin Rover20 1.60.23.0
Plugin Rover2231GFT 1.60.23.0
Plugin SARTWOOD PT6 1.60.23.0
Plugin SCM Pratika 1000 1.60.23.0
Plugin SCM Startech cn plus 1.60.23.0
Plugin SCM Startech cn v 1.60.23.0
Plugin Sideco SIR 1325 ATC Router 1.60.23.0
Plugin Skipper 100 1.60.23.0
Plugin Skipper 130 1.60.23.0
Plugin Skipper V31 1.60.23.0
Plugin SOPH MSZ600 1.60.23.0
Plugin Spazio3D 1.60.23.0
Plugin Speedy Factory 1.60.23.0
Plugin Startech 1.60.23.0
Plugin Tech 99L 1.60.23.0
Plugin Tech Z1 1.60.23.0
Plugin Tech Z2 1.60.23.0
Plugin Tech Z25 1.60.23.0
Plugin Tech Z30 1.60.23.0
Plugin Tech Z5 1.60.23.0
Plugin TekMaq 3020 Mach2 Router 1.60.23.0
Plugin Twister750NX 1.60.23.0
Plugin Uniflex 1.60.23.0
Plugin Universal NB-3618 1.60.23.0
Plugin Universal NB-3622 1.60.23.0
Plugin Universal TV 3615 1.60.23.0
Plugin Usaberg ATC 2819 Router 1.60.23.0
Plugin Usikraft Discovery ATC Router 1.60.23.0
Plugin Usikraft Evoque 2030 ATC Router 1.60.23.0
Plugin Vantage 24-25-26 series - Nesting 1.60.23.0
Plugin Venture 107 1.60.23.0
Plugin Venture 108 1.60.23.0
Plugin Venture 1M 1.60.23.0
Plugin Venture 22L 1.60.23.0
Plugin Venture 230M 1.60.23.0
Plugin Venture 2M 1.60.23.0
Plugin Venture 316 1.60.23.0
Plugin Venture 3M 1.60.23.0
Plugin Venture 8M 1.60.23.0
Plugin Venture BMG 300 1.60.23.0
Plugin Vetor Opus 1.60.23.0
Plugin Vitap Point K2 1.60.23.0
Plugin Warehouse Report 1.60.23.0
Plugin Weeke BHC280 1.60.23.0
Plugin Weeke BHT500 1.60.23.0
Plugin Weeke Optimat BHC250 1.60.23.0
Plugin WIBJ5 1.60.23.0
Plugin WPS Optimizer 1.60.23.0
Plugin X200 CELL - Nesting 1.60.23.0

Corrections

Compatibility

1. Compatibility with Promob in minimum version 5.60.30.0 has been added..

▼ 1.60.22.1

Date: 04/29/2024

Released Plugins

Plugin ABL 210 - B: 1.60.22.1
Plugin Accord 40 FX: 1.60.22.1
Plugin AES Extreme Ultra Router: 1.60.22.1
Plugin AES Go 1300: 1.60.22.1
Plugin Alca AL1200D: 1.60.22.1
Plugin Alca Machine Router AL2030 3S: 1.60.22.1
Plugin Alca Machine Router AL2030 ATC: 1.60.22.1
Plugin Alca Maquinas AL2030B: 1.60.22.1
Plugin Application of laminates per module report: 1.60.22.1
Plugin Ardis Cutting Optimizer: 1.60.22.1
Plugin Asia Robotica CN1325 ATC Router: 1.60.22.1
Plugin Assembly Report: 1.60.22.1
Plugin Assembly Steel Report: 1.60.22.1
Plugin Author200: 1.60.22.1
Plugin Author327: 1.60.22.1
Plugin Author436S: 1.60.22.1
Plugin Author500: 1.60.22.1
Plugin AuthorM600: 1.60.22.1
Plugin BHX050: 1.60.22.1
Plugin BHX055: 1.60.22.1
Plugin BHX500: 1.60.22.1
Plugin Biesse Comil Insider FT2: 1.60.22.1
Plugin Biesse EKO 902: 1.60.22.1
Plugin Biesse FTT: 1.60.22.1
Plugin Biesse Rover 22: 1.60.22.1
Plugin Biesse Rover 24: 1.60.22.1
Plugin Biesse Rover A4: 1.60.22.1
Plugin Biesse Rover B7: 1.60.22.1
Plugin Biesse Skill 300 K3: 1.60.22.1
Plugin BMG110 - Venture 113-114-115: 1.60.22.1
Plugin Boole Opticut Optimizer: 1.60.22.1
Plugin BP 195T: 1.60.22.1
Plugin Builder: 1.60.22.1
Plugin Builder Budget: 1.60.22.1
Plugin Builder Catalog: 1.60.22.1
Plugin Builder Parts: 1.60.22.1
Plugin Builder View: 1.60.22.1
Plugin Builder Xml: 1.60.22.1
Plugin Buselatto Jet Optima A20-C20-C21: 1.60.22.1
Plugin C-Express 920: 1.60.22.1
Plugin CMS Maxima 24B: 1.60.22.1
Plugin Composed Panel Report: 1.60.22.1
Plugin Corte Certo: 1.60.22.1
Plugin CRS Exata Horizontal - Drilling Center: 1.60.22.1
Plugin CRS Exata Vertical 1000 - Drilling Center: 1.60.22.1
Plugin CRS Exata Vertical 1200 - Drilling Center: 1.60.22.1
Plugin Cut List: 1.60.22.1
Plugin Cut Planning: 1.60.22.1
Plugin Cut Pro: 1.60.22.1
Plugin Cut Rite: 1.60.22.1
Plugin CVL Syntec Router: 1.60.22.1
Plugin Cyflex 900: 1.60.22.1
Plugin Cyflex 900BR: 1.60.22.1
Plugin Cyflex H800: 1.60.22.1
Plugin Cyflex HP - CX200: 1.60.22.1
Plugin Cyflex S e SR: 1.60.22.1
Plugin Delta D3020 Mach3 Router: 1.60.22.1
Plugin Door Report: 1.60.22.1
Plugin Drawer Report: 1.60.22.1
Plugin DRILLTEQ V-200: 1.60.22.1
Plugin Dynestic 7516: 1.60.22.1
Plugin Easy Jet: 1.60.22.1
Plugin Easynest 3018 A: 1.60.22.1
Plugin Easynest 3021: 1.60.22.1
Plugin Easynest 4021: 1.60.22.1
Plugin Edge Band Report: 1.60.22.1
Plugin ERP Focco: 1.60.22.1
Plugin ERP Insight: 1.60.22.1
Plugin ERP Promob: 1.60.22.1
Plugin ERP Standard: 1.60.22.1
Plugin ERP WPS: 1.60.22.1
Plugin ETools Pro ATC 12 2030 Router: 1.60.22.1
Plugin Evolution 7405: 1.60.22.1
Plugin Excitech E42128D Nesting: 1.60.22.1
Plugin Excitech EHSW1228: 1.60.22.1
Plugin F9L: 1.60.22.1
Plugin Felder Creator 950: 1.60.22.1
Plugin Flexdrill 1000: 1.60.22.1
Plugin Flexdrill 1200: 1.60.22.1
Plugin Flexdrill 612 KS: 1.60.22.1
Plugin Flexdrill 612 M: 1.60.22.1
Plugin Flexdrill 61200: 1.60.22.1
Plugin Format4 Profit H08: 1.60.22.1
Plugin Format4 Profit H20-H22-H22L: 1.60.22.1
Plugin Format4 Profit H80: 1.60.22.1
Plugin Giben Flat (BDT - Spectra): 1.60.22.1
Plugin Giben Flat (Selexx - Professional Line - Stratos): 1.60.22.1
Plugin Giben Flexdrill 6 1000 Evo: 1.60.22.1
Plugin Giben Genesis EVO: 1.60.22.1
Plugin GPlan: 1.60.22.1
Plugin HG 2030 Master: 1.60.22.1
Plugin Hirzt F10: 1.60.22.1
Plugin Hirzt F6: 1.60.22.1
Plugin Hirzt F8: 1.60.22.1
Plugin Holzer HHOS Optimizer Cut: 1.60.22.1
Plugin Holzher Evolution 7401-7402: 1.60.22.1
Plugin Holzher Master: 1.60.22.1
Plugin Homag Weeke ABD 100: 1.60.22.1
Plugin Homag Weeke ABD 250: 1.60.22.1
Plugin HuaHua SKH612: 1.60.22.1
Plugin IF-850 Plus: 1.60.22.1
Plugin IF-8500: 1.60.22.1
Plugin IMA BIMA: 1.60.22.1
Plugin IMA Imagic: 1.60.22.1
Plugin Integração Promob ERP Start: 1.60.22.1
Plugin ISO Code: 1.60.22.1
Plugin Jaragua CNC Mobile Router 2818: 1.60.22.1
Plugin Jaragua CNC Mobile TAF Router: 1.60.22.1
Plugin Jaragua CNC TAURUS 2818: 1.60.22.1
Plugin Jaragua Compact EdingCNC Router: 1.60.22.1
Plugin Jaragua Vision TAF Router: 1.60.22.1
Plugin JaraguaCNC Router Exclusive 28182: 1.60.22.1
Plugin JaraguaCNC Solid: 1.60.22.1
Plugin JaraguaCNC Vision: 1.60.22.1
Plugin Klipper RSL Taiwan Baoyuan Router: 1.60.22.1
Plugin KN3710 Nesting: 1.60.22.1
Plugin Lepton Optimizer: 1.60.22.1
Plugin M400F: 1.60.22.1
Plugin Mach CNC MACHPRO ATC: 1.60.22.1
Plugin Mach CNC Router Elite Super Drill 2819: 1.60.22.1
Plugin Mach Commander NC Studio Router: 1.60.22.1
Plugin Mach Pro Turbo DDCS Expert Router: 1.60.22.1
Plugin Mach Pro Turbo Duo DDCS Expert Router: 1.60.22.1
Plugin Mak Pro 3000 Mach3 Router: 1.60.22.1
Plugin Manufacturing Cabinet Report: 1.60.22.1
Plugin Manufacturing Component Report: 1.60.22.1
Plugin Marchiori LD 3000 Mach3 Router: 1.60.22.1
Plugin Master Drill TF 500: 1.60.22.1
Plugin Masterwood Nesting MW: 1.60.22.1
Plugin MasterWood Project 415: 1.60.22.1
Plugin MasterWood Project 465: 1.60.22.1
Plugin Morbidelli M100: 1.60.22.1
Plugin Morbidelli P800: 1.60.22.1
Plugin Morbidelli UX100: 1.60.22.1
Plugin Nanxing NCB2412: 1.60.22.1
Plugin Nanxing NCB612: 1.60.22.1
Plugin Nanxing NCG3021L Nesting: 1.60.22.1
Plugin OMNICNC 1325 Router: 1.60.22.1
Plugin OptiPlanning: 1.60.22.1
Plugin Ottimo-Perfect Cut: 1.60.22.1
Plugin Point 2: 1.60.22.1
Plugin Pratika 280: 1.60.22.1
Plugin Pratika 310: 1.60.22.1
Plugin Pratika 315: 1.60.22.1
Plugin Pratika 320: 1.60.22.1
Plugin Pratika 325: 1.60.22.1
Plugin PratixS: 1.60.22.1
Plugin Profile Report: 1.60.22.1
Plugin Project 250: 1.60.22.1
Plugin Project 450: 1.60.22.1
Plugin Project TF: 1.60.22.1
Plugin PTP: 1.60.22.1
Plugin PTP 160: 1.60.22.1
Plugin Puchased Item Report: 1.60.22.1
Plugin Raizen Bravus Syntec Router: 1.60.22.1
Plugin Raizen Solid DSP Router: 1.60.22.1
Plugin Raizen Solid TAF Router: 1.60.22.1
Plugin Raizen Vision TAF Router: 1.60.22.1
Plugin Rhino RMC 3000 Absolute ATC Mach3 Router: 1.60.22.1
Plugin Rhino RMC 3000 Absolute Mach3 Router: 1.60.22.1
Plugin Rhino RMC 3000 Plus DDCS Router: 1.60.22.1
Plugin Router Aspan: 1.60.22.1
Plugin Router EnRouter CNC: 1.60.22.1
Plugin Rover A 1332: 1.60.22.1
Plugin Rover A 1532: 1.60.22.1
Plugin Rover A 1542: 1.60.22.1
Plugin Rover A 1625-1632-1643-1659: 1.60.22.1
Plugin Rover A 3.30: 1.60.22.1
Plugin Rover C9: 1.60.22.1
Plugin Rover K FT 1531: 1.60.22.1
Plugin Rover1836GFT: 1.60.22.1
Plugin Rover20: 1.60.22.1
Plugin Rover2231GFT: 1.60.22.1
Plugin SARTWOOD PT6: 1.60.22.1
Plugin SCM Pratika 1000: 1.60.22.1
Plugin SCM Startech cn plus: 1.60.22.1
Plugin SCM Startech cn v: 1.60.22.1
Plugin Sideco SIR 1325 ATC Router: 1.60.22.1
Plugin Skipper 100: 1.60.22.1
Plugin Skipper 130: 1.60.22.1
Plugin Skipper V31: 1.60.22.1
Plugin SOPH MSZ600: 1.60.22.1
Plugin Spazio3D: 1.60.22.1
Plugin Speedy Factory: 1.60.22.1
Plugin Startech: 1.60.22.1
Plugin Tech 99L: 1.60.22.1
Plugin Tech Z1: 1.60.22.1
Plugin Tech Z2: 1.60.22.1
Plugin Tech Z25: 1.60.22.1
Plugin Tech Z30: 1.60.22.1
Plugin Tech Z5: 1.60.22.1
Plugin TekMaq 3020 Mach2 Router: 1.60.22.1
Plugin Twister750NX: 1.60.22.1
Plugin Uniflex: 1.60.22.1
Plugin Universal NB-3618: 1.60.22.1
Plugin Universal NB-3622: 1.60.22.1
Plugin Universal TV 3615: 1.60.22.1
Plugin Usaberg ATC 2819 Router: 1.60.22.1
Plugin Usikraft Discovery ATC Router: 1.60.22.1
Plugin Usikraft Evoque 2030 ATC Router: 1.60.22.1
Plugin Vantage 24-25-26 series - Nesting: 1.60.22.1
Plugin Venture 107: 1.60.22.1
Plugin Venture 108: 1.60.22.1
Plugin Venture 1M: 1.60.22.1
Plugin Venture 22L: 1.60.22.1
Plugin Venture 230M: 1.60.22.1
Plugin Venture 2M: 1.60.22.1
Plugin Venture 316: 1.60.22.1
Plugin Venture 3M: 1.60.22.1
Plugin Venture 8M: 1.60.22.1
Plugin Venture BMG 300: 1.60.22.1
Plugin Vetor Opus: 1.60.22.1
Plugin Vitap Point K2: 1.60.22.1
Plugin Warehouse Report: 1.60.22.1
Plugin Weeke BHC280: 1.60.22.1
Plugin Weeke BHT500: 1.60.22.1
Plugin Weeke Optimat BHC250: 1.60.22.1
Plugin WIBJ5: 1.60.22.1
Plugin WPS Optimizer: 1.60.22.1
Plugin X200 CELL - Nesting: 1.60.22.1

Enhancements

Builder Assembly

1. New Builder Assembly for edge bands have been created, which return the complete band reference. For more information, click here.

Rover and Skipper Machines

1. Added functionality where it is possible to define the reference point for evaluations on Rover and Skipper machines. For more information, click aqui. (2084301)

Image 2 ENG.png

Technical Drawing Settings

1. Added a new feature that allows only one of the faces to be represented in drawings of parts with through operations, eliminating the need to represent the opposite face, unless there are other non-through operations. For more information, click here. (1812337)

Plugins New

1. Added the Mach Pro Turbo Duo DDCS Expert Router plugin for machines. For more information, click here.

2. Added the AES Extreme Ultra Router plugin for machines.

Corrections

Builder XML

1. Fixed the situation where machining radii on the profile face were incorrect for the XML Machine Builder. (2069082)

Builder Parts

1. Fixed the situation where the tear was not displayed on the part. (2075489)

Giben KN3710

1. Corrected the situation in which machining operations were performed incorrectly in the Giben KN3710 plugin. (2093090)

Machines Builder

1. Corrigida a situação em que as ferramentas não obtinham as informações corretas na abertura do Builder.

Cutting Plan

1. Adjusted the parts that were overlapping in the Nesting program. (2104129)

Machine Programs

1. Fixed the situation where the saw alignment setting was not considered. (2105425)

2. Adjusted parts conversion from XCS to XXL. (2106907)

3. Adjusted parts conversion from XCS to PGMX. (2093495)

Machine Programs and Drawings

1. Fixed the situation where, when generating machine programs, items with variable depth and mirrored lost depth value. (2106123)

Machine Programs and Cut Pro Plugin

1. Made a change to reduce the slowness in module imaging using the new processing engine. (2043304 and 2052392)

Skipper 100 and Skipper 130

1. Fixed the situation where the hole constraint evaluated the incorrect side of the part. (2101794)

▼ 1.60.22.0

Date: 04/03/2024

Released Plugins

P Plugin ABL 210 - B: 1.60.22.0
Plugin Accord 40 FX: 1.60.22.0
Plugin AES Go 1300: 1.60.22.0
Plugin Alca AL1200D: 1.60.22.0
Plugin Alca Machine Router AL2030 3S: 1.60.22.0
Plugin Alca Machine Router AL2030 ATC: 1.60.22.0
Plugin Alca Maquinas AL2030B: 1.60.22.0
Plugin Application of laminates per module report: 1.60.22.0
Plugin Ardis Cutting Optimizer: 1.60.22.0
Plugin Asia Robotica CN1325 ATC Router: 1.60.22.0
Plugin Assembly Report: 1.60.22.0
Plugin Assembly Steel Report: 1.60.22.0
Plugin Author200: 1.60.22.0
Plugin Author327: 1.60.22.0
Plugin Author436S: 1.60.22.0
Plugin Author500: 1.60.22.0
Plugin AuthorM600: 1.60.22.0
Plugin BHX050: 1.60.22.0
Plugin BHX055: 1.60.22.0
Plugin BHX500: 1.60.22.0
Plugin Biesse Comil Insider FT2: 1.60.22.0
Plugin Biesse EKO 902: 1.60.22.0
Plugin Biesse FTT: 1.60.22.0
Plugin Biesse Rover 22: 1.60.22.0
Plugin Biesse Rover 24: 1.60.22.0
Plugin Biesse Rover A4: 1.60.22.0
Plugin Biesse Rover B7: 1.60.22.0
Plugin Biesse Skill 300 K3: 1.60.22.0
Plugin BMG110 - Venture 113-114-115: 1.60.22.0
Plugin Boole Opticut Optimizer: 1.60.22.0
Plugin BP 195T: 1.60.22.0
Plugin Builder: 1.60.22.0
Plugin Builder Budget: 1.60.22.0
Plugin Builder Catalog: 1.60.22.0
Plugin Builder Parts: 1.60.22.0
Plugin Builder View: 1.60.22.0
Plugin Builder Xml: 1.60.22.0
Plugin Buselatto Jet Optima A20-C20-C21: 1.60.22.0
Plugin C-Express 920: 1.60.22.0
Plugin CMS Maxima 24B: 1.60.22.0
Plugin Composed Panel Report: 1.60.22.0
Plugin Corte Certo: 1.60.22.0
Plugin CRS Exata Horizontal - Drilling Center: 1.60.22.0
Plugin CRS Exata Vertical 1000 - Drilling Center: 1.60.22.0
Plugin CRS Exata Vertical 1200 - Drilling Center: 1.60.22.0
Plugin Cut List: 1.60.22.0
Plugin Cut Planning: 1.60.22.0
Plugin Cut Pro: 1.60.22.0
Plugin Cut Rite: 1.60.22.0
Plugin CVL Syntec Router: 1.60.22.0
Plugin Cyflex 900: 1.60.22.0
Plugin Cyflex 900BR: 1.60.22.0
Plugin Cyflex H800: 1.60.22.0
Plugin Cyflex HP - CX200: 1.60.22.0
Plugin Cyflex S e SR: 1.60.22.0
Plugin Delta D3020 Mach3 Router: 1.60.22.0
Plugin Door Report: 1.60.22.0
Plugin Drawer Report: 1.60.22.0
Plugin DRILLTEQ V-200: 1.60.22.0
Plugin Dynestic 7516: 1.60.22.0
Plugin Easy Jet: 1.60.22.0
Plugin Easynest 3018 A: 1.60.22.0
Plugin Easynest 3021: 1.60.22.0
Plugin Easynest 4021: 1.60.22.0
Plugin Edge Band Report: 1.60.22.0
Plugin ERP Focco: 1.60.22.0
Plugin ERP Insight: 1.60.22.0
Plugin ERP Promob: 1.60.22.0
Plugin ERP Standard: 1.60.22.0
Plugin ERP WPS: 1.60.22.0
Plugin ETools Pro ATC 12 2030 Router: 1.60.22.0
Plugin Evolution 7405: 1.60.22.0
Plugin Excitech E42128D Nesting: 1.60.22.0
Plugin Excitech EHSW1228: 1.60.22.0
Plugin F9L: 1.60.22.0
Plugin Felder Creator 950: 1.60.22.0
Plugin Flexdrill 1000: 1.60.22.0
Plugin Flexdrill 1200: 1.60.22.0
Plugin Flexdrill 612 KS: 1.60.22.0
Plugin Flexdrill 612 M: 1.60.22.0
Plugin Flexdrill 61200: 1.60.22.0
Plugin Format4 Profit H08: 1.60.22.0
Plugin Format4 Profit H20-H22-H22L: 1.60.22.0
Plugin Format4 Profit H80: 1.60.22.0
Plugin Giben Flat (BDT - Spectra): 1.60.22.0
Plugin Giben Flat (Selexx - Professional Line - Stratos): 1.60.22.0
Plugin Giben Flexdrill 6 1000 Evo: 1.60.22.0
Plugin Giben Genesis EVO: 1.60.22.0
Plugin GPlan: 1.60.22.0
Plugin HG 2030 Master: 1.60.22.0
Plugin Hirzt F10: 1.60.22.0
Plugin Hirzt F6: 1.60.22.0
Plugin Hirzt F8: 1.60.22.0
Plugin Holzer HHOS Optimizer Cut: 1.60.22.0
Plugin Holzher Evolution 7401-7402: 1.60.22.0
Plugin Holzher Master: 1.60.22.0
Plugin Homag Weeke ABD 100: 1.60.22.0
Plugin Homag Weeke ABD 250: 1.60.22.0
Plugin IF-850 Plus: 1.60.22.0
Plugin IF-8500: 1.60.22.0
Plugin IMA BIMA: 1.60.22.0
Plugin IMA Imagic: 1.60.22.0
Plugin Integração Promob ERP Start: 1.60.22.0
Plugin ISO Code: 1.60.22.0
Plugin Jaragua CNC Mobile Router 2818: 1.60.22.0
Plugin Jaragua CNC Mobile TAF Router: 1.60.22.0
Plugin Jaragua CNC TAURUS 2818: 1.60.22.0
Plugin Jaragua Compact EdingCNC Router: 1.60.22.0
Plugin Jaragua Vision TAF Router: 1.60.22.0
Plugin JaraguaCNC Router Exclusive 28182: 1.60.22.0
Plugin JaraguaCNC Solid: 1.60.22.0
Plugin JaraguaCNC Vision: 1.60.22.0
Plugin Klipper RSL Taiwan Baoyuan Router: 1.60.22.0
Plugin KN3710 Nesting: 1.60.22.0
Plugin Lepton Optimizer: 1.60.22.0
Plugin M400F: 1.60.22.0
Plugin Mach CNC MACHPRO ATC: 1.60.22.0
Plugin Mach CNC Router Elite Super Drill 2819: 1.60.22.0
Plugin Mach Commander NC Studio Router: 1.60.22.0
Plugin Mach Pro Turbo DDCS Expert Router: 1.60.22.0
Plugin Mak Pro 3000 Mach3 Router: 1.60.22.0
Plugin Manufacturing Cabinet Report: 1.60.22.0
Plugin Manufacturing Component Report: 1.60.22.0
Plugin Marchiori LD 3000 Mach3 Router: 1.60.22.0
Plugin Master Drill TF 500: 1.60.22.0
Plugin Masterwood Nesting MW: 1.60.22.0
Plugin MasterWood Project 415: 1.60.22.0
Plugin MasterWood Project 465: 1.60.22.0
Plugin Morbidelli M100: 1.60.22.0
Plugin Morbidelli P800: 1.60.22.0
Plugin Morbidelli UX100: 1.60.22.0
Plugin Nanxing NCB2412: 1.60.22.0
Plugin Nanxing NCB612: 1.60.22.0
Plugin Nanxing NCG3021L Nesting: 1.60.22.0
Plugin OMNICNC 1325 Router: 1.60.22.0
Plugin OptiPlanning: 1.60.22.0
Plugin Ottimo-Perfect Cut: 1.60.22.0
Plugin Point 2: 1.60.22.0
Plugin Pratika 280: 1.60.22.0
Plugin Pratika 310: 1.60.22.0
Plugin Pratika 315: 1.60.22.0
Plugin Pratika 320: 1.60.22.0
Plugin Pratika 325: 1.60.22.0
Plugin PratixS: 1.60.22.0
Plugin Profile Report: 1.60.22.0
Plugin Project 250: 1.60.22.0
Plugin Project 450: 1.60.22.0
Plugin Project TF: 1.60.22.0
Plugin PTP: 1.60.22.0
Plugin PTP 160: 1.60.22.0
Plugin Puchased Item Report: 1.60.22.0
Plugin Raizen Bravus Syntec Router: 1.60.22.0
Plugin Raizen Solid DSP Router: 1.60.22.0
Plugin Raizen Solid TAF Router: 1.60.22.0
Plugin Raizen Vision TAF Router: 1.60.22.0
Plugin Rhino RMC 3000 Absolute ATC Mach3 Router: 1.60.22.0
Plugin Rhino RMC 3000 Absolute Mach3 Router: 1.60.22.0
Plugin Rhino RMC 3000 Plus DDCS Router: 1.60.22.0
Plugin Router Aspan: 1.60.22.0
Plugin Router EnRouter CNC: 1.60.22.0
Plugin Rover A 1332: 1.60.22.0
Plugin Rover A 1532: 1.60.22.0
Plugin Rover A 1542: 1.60.22.0
Plugin Rover A 1625-1632-1643-1659: 1.60.22.0
Plugin Rover A 3.30: 1.60.22.0
Plugin Rover C9: 1.60.22.0
Plugin Rover K FT 1531: 1.60.22.0
Plugin Rover1836GFT: 1.60.22.0
Plugin Rover20: 1.60.22.0
Plugin Rover2231GFT: 1.60.22.0
Plugin SARTWOOD PT6: 1.60.22.0
Plugin SCM Pratika 1000: 1.60.22.0
Plugin SCM Startech cn plus: 1.60.22.0
Plugin SCM Startech cn v: 1.60.22.0
Plugin Sideco SIR 1325 ATC Router: 1.60.22.0
Plugin Skipper 100: 1.60.22.0
Plugin Skipper 130: 1.60.22.0
Plugin Skipper V31: 1.60.22.0
Plugin SOPH MSZ600: 1.60.22.0
Plugin Spazio3D: 1.60.22.0
Plugin Speedy Factory: 1.60.22.0
Plugin Startech: 1.60.22.0
Plugin Tech 99L: 1.60.22.0
Plugin Tech Z1: 1.60.22.0
Plugin Tech Z2: 1.60.22.0
Plugin Tech Z25: 1.60.22.0
Plugin Tech Z30: 1.60.22.0
Plugin Tech Z5: 1.60.22.0
Plugin TekMaq 3020 Mach2 Router: 1.60.22.0
Plugin Twister750NX: 1.60.22.0
Plugin Uniflex: 1.60.22.0
Plugin Universal NB-3618: 1.60.22.0
Plugin Universal NB-3622: 1.60.22.0
Plugin Universal TV 3615: 1.60.22.0
Plugin Usaberg ATC 2819 Router: 1.60.22.0
Plugin Usikraft Discovery ATC Router: 1.60.22.0
Plugin Usikraft Evoque 2030 ATC Router: 1.60.22.0
Plugin Vantage 24-25-26 series - Nesting: 1.60.22.0
Plugin Venture 107: 1.60.22.0
Plugin Venture 108: 1.60.22.0
Plugin Venture 1M: 1.60.22.0
Plugin Venture 22L: 1.60.22.0
Plugin Venture 230M: 1.60.22.0
Plugin Venture 2M: 1.60.22.0
Plugin Venture 316: 1.60.22.0
Plugin Venture 3M: 1.60.22.0
Plugin Venture 8M: 1.60.22.0
Plugin Venture BMG 300: 1.60.22.0
Plugin Vetor Opus: 1.60.22.0
Plugin Vitap Point K2: 1.60.22.0
Plugin Warehouse Report: 1.60.22.0
Plugin Weeke BHC280: 1.60.22.0
Plugin Weeke BHT500: 1.60.22.0
Plugin Weeke Optimat BHC250: 1.60.22.0
Plugin WIBJ5: 1.60.22.0
Plugin WPS Optimizer: 1.60.22.0
Plugin X200 CELL - Nesting: 1.60.22.0

Enhancements

Promob compatibility

1. Added compatibility with Promob, the minimum compatible version is 5.60.28.0.

Project Auditing

1. Added functionality to disable production tools for projects in the audit process. For more information, click here.

Plugins New

1. Added a new machine plugin, the Jaraguá Vision TAF Router plugin. .

2. Added a new machine plugin, the Raizen Bravus Syntec Router plugin.

▼ 1.60.21.4

Date: 03/22/2024

Plugins Liberados

Plugin ABL 210 - B: 1.60.21.1
Plugin Accord 40 FX: 1.60.21.1
Plugin Alca AL1200D: 1.60.21.4
Plugin Alca Machine Router AL2030 3S: 1.60.21.1
Plugin Alca Machine Router AL2030 ATC: 1.60.21.1
Plugin Alca Maquinas AL2030B: 1.60.21.1
Plugin Application of laminates per module report: 1.60.21.1
Plugin Ardis Cutting Optimizer: 1.60.21.2
Plugin Asia Robotica CN1325 ATC Router: 1.60.21.1
Plugin Assembly Report: 1.60.21.1
Plugin Assembly Steel Report: 1.60.21.1
Plugin Author200: 1.60.21.1
Plugin Author327: 1.60.21.1
Plugin Author436S: 1.60.21.1
Plugin Author500: 1.60.21.1
Plugin AuthorM600: 1.60.21.1
Plugin BHX050: 1.60.21.1
Plugin BHX055: 1.60.21.4
Plugin BHX500: 1.60.21.4
Plugin Biesse Comil Insider FT2: 1.60.21.1
Plugin Biesse EKO 902: 1.60.21.2
Plugin Biesse FTT: 1.60.21.2
Plugin Biesse Rover 22: 1.60.21.1
Plugin Biesse Rover 24: 1.60.21.1
Plugin Biesse Rover A4: 1.60.21.1
Plugin Biesse Rover B7: 1.60.21.1
Plugin Biesse Skill 300 K3: 1.60.21.1
Plugin BMG110 - Venture 113-114-115: 1.60.21.1
Plugin Boole Opticut Optimizer: 1.60.21.1
Plugin BP 195T: 1.60.21.1
Plugin Builder: 1.60.21.4
Plugin Builder Budget: 1.60.21.3
Plugin Builder Catalog: 1.60.21.3
Plugin Builder Parts: 1.60.21.4
Plugin Builder View: 1.60.21.1
Plugin Builder Xml: 1.60.21.4
Plugin Buselatto Jet Optima A20-C20-C21: 1.60.21.1
Plugin C-Express 920: 1.60.21.1
Plugin CMS Maxima 24B: 1.60.21.4
Plugin Composed Panel Report: 1.60.21.1
Plugin Corte Certo: 1.60.21.2
Plugin CRS Exata Horizontal - Drilling Center: 1.60.21.1
Plugin CRS Exata Vertical 1000 - Drilling Center: 1.60.21.1
Plugin CRS Exata Vertical 1200 - Drilling Center: 1.60.21.1
Plugin Cut List: 1.60.21.2
Plugin Cut Planning: 1.60.21.1
Plugin Cut Pro: 1.60.21.4
Plugin Cut Rite: 1.60.21.1
Plugin CVL Syntec Router: 1.60.21.1
Plugin Cyflex 900: 1.60.21.1
Plugin Cyflex 900BR: 1.60.21.1
Plugin Cyflex H800: 1.60.21.1
Plugin Cyflex HP - CX200: 1.60.21.1
Plugin Cyflex S e SR: 1.60.21.4
Plugin Delta D3020 Mach3 Router: 1.60.21.4
Plugin Door Report: 1.60.21.1
Plugin Drawer Report: 1.60.21.1
Plugin DRILLTEQ V-200: 1.60.21.1
Plugin Dynestic 7516: 1.60.21.1
Plugin Easy Jet: 1.60.21.1
Plugin Easynest 3021: 1.60.21.1
Plugin Easynest 4021: 1.60.21.1
Plugin Edge Band Report: 1.60.21.1
Plugin ERP Focco: 1.60.21.1
Plugin ERP Insight: 1.60.21.3
Plugin ERP Promob: 1.60.21.3
Plugin ERP Standard: 1.60.21.3
Plugin ERP WPS: 1.60.21.2
Plugin ETools Pro ATC 12 2030 Router: 1.60.21.1
Plugin Evolution 7405: 1.60.21.4
Plugin Excitech E42128D Nesting: 1.60.21.3
Plugin Excitech EHSW1228: 1.60.21.4
Plugin F9L: 1.60.21.1
Plugin Felder Creator 950: 1.60.21.2
Plugin Flexdrill 1000: 1.60.21.3
Plugin Format4 Profit H08: 1.60.21.1
Plugin Format4 Profit H20-H22-H22L: 1.60.21.1
Plugin Format4 Profit H80: 1.60.21.1
Plugin Giben Flat (BDT - Spectra): 1.60.21.1
Plugin Giben Flat (Selexx - Professional Line - Stratos) 1.60.21.1
Plugin Giben Flexdrill 6 1000 Evo: 1.60.21.2
Plugin Giben Genesis EVO: 1.60.21.1
Plugin GPlan: 1.60.21.2
Plugin HG 2030 Master: 1.60.21.1
Plugin Hirzt F10: 1.60.21.1
Plugin Hirzt F6: 1.60.21.1
Plugin Hirzt F8: 1.60.21.1
Plugin Holzer HHOS Optimizer Cut: 1.60.21.1
Plugin Holzher Evolution 7401-7402: 1.60.21.4
Plugin Holzher Master: 1.60.21.1
Plugin Homag Weeke ABD 100: 1.60.21.1
Plugin Homag Weeke ABD 250: 1.60.21.1
Plugin IF-850 Plus: 1.60.21.1
Plugin IF-8500: 1.60.21.1
Plugin IMA BIMA: 1.60.21.4
Plugin IMA Imagic: 1.60.21.4
Plugin Integração Promob ERP Start: 1.60.21.3
Plugin ISO Code: 1.60.21.2
Plugin Jaragua CNC Mobile Router 2818: 1.60.21.1
Plugin Jaragua CNC Mobile TAF Router: 1.60.21.1
Plugin Jaragua CNC TAURUS 2818: 1.60.21.1
Plugin Jaragua Compact EdingCNC Router: 1.60.21.1
Plugin JaraguaCNC Router Exclusive 28182: 1.60.21.1
Plugin JaraguaCNC Solid: 1.60.21.1
Plugin JaraguaCNC Vision: 1.60.21.1
Plugin KN3710 Nesting: 1.60.21.1
Plugin Lepton Optimizer: 1.60.21.1
Plugin M400F: 1.60.21.1
Plugin Mach CNC MACHPRO ATC: 1.60.21.1
Plugin Mach CNC Router Elite Super Drill 2819: 1.60.21.1
Plugin Mach Commander NC Studio Router: 1.60.21.1
Plugin Mach Pro Turbo DDCS Expert Router: 1.60.21.1
Plugin Mak Pro 3000 Mach3 Router: 1.60.21.1
Plugin Manufacturing Cabinet Report: 1.60.21.1
Plugin Manufacturing Component Report: 1.60.21.1
Plugin Marchiori LD 3000 Mach3 Router: 1.60.21.1
Plugin Masterwood Nesting MW: 1.60.21.1
Plugin MasterWood Project 415: 1.60.21.1
Plugin MasterWood Project 465: 1.60.21.1
Plugin Morbidelli M100: 1.60.21.4
Plugin Morbidelli P800: 1.60.21.4
Plugin Morbidelli UX100: 1.60.21.3
Plugin Nanxing NCB2412: 1.60.21.2
Plugin Nanxing NCB612: 1.60.21.3
Plugin Nanxing NCG3021L Nesting: 1.60.21.3
Plugin OMNICNC 1325 Router: 1.60.21.1
Plugin OptiPlanning: 1.60.21.1
Plugin Ottimo-Perfect Cut: 1.60.21.2
Plugin Point 2: 1.60.21.1
Plugin Pratika 280: 1.60.21.2
Plugin Pratika 310: 1.60.21.1
Plugin Pratika 315: 1.60.21.1
Plugin Pratika 320: 1.60.21.1
Plugin Pratika 325: 1.60.21.1
Plugin PratixS: 1.60.21.1
Plugin Profile Report: 1.60.21.1
Plugin Project 250: 1.60.21.1
Plugin Project 450: 1.60.21.1
Plugin Project TF: 1.60.21.1
Plugin PTP: 1.60.21.1
Plugin PTP 160: 1.60.21.2
Plugin Puchased Item Report: 1.60.21.1
Plugin Raizen Solid DSP Router: 1.60.21.4
Plugin Raizen Solid TAF Router: 1.60.21.1
Plugin Raizen Vision TAF Router: 1.60.21.4
Plugin Rhino RMC 3000 Absolute ATC Mach3 Router: 1.60.21.1
Plugin Rhino RMC 3000 Absolute Mach3 Router: 1.60.21.1
Plugin Router Aspan: 1.60.21.4
Plugin Router EnRouter CNC: 1.60.21.4
Plugin Rover A 1332: 1.60.21.4
Plugin Rover A 1532: 1.60.21.4
Plugin Rover A 1542: 1.60.21.1
Plugin Rover A 1625-1632-1643-1659: 1.60.21.1
Plugin Rover A 3.30: 1.60.21.2
Plugin Rover C9: 1.60.21.2
Plugin Rover K FT 1531: 1.60.21.1
Plugin Rover1836GFT: 1.60.21.1
Plugin Rover20: 1.60.21.1
Plugin Rover2231GFT: 1.60.21.1
Plugin SARTWOOD PT6: 1.60.21.3
Plugin SCM Pratika 1000: 1.60.21.4
Plugin SCM Startech cn plus: 1.60.21.1
Plugin SCM Startech cn v: 1.60.21.1
Plugin Sideco SIR 1325 ATC Router: 1.60.21.1
Plugin Skipper 100: 1.60.21.3
Plugin Skipper 130: 1.60.21.3
Plugin Skipper V31: 1.60.21.2
Plugin SOPH MSZ600: 1.60.21.4
Plugin Spazio3D: 1.60.21.1
Plugin Speedy Factory: 1.60.21.2
Plugin Startech: 1.60.21.3
Plugin Tech 99L: 1.60.21.1
Plugin Tech Z1: 1.60.21.1
Plugin Tech Z2: 1.60.21.1
Plugin Tech Z25: 1.60.21.1
Plugin Tech Z30: 1.60.21.1
Plugin TekMaq 3020 Mach2 Router: 1.60.21.1
Plugin Twister750NX: 1.60.21.1
Plugin Uniflex: 1.60.21.1
Plugin Universal NB-3618: 1.60.21.1
Plugin Universal NB-3622: 1.60.21.1
Plugin Universal TV 3615: 1.60.21.1
Plugin Usaberg ATC 2819 Router: 1.60.21.1
Plugin Usikraft Discovery ATC Router: 1.60.21.2
Plugin Usikraft Evoque 2030 ATC Router: 1.60.21.1
Plugin Vantage 24-25-26 series - Nesting: 1.60.21.2
Plugin Venture 107: 1.60.21.1
Plugin Venture 108: 1.60.21.4
Plugin Venture 1M: 1.60.21.4
Plugin Venture 22L: 1.60.21.1
Plugin Venture 230M: 1.60.21.4
Plugin Venture 2M: 1.60.21.4
Plugin Venture 316: 1.60.21.4
Plugin Venture 3M: 1.60.21.4
Plugin Venture 8M: 1.60.21.4
Plugin Vetor Opus: 1.60.21.1
Plugin Vitap Point K2: 1.60.21.1
Plugin Warehouse Report: 1.60.21.1
Plugin Weeke BHC280: 1.60.21.1
Plugin Weeke BHT500: 1.60.21.1
Plugin Weeke Optimat BHC250: 1.60.21.1
Plugin WIBJ5: 1.60.21.1
Plugin WPS Optimizer: 1.60.21.1
Plugin X200 CELL - Nesting: 1.60.21.2

Enhancements

Machines Configuration

1. Added the option to invert machining depths. For more information, click here. (2093216)

Inverter profundidades 03_ (1).png

Technical Drawing

1. Three new options have been created in Technical Drawing. For more information, click here e here.

Option to display the maximum and minimum slot values in the technical drawing.
Option to represent hole coordinates by quadrants.
Settings option to change the ordering of the hole columns in the technical drawing. (1971548)

Config_des_EN_ (09).png

M400F | Universal NB3618 | Universal NB3622
1. Implemented the Rectangular Nesting import functionality in Maestro. (2058891)

For information on the M400F machine, click here.

For information on the Universal NB3618 machine, click here.

For information on the Universal NB3622 machine, click here.

Cut Optimizers
1. New settings for cut optimizers created:

Added the option to Concatenate material type with description. Optimizers included: all.

Added functionality to generate .csv files separated by material. Optimizers with this feature: Ardis, BooleOpticut, Cut Planning, CutRite, Gplan, HHOS, Lepton, Opti Planning, Ottimo PerfectCut, WPS Optimizer. Optimizers without this feature: Corte Certo, CutList, Cut Pro. (1332460 and 1979352)

Plugin IF-8500 and IF-850 Plus
1. Added machining commands for Inmes machines in the .PZA. file. For more information, click here e here. (1771646)

And for more information on possible situations solutions, click aqui.

Plugin ERP and Insight
1. Added new tags to the Integration XMLs - FileCreation and AssistanceOrder. The MarginRedefinition tag has been renamed to Redefinition. For more information, click here and here.

Integrators Default ERP, Insight and Promob ERP
1. Created a configuration in some integrators to consider the system number in the calculation of the hash of the items. For more information click here. (2068043)

Plugin Raizen Vision TAF Router
1. Added a new machine plugin, the Raizen Vision TAF Router plugin. For more information, click here.

Plugin Raizen Solid DSP Router
1. Added a new machine plugin, the Raizen Solid DSP Router plugin. For more information, click here.

Plugin HuaHua SKH612
1. Added a new machine plugin, the Huahua SKH612 plugin - Drilling Center. For more information, click here.

Plugin Cut Pro
1. Created a feature to process material attributes for aluminum profiles sent to Cut Pro. For more information, click here. (1847103)

Plugin PTP 160

1. Added multiple process tool selection function for PTP 160. Now, when configuring the machine, users can select multiple process tools by clicking the checkbox to the left of each available tool. This improvement allows a more flexible selection of tools, simplifying the configuration process, especially on machines that support this functionality. For more information about the machine, click here. (2084059)

selacao-multipla-ferramenta-PTP160[mensagem-nao-permite-selecionar][en].png

Corrections

Builder Tab

1. Added an alert to the Clear Operations button on the Catalog Builder tab, indicating that it is not a reversible operation.

limpar-operacoes[en].png

ERPs configurations

1. Corrected the situation in which the password was not requested to edit fields in the configuration of ERPs integrators.

Machine Configuration

1. Corrected the situation where the minimum values of restriction of the milling cutter diameter of the machines generated nonconformities. (2090535)

Technical Drawing

1. Fixed the situation that occurred when trying to locate the folder if the user selected it and deleted it when generating a technical drawing.

Integration with Cut Plan

1. Fixed the situation that occurred when trying to send items that are not modules to Cut Pro when the option to generate a module drawing was activated.

Machine Integration

1. Fixed the situation where the Y restriction for slots was not taken into account in Weeke plugins. (2030857)

Plugin Rover 1332

1. Corrected the situation of the zero points in the Rover A 1332 Plugin, where inverted holes were occurring. (2086308)

Plugin Skipper 100

1. Corrected the situation in the Skipper 100 Plugin where the tool per process was not taken into account. (2086458)

Plugin NCG3021L

1. Fixed the situation where, when changing the integration system of the Nanxing NCG3021L, the profile processes still remained marked. (2097559)

Plugin Rover 22

1. The machining operations have been adjusted to Pan format. (2094064)

Plugin Skipper 100 e Skiper 130

1. Corrected the situation restricting the 35mm Y holes in the Skipper 100 and Skipper 130 plugins. (2096758)

Nesting Programs

1. Corrected the overcut configuration of the parts so that it is generated correctly in the Nesting program. (2098266)

Report

1. Corrected the situation in which the assembled items report was not generated. (2100194)

▼ 1.60.21.3

Date: 02/23/2024

Released Plugins

Plugin AES Go 1300: 1.60.21.3
Plugin Alca AL1200D: 1.60.21.3
Plugin Ardis Cutting Optimizer: 1.60.21.1
Plugin BHX055: 1.60.21.3
Plugin BHX500: 1.60.21.3
Plugin Builder: 1.60.21.3
Plugin Builder Budget: 1.60.21.2
Plugin Builder Catalog: 1.60.21.2
Plugin Builder Parts: 1.60.21.3
Plugin Builder Xml: 1.60.21.3
Plugin CMS Maxima 24B: 1.60.21.3
Plugin Corte Certo: 1.60.21.1
Plugin Cut List: 1.60.21.1
Plugin Cut Pro: 1.60.21.3
Plugin Cyflex S e SR: 1.60.21.3
Plugin Delta D3020 Mach3 Router: 1.60.21.3
Plugin ERP Insight: 1.60.21.2
Plugin ERP Promob: 1.60.21.2
Plugin ERP Standard: 1.60.21.2
Plugin ERP WPS: 1.60.21.1
Plugin Evolution 7405: 1.60.21.3
Plugin Excitech EHSW1228: 1.60.21.3
Plugin Flexdrill 1000: 1.60.21.2
Plugin Flexdrill 612 KS: 1.60.21.3
Plugin Giben Flexdrill 6 1000 Evo: 1.60.21.1
Plugin GPlan: 1.60.21.1
Plugin Holzher Evolution 7401-7402: 1.60.21.3
Plugin IMA BIMA: 1.60.21.3
Plugin IMA Imagic: 1.60.21.3
Plugin Integração Promob ERP Start: 1.60.21.2
Plugin Klipper RSL Taiwan Baoyuan Router: 1.60.21.3
Plugin Morbidelli M100: 1.60.21.3
Plugin Morbidelli P800: 1.60.21.3
Plugin Morbidelli UX100: 1.60.21.2
Plugin Nanxing NCB612: 1.60.21.2
Plugin Nanxing NCG3021L Nesting: 1.60.21.2
Plugin Ottimo-Perfect Cut: 1.60.21.1
Plugin PTP 160: 1.60.21.1
Plugin Rhino RMC 3000 Plus DDCS Router: 1.60.21.3
Plugin Router Aspan: 1.60.21.3
Plugin Router EnRouter CNC: 1.60.21.3
Plugin Rover A 1332: 1.60.21.3
Plugin Rover A 1532: 1.60.21.3
Plugin Rover A 3.30: 1.60.21.1
Plugin SARTWOOD PT6: 1.60.21.2
Plugin SCM Pratika 1000: 1.60.21.3
Plugin Skipper 100: 1.60.21.2
Plugin Skipper 130: 1.60.21.2
Plugin SOPH MSZ600: 1.60.21.3
Plugin Speedy Factory: 1.60.21.1
Plugin Startech: 1.60.21.2
Plugin Venture 108: 1.60.21.3
Plugin Venture 1M: 1.60.21.3
Plugin Venture 230M: 1.60.21.3
Plugin Venture 2M: 1.60.21.3
Plugin Venture 316: 1.60.21.3
Plugin Venture 3M: 1.60.21.3
Plugin Venture 8M: 1.60.21.3

Enhancements

Flexdrill 6 1000 Evo

1. Added saw operation in the profile and adjusted the saw registration in the milling head. For more information, click here. (1998905 and 2053949)

ERP Integration

1. Created option that defines whether the quote processing step will be carried out during the generation of the ERP integration documentation. If the Process prices field is checked, the quote is processed normally and the prices are displayed in the integration XML (current behavior). If the option is unchecked, the quote is not processed and the integration XML displays zero values. For more information click here.

04 - Field EN.png

Machine Program

1. In the Nanxing NCG3021L Plugin, the .CSV and .MPR template has been reinstated for the extension of the generated file, and the XML template has been added. For more information click here. (2065934)

New Plugins

1. New Plugin AES Go 1300 machine plugin made available. For more information click here.

2. New Plugin Rhino RMC 3000 Plus DDCS Router machine plugin made available.

3. New Plugin Klipper RSL Taiwan Baoyuan Router machine plugin made available. For more information, click here.

Builder Plugin

1. Added a new atributte (GETBUILDERMODEL) for master records that do not follow the standard master record, so that it is possible to search for material information. For more information click here. (2050736)

Plugin Insight, Plugin Promob ERP e Plugin Promob Start

1. Added budget information to the ERP integration Xml. The tags added were: PRICE, IDCATEGORY, IDPRICEPROVIDER, REPETITION, UNIT and MARGINREDEFINITION. For more information click here.

General Options

1. Option created in the Builder General Settings to associate the unique part ID with the part description. (2068043)

Plugin NCB12

1. It is now possible to register saws in the NCB612 Plugin. For more information click here.

Reporting Plugins

1. Added a validation when generating Builder reports when the project is a Technical Assistance project, displaying a warning message when there are no items to generate the report due to the Technical Assistance plugin rules.

Machine

1. New settings have been added to indicate the minimum/maximum position of the center of the horizontal holes opposite the Y axis of the bottom face, in order to prevent the parts from rotating, on the following machines:

Homag

Alca AL 1200D

Excitech

E42128D e EHSW1228

Soph

MSZ600C

Starwood

PT6

Week

ABL210B

BHX 055

BHX 500

BP195T

DRILLTEQ V-200

PTP 160

Venture 1M

Venture 2M

Venture 3M

Venture 8M

Venture 108M

Venture 230M

Venture BMG 300

Venture 316

Corrections

Parts Plugin Builder

1. Fixed the situation where the form change was not saved. (2072740)

2. Fixed the situation where the Create Part from Composition option did not work correctly. (2075365)

3. Adjusted the creation of machining operations for integrations via XML. (2082510)

4. Corrected the situation in which a non-conformity was displayed when accessing Registration - Builder - Operations budget registration, for which validation was adjusted on the operations budget registration screen. (2084463)

5. Fixed the situation where after applying the borders and choosing Layer = BORDER, the border was visually displayed on the Builder Parts screen, but when inserting the part into the 3D Environment, the edge band was not displayed. And when accessing Builder Parts Part Edit again, the inserted border was no longer on the part. For this reason, the application of borders to the part was adjusted. (2085183)

6. Corrected the situation in which, when editing parts with the Builder Parts plugin, the graphic representation of the parts was incorrect, this happened when there was a meeting of slots or machining operations. And in the cutting plane, the representation of the slots was in positions that were not consistent with what had been edited. To this end, the comparison of points that affected the graphic representation of the parts was adjusted. (2087268)

7. Corrected situation in which the composition pieces did not change their measurements. (2059651)

Builder Plugin

1. Fixed the situation in which a non-conformity was displayed when generating a budget with operations. (2085000)

2. Added setting to adjust the start point of rectangular and circular machining operations. (2076998 and 2077918)

3. Added setting to take tools into account when calculating slot displacement (101430 and 2086135)

Giben Flexdrill 612KS Plugin

1. Adjusted the sending of parameters for creating the machine program. (2086120)

Rover A3.30 Plugin

1. Corrected the situation in which the compensation alignment in machining operations was incorrect on the Rover A3.30 machine. (2056470)

2. The Source Position setting was not available for adjustment on the Rover A3.30 machine. (2069631)

3. Adjusted to correctly send the tool code to the machine program generation service.

Alca AL2030 3S Plugin

1. The Nesting programs did not correctly execute the Cutting Plane Alignment setting configured in Setup. (2073985)

Skipper 100 Plugin

1. Corrected situation that restricted some holes unduly. (2082614 and 2082614).

BHX 055 Plugin
1. Corrected situation that restricted drilling in the profile face unduly. (2083755)

Machine Program

1. Corrected the situation in which the offset information was not added to the calculation. (2086990)

PTP 160 Plugin

1. Corrected the situation in which the .cnc files in Promob stopped in the middle of the part, and it was necessary to complete the work manually to return to the starting position. To do this, the program was set to output the X value of the head registered in the setup of the PTP 160 machine. (2086377)

Rover 22 Plugin

1. Adjusted the Mill Alignment so that they are generated as registered on the mill in Pan Format.

2. Adjusted the circular, rectangular, in-line and external machining operations so that they are generated correctly in Pan format.

Cutting Plan Preview

1. Adjusted the situation in which the preview of the cutting plane was generated differently from the Nesting program.

Cutting Plan

1. Adjusted the situation in which part contours were not generated when there was more than one condition with the same tool.

Cut Pro Plugin

1. Fixed the situation where, when sending designs to its Cut Pro Plugin, the sending time was longer than expected and Promob sometimes closed unexpectedly. To do this, the setting Save label images when generating files for Cut Pro has been adjusted (2045679).

SCM X200 CELL Plugin

1. Fixed the command in the SCM X200 CELL Plugin in which the double-pass command was automatically marked. (2073999)

Pratika 320 Plugin

1. Fixed the double step command being duplicated in the Pratika 320 Plugin. (2072524)

▼ 1.60.21.2

Date: 01/23/2024

Enhancements

Builder Catalog

1. Added the option to Process Budget, making it possible to define that dynamic structures display the Structures Configured information in the XML of Insight, Default, and Promob ERP. For more information, click here and here. (2007585)

04 - Field EN.png

2. Created the option for selecting multiple edge structures that adapt to a predefined condition. For more information, click here. (2043245)

GIF EN.gif

Plugin UX100

1. Added to the Setup settings of the UX100 plugin the option Hole safety quota (mm) to configure the value of the safety quota for holes. For more information click here.

Plugin Skipper100 e Skipper130

1.The option Evaluate part minimum width for slot operation with saw has been added to the Skipper100 and Skipper130 machine plugins. For more information click here. (2022609)

News Plugins

1. New machine plugin available Plugin Venture BMG 300.

Plugin MSZ600 e Plugin BHX055

1. Added the option to Detail operations in all programs on the MSZ600 Plugin and BHX055 Plugin machines to the Setup screen. For more information click here and here. (2060834)

Builder Parts

1. Added default value for machining and drilling.

Corrections

Plugin Builder XML

1. Fixed the situation in which process machining operations were not generated with the XML Builder Plugin. (2068654)

2. Corrected the situation in which the name ORTOGONAL MACHINING was generated instead of MACHINING. (2069127)

3. Corrected the situation when generating unnecessary auxiliary machining operations when the Direct alignment option was selected. (2069127)

4. The situation of duplication in machinings with Insight integration has been corrected. (2055221)

5. Corrected the situation of duplicate machining operations with registered processes. (2063130)

Machine Programs

1. Corrected the situation in which the machines did not discount the overcut when the Nesting with Promob Cutting Engine option was selected. (2059274)

2. Corrected the situation where parts were unduly duplicated in the cutting plane. (2062831)

3. Corrected the situation where contact machining on items/walls with a slope had the wrong orientation in the machine programs. (2065742)

Setup

1. Corrected the situation in which the selected tool was not used in the program. (2065842)

Plugin Flexdrill 612KS

1. Corrected the situation in which machining was not generated for the FlexDrill 612KS machine due to the rotation of the workpiece. (2069499)

Plugin MSZ600

1. Corrected the situation in which a second program was improperly generated. (2062976)

Plugin Builder

1. Fixed the situation where operations in contact with open doors/drawers in the 3D Environment were rotated in the machine programs. Now doors/drawers will remain closed when exporting files in Builder Plugins. (2037212)

Plugin Starwood PT6

1. Corrected the situation where the part orientation command in WoodWop was incorrect for the Starwood PT6 machine. (2065170)

Plugin Ima Imagic
1. Corrected the situation in which the Restriction of minimum position of top holes was not considered as configured. (2069368)

Plugin BHX055

1. Corrected the situation in which some slots were not sent to the CNC program. (2071459)

Plugin EnRoute

1. The situation where Nesting files did not consider thickness separation when the configured decimal separator was a comma has been corrected. (2064721)

▼ 1.60.21.1

Date: 11/30/2023

Enhancements

Machine Configuration

1. Created a new Excitech E42128D machine. For more information, click here.

2. Option added to convert holes into circular machining on the ISO Code machine. For more information, click here. (2016995 and 2031585)

CNC Plugin

1. The Nanxing NCB2412S / NCB612DT / NCB612T plugin has been renamed to Nanxing - NCB612, and it will now only support this machine model. For more information, click here.

2. New Nanxing machine plugin available - NCB2412 For more information, click here.

3. New SCM Pratika 280 machine plugin available. For more information, click here.

Corrections

Machine program

1. Fixed the situation where machining did not occur in the program when it was rotated at angles other than 90°. (1952215)

2. Corrected the situation in which, when opening the machine settings, it was not possible to configure the label format in the Full label field and the message Errors occurred when validating the settings. (2054894)

3. Corrected the situation in which Program B was generated unnecessarily on Weeke machines - Homag. (2056999)

4. Corrected the situation in which Program B and C were generated unnecessarily on the IMA Imagic machine. (2059043)

5. Corrected the situation in which a file with grouped machine programs was not generated, on the Startech CN V. machine (2060061)

6. Corrected the situation where Profile Operations were on mirrored faces on the X200 Cell machine (2060772).

7. Corrected the situation in which the programs were generated incorrectly, for which the treatment was carried out to match the default values of properties through the versions. (2044474)

8. Adjusted contour machining operations that were generated incorrectly in the machine programs. (2050005)

9. Created a field in the Setup to enable milling cutter height validation, and added the validation. (1471533)

Builder Parts

1. Fixed the situation where holes were not displayed in the Budget even when registered correctly in Builder Parts. (2012475)

2. Fixed the situation where Builder Parts displayed an unconformity when creating a part from a selected geometry in the environment. (2056709)

3. Fixed the situation where Builder Parts did not load saved pieces online. (2056885)

4. Fixed the situation where operations of pieces created with Builder Parts were interchanged between them. (2048418)

Budget

1. Corrected the situation in which the prices of operations were not displayed in the budget. (2024098)

Profile report

1. Fixed the situation where the Observations field was not displayed in the reports if it was registered with the singular name; now the field accepts both singular and plural. (2048896)

Builder XML Plugin

1. Fixed the situation where the Builder XML plugin loaded the slot information incorrectly. (2052070)

Technical drawing

1. Corrected the situation in which large cabinets were incorrectly positioned in the technical drawings. (2046297)

ERP Integration

1. Fixed the situation in which Dynamic Machines did not generate the programs in the folder selected in the integration with Insight. (2055569)

Budget Xml
1. Removed OPERATIONSWRAPPER tag from budget xml. (1960735)

Giben Flexdrill 612KS

1. Adjusted the restriction that was causing the creation of two programs improperly. (2048250)

Creator 950

1. Adjusted the validation and display of the Minimum Width field in the Setup. (2049665)

Giben Flexdrill 1200

1. Fixed the process of generating the contour command, which used to lose points and generate a diagonal line. (2055709)

Plugin Cyflex 900

1. Fixed the situation where an unconformity was displayed when generating documentation for pieces with aluminum on machines without a milling cutter. (2065102)

▼ 1.60.21.0

Date: 11/01/2023

Enhancements

Machine Programs

1. Implementing the plate number in the cutting programs, for example: Board X (where X represents the corresponding board, numbered 1 to 2, 3, etc.), followed by the Name of the material and the tool. (2002120)

EXAMPLE

MicrosoftTeams-image (4).png

Corrections

Builder tab (Catalog)

1. Fixed the situation where it was not possible to select one of the edges of a part, now all edges can be selected. (1958436)

Builder Parts

1. Fixed the situation where the Dimension attribute of the library was not sent, resulting in an exception when editing parts with Builder Parts. (2047840)

2. Fixed the situation where machining processes created with Builder Parts were not saved. (2047860)

CNC Configuration

1. Fixed the situation where the Help button on the label editing screen did not redirect to the link to the article on complete labels in the Promob knowledge base. (2042456)

Machine Programs

1. Made adjustment in the validation of aluminum components to allow the display of items, even when there is no presence of aluminum. (2050755)

Plugin Flexdrill 6 1000 Evo

1. Fixed the situation where the slot command was changed from line to path in a fixed way. It is now possible to set the machine configuration as the slot generation format to line.(2040068)

2. Fixed the situation that occurred when generating the slot, when the length was higher than that defined in the project. (2045120)

3. Removed the inverted pass when generating the machine program. (2043548)

4. Fixed the situation where a Blind Corner was created in a machining operation that was supposed to be an arc at the corners. It is now possible to set the machine configuration as the slot generation format for the line. (2043063)

Plugin KN3710

1. Made an adjustment during the generation of slots, creating a specific type of export for this machine. (2045041)

2. Adjusted the type of tool to be displayed in the tool view when linking with the process. (2042013)

Plugin Nanxing NCG3021L

1. Performed the migration of the system to the cloud machine generation service. The option of generating extensions .mpr and .csv has been removed, implementing the option of .xml, which is generated in Nanxing’s .scx standard. (2036502)

Plugin Nanxing NCB2412S / NCB612DT / NCB612T
1. Fixed a situation where the Define Tool field was not saved. (2052654)

Plugin Giben Flat (BDT - Spectra) and Plugin Giben Flat (Selexx - P. Line - Stratos)

1. Added an option to configure the columns in the nesting file. (1994419)

Plugin Skipper 100 and 130

1. Fixed the situation in which the clamp was not considered for non-through slots. (2023554)

CNC Report

1. Fixed the situation in the CNC report where only the first occurrence not associated with a generated program was displayed. Now, all occurrences are displayed. (2016310)

XML Integration

1. Fixed the situation where machines containing the name Nesting generated the TYPE field in the integration XML only as Nesting, ignoring the profile and parts. (2045669)

▼ 1.60.20.3

Date: 10/11/2023

Enhancements

Opening the System

1. Added validation of Builder DLLs when opening the system. For more information, click here.

CNC Configuration

1. Added the option of inclined saw and/or inclined milling cutter in process slots for Venture machines (108M, 11x, 1M, 230M, 2M, 3M and 8M). (2017098)

2. Created a new option in the configuration CNC Builder XML that defines the Alignment of the tool (only for INSIGHT integration). For more information, click here.

3. Added option for two passes of a part, which considers pieces with one side equal to or smaller than the value entered in the field. For more information, click here. (1957770)

4. Added column selection option in the File menu for Giben Flat (BDT - Spectra) and Giben Flat (Selexx - Professional Line - Stratos) machines. (1994419)

MicrosoftTeams-image (91).png

5. Added new CNC settings, as detailed below:

Initial distance in Z for entry (numerical value).
Z axis input speed (numerical value).
Option to remove the S_A="STANDARD" command (checkbox).

These settings have been implemented on the machines listed below:

Plugin for Machine Weeke | Homag Alca AL1200D. For more information, click here.
Plugin for Machine Weeke | Homag BHX-055. For more information, click here.
Plugin for Machine Weeke | Homag BHX-500. For more information, click here.
Plugin for Machine Weeke | Homag Drillteq V200. For more information, click here.
Plugin for Machine Weeke | Homag Starwood PT6. For more information, click here.

Integrator Configuration

1. Removed the configuration for saving the .promob file, and now all designs are saved in the cloud service in Integration. For more information, click here.

ERP integration

1. Created new tags in the XMLs the integration with Promob ERP and ERP Start:

ADDITIONALINFORMATION - additional data
CUSTOMERADDITIONALINFORMATION - customer data. For more information, click here.

Plugin CNC

1. Added plugin for machine Morbidelli P800. For more information, click here.

2. Added plugin for machine Excitech EHSW1228. For more information, click here.

3. Added plugin for machine RMC 3000 Absolute ATC Mach3 Router. For more information, click here.

4. Added plugin for machine Raizen Solid TAF Router. For more information, click here.

Plugin Builder XML

1. CNC program generation for aluminum profiles implemented. For more information, click here. (1942269)

Machine Program

1. Added an option to specify the minimum area of the part to be considered in the Cut Plan and Nesting. (1954953)

Cut Plan

1. Now, the machining operations are displayed in the Cut Plan PDFs. (1994658)

Corrections

Program Files

1. Corrected the situation in which the change in machine alignment resulted in the absence of values in the XCUT and SIMMETRY fields. (2046540)

Builder Parts

1. Fixed the situation where a inconformity was generated when trying to edit/create parts with Builder Parts. (2028375)

2. Fixed the situation where an inconsistency occurred in the edge tapes when creating parts in Builder Parts. (1997096)

CNC Configuration

1. Fixed the situation where, if the part presented profile machining, when selecting a conical cutter to perform the operation, the part was not produced. (2015686)

2. Fixed the situation where when opening the machine settings screen, some CNC Vision properties were reset to the default setting. (2037528)

Label

1. Adjusted the validation of the label size calculation to ensure that it fits properly on the sheet or coil. (2034412)

2. Removed minimum label size restriction, now allowing customization with smaller sizes. (2018870)

Importing settings

1. Corrected the situation related to importing Builder backups with accented characters in the name. (1957809)

2. Corrected the situation related to importing plugin settings. (2033837)

Cut Pro Integration

1. Corrected the situation related to importing observations with multiple lines in the integration with CutPro.

ERP Integration

1. Corrected the situation of slow execution of the integration with the ERP. (2011772)

Technical Drawing

1. Corrected the situation in which the hardware was zeroed out in the technical drawing. (2043642)

Machine Program

1. Corrected the situation in which the overcut in Y was not saved correctly. (2028548)

2. Adjustment made to the Compensation Alignment of the parts in the Nesting programs. (2033209)

3. Corrected the situation in which the direction of rotation of the milling cutter was incorrect when creating Machine Programs. (2023016)

Plugin CNC

1. Corrected the situation in which the CNC Program Generation Report caused an inconsistency when generating the program. (1999830)

2. Corrected the situation in which Plugin BHX055 did not link parts. (2012313)

Plugin Builder XML

1. Corrected the situation in which machining operations and slots in the profile were generated incorrectly. (1991183)

Plugin ERP
1. Corrected the situation in which the XML creation did not include the CODIGO="CNCPROGRAM1" tag, resulting in the part's technical drawing not being associated. (2037845)

Plugin Spazio 3D

1. Corrected the situation in which the machining commands were incorrect on the PXF Spazio3D machine. (2014919)

Plugin UX100

1. Corrected a situation in the Morbidelli UX100 Plugin where the zero points of each face were not correctly included when the program was generated by Maestro. (2033444)

Plugin Weeke | Homag

1. Corrected the situation in which profile slots were generated with incorrect commands and tools on Homag/Weeke machines. (2023437)

2. Corrected a situation in which in-line machining operations were interpreting the ZA command as the depth of the operation, when in fact it refers to the difference between the thickness of the part and the depth of the operation. (2039139)

Pratika 315 e 325

1. Fixed the situation where conical tools were not imported correctly when importing tools. (2032037)

2. Fixed the situation where parts were generated with incorrect vein information in the Nesting file. (2039908)

Plugin IMA Imafic

1. Corrected the situation in which some programs were not generated due to some restrictions being considered incorrectly. (2043086)

▼ 1.60.20.2

Date: 08/21/2023

Released Plugins

Plugin ABL 210 - B : 1.60.20.1

Plugin Accord 40 FX : 1.60.20.1

Plugin Alca AL1200D : 1.60.20.1

Plugin Author200 : 1.60.20.1

Plugin Author327 : 1.60.20.1

Plugin Author436S : 1.60.20.1

Plugin Author500 : 1.60.20.1

Plugin AuthorM600 : 1.60.20.1

Plugin BHX055 : 1.60.20.1

Plugin BHX500 : 1.60.20.1

Plugin Biesse Rover 22 : 1.60.20.1

Plugin Biesse Rover 24 : 1.60.20.1

Plugin BP 195T : 1.60.20.1

Plugin Builder : 1.60.20.2

Plugin Builder Budget : 1.60.20.2

Plugin Builder Parts : 1.60.20.2

Plugin Builder Xml : 1.60.20.1

Plugin CMS Maxima 24B : 1.60.20.1

Plugin Cut Pro : 1.60.20.1

Plugin Cyflex 900 : 1.60.20.1

Plugin Cyflex 900BR : 1.60.20.1

Plugin Cyflex HP - CX200 : 1.60.20.1

Plugin Cyflex S e SR : 1.60.20.1

Plugin DRILLTEQ V-200 : 1.60.20.1

Plugin Easy Jet : 1.60.20.1

Plugin Evolution 7405 : 1.60.20.1

Plugin Format4 Profit H80 : 1.60.20.1

Plugin Giben Genesis EVO : 1.60.20.1

Plugin Holzher Evolution 7401-7402 : 1.60.20.1

Plugin Homag Weeke ABD 100 : 1.60.20.1

Plugin Homag Weeke ABD 250 : 1.60.20.1

Plugin IMA BIMA : 1.60.20.1

Plugin IMA Imagic : 1.60.20.1

Plugin Integração Promob Production : ...1

Plugin ISO Code : 1.60.20.1

Plugin KN3710 Nesting : 1.60.20.2

Plugin M400F : 1.60.20.1

Plugin Morbidelli M100 : 1.60.20.1

Plugin Morbidelli UX100 : 1.60.20.1

Plugin Nanxing NCB2412S : 1.60.20.2

Plugin Pratika 310 : 1.60.20.1

Plugin Pratika 315 : 1.60.20.1

Plugin Pratika 320 : 1.60.20.1

Plugin Pratika 325 : 1.60.20.1

Plugin PratixS : 1.60.20.1

Plugin Router Aspan : 1.60.20.1

Plugin Router EnRouter CNC : 1.60.20.1

Plugin Rover A 1532 : 1.60.20.1

Plugin Rover A 1542 : 1.60.20.1

Plugin Rover A 1625-1632-1643-1659 : 1.60.20.1

Plugin SARTWOOD PT6 : 1.60.20.1

Plugin SCM Pratika 1000 : 1.60.20.1

Plugin SCM Startech cn plus : 1.60.20.1

Plugin Skipper 100 : 1.60.20.1

Plugin Skipper 130 : 1.60.20.1

Plugin SOPH MSZ600 : 1.60.20.2

Plugin Tech Z1 : 1.60.20.1

Plugin Tech Z2 : 1.60.20.1

Plugin Tech Z25 : 1.60.20.1

Plugin Tech Z30 : 1.60.20.1

Plugin Tech Z5 : 1.60.20.1

Plugin Uniflex : 1.60.20.1

Plugin Universal NB-3618 : 1.60.20.1

Plugin Universal NB-3622 : 1.60.20.1

Plugin Universal TV 3615 : 1.60.20.1

Plugin Venture 108 : 1.60.20.1

Plugin Venture 1M : 1.60.20.1

Plugin Venture 230M : 1.60.20.1

Plugin Venture 2M : 1.60.20.1

Plugin Venture 316 : 1.60.20.1

Plugin Venture 3M : 1.60.20.1

Plugin Venture 8M : 1.60.20.1

Plugin X200 CELL - Nesting : 1.60.20.1

Enhancements

CNC Plugin

1. General improvements have been made in the processing of machine programs using cloud services.

2. Added the option for Tool Change via magazine, allowing the sending of different commands according to the Nanxing machines NCB2412S / NCB612DT / NCB612T. (2019659)

Corrections

Skipper 100 and Skipper 130 Plugin

1. Corrected the situation where the Symmetry option in the Setup did not affect the results of programs on the Skipper 100 and Skipper 130 machines. (2020398)

CNC Plugin

1. Corrected a situation in which selecting the Generate Complete Label option caused nonconformities. (2023294, 2007373)

Rover A 1542 Plugin

1. Adjusted the machining with CIX command for the Biesse Rover A 1542 machine. (2015170)

▼ 1.60.20.1

Date: 08/01/2023

Released Plugins

Plugin Builder : 1.60.20.1

Plugin Builder Budget : 1.60.20.1

Plugin Builder Parts : 1.60.20.1

Plugin Giben Flexdrill 6 1000 Evo : 1.60.20.1

Plugin Integração Promob ERP Start : 1.60.20.1

Plugin KN3710 Nesting : 1.60.20.1

Plugin Nanxing NCB2412S : 1.60.20.1

Plugin Nanxing NCG3021L Nesting : 1.60.20.1

Plugin SOPH MSZ600 : 1.60.20.1

Enhancements

Machine Registration

1. Added plugin for Giben KN3710 Machine. (1965796)

Machine Programs

1. Added parameter 109 to the MSZ600C Machine for the slot, allowing the customer to choose their preferred option in the machine settings. For more information, click here.

Machining

1. In the Giben Flexdrill 6 1000 Evo Plugin, in CNC settings (milling/slots with milling cutter), an option for path machining was created, enabling tool change through a command for this purpose. (1968159)

Corrections

Builder Parts

1. Fixed situations involving part replacement when creating them with Builder Parts. (1989694)

Machine Programs

1. Adjusted to follow the prioritization order of operations with processes as registered in the machine settings. (2003911)

2. Fixed an issue where the project observation field was not included in the .csv file when selecting Maestro 22 and/or Maestro 14. (2008958)

3. Corrected a situation where the Nanxing NCB2412S Plugin was not respecting the prioritization of the Upper Head. (2011158)

4. Corrected a situation in the Venture 8M Plugin where some machining processes were not being generated in the CNC program. (2012351)

ERP Integration

1. Fixed a situation where the Drawing tag was not being generated for some items in the XML of the Promob ERP Plugin. (2008878)

Nanxing Plugin

1. Fixed a situation where the Nanxing NCB2412S / NCB612DT / NCB612T Plugin was not saving the configuration. (2010199)

Technical Drawing

1. Fixed a situation where the Technical Drawing of cabinets was being generated with the Rear View instead of the front view. (2010582)

2. Corrected the situation where the hardware fittings were not being included.

CNC Settings

1. Fixed the situation in the Giben Flexdrill 6 1000 Evo Plugin where the contour machining start settings were not being saved after modification. (2011860)

▼ 1.60.20.0

Date: 05/07/2023

Released Plugins

Plugin ABL 210 - B : 1.60.20.0

Plugin Accord 40 FX : 1.60.20.0

Plugin Alca AL1200D : 1.60.20.0

Plugin Alca Machine Router AL2030 3S : 1.60.20.0

Plugin Alca Machine Router AL2030 ATC : 1.60.20.0

Plugin Alca Maquinas AL2030B : 1.60.20.0

Plugin Application of laminates per module report : 1.60.20.0

Plugin Ardis Cutting Optimizer : 1.60.20.0

Plugin Asia Robotica CN1325 ATC Router : 1.60.20.0

Plugin Assembly Report : 1.60.20.0

Plugin Assembly Steel Report : 1.60.20.0

Plugin Author200 : 1.60.20.0

Plugin Author327 : 1.60.20.0

Plugin Author436S : 1.60.20.0

Plugin Author500 : 1.60.20.0

Plugin AuthorM600 : 1.60.20.0

Plugin BHX050 : 1.60.20.0

Plugin BHX055 : 1.60.20.0

Plugin BHX500 : 1.60.20.0

Plugin Biesse Comil Insider FT2 : 1.60.20.0

Plugin Biesse EKO 902 : 1.60.20.0

Plugin Biesse FTT : 1.60.20.0

Plugin Biesse Rover 22 : 1.60.20.0

Plugin Biesse Rover 24 : 1.60.20.0

Plugin Biesse Rover A4 : 1.60.20.0

Plugin Biesse Rover B7 : 1.60.20.0

Plugin Biesse Skill 300 K3 : 1.60.20.0

Plugin BMG110 - Venture 113-114-115 : 1.60.20.0

Plugin Boole Opticut Optimizer : 1.60.20.0

Plugin BP 195T : 1.60.20.0

Plugin Builder : 1.60.20.0

Plugin Builder Budget : 1.60.20.0

Plugin Builder Catalog : 1.60.20.0

Plugin Builder Parts : 1.60.20.0

Plugin Builder View : 1.60.20.0

Plugin Builder Xml : 1.60.20.0

Plugin Buselatto Jet Optima A20-C20-C21 : 1.60.20.0

Plugin C-Express 920 : 1.60.20.0

Plugin CMS Maxima 24B : 1.60.20.0

Plugin Composed Panel Report : 1.60.20.0

Plugin Corte Certo : 1.60.20.0

Plugin CRS Exata Horizontal - Drilling Center : 1.60.20.0

Plugin CRS Exata Vertical 1000 - Drilling Center : 1.60.20.0

Plugin CRS Exata Vertical 1200 - Drilling Center : 1.60.20.0

Plugin Cut List : 1.60.20.0

Plugin Cut Planning : 1.60.20.0

Plugin Cut Pro : 1.60.20.0

Plugin Cut Rite : 1.60.20.0

Plugin Cyflex 900 : 1.60.20.0

Plugin Cyflex 900BR : 1.60.20.0

Plugin Cyflex H800 : 1.60.20.0

Plugin Cyflex HP - CX200 : 1.60.20.0

Plugin Cyflex S e SR : 1.60.20.0

Plugin Door Report : 1.60.20.0

Plugin Drawer Report : 1.60.20.0

Plugin DRILLTEQ V-200 : 1.60.20.0

Plugin Dynestic 7516 : 1.60.20.0

Plugin Easy Jet : 1.60.20.0

Plugin Easynest 3018 A : 1.60.20.0

Plugin Easynest 3021 : 1.60.20.0

Plugin Easynest 4021 : 1.60.20.0

Plugin Edge Band Report : 1.60.20.0

Plugin ERP Focco : 1.60.20.0

Plugin ERP Insight : 1.60.20.0

Plugin ERP Promob : 1.60.20.0

Plugin ERP Standard : 1.60.20.0

Plugin ERP WPS : 1.60.20.0

Plugin ETools Pro ATC 12 2030 Router : 1.60.20.0

Plugin Evolution 7405 : 1.60.20.0

Plugin F9L : 1.60.20.0

Plugin Felder Creator 950 : 1.60.20.0

Plugin Flexdrill 1000 : 1.60.20.0

Plugin Flexdrill 1200 : 1.60.20.0

Plugin Flexdrill 612 KS : 1.60.20.0

Plugin Flexdrill 612 M : 1.60.20.0

Plugin Flexdrill 61200 : 1.60.20.0

Plugin Format4 Profit H08 : 1.60.20.0

Plugin Format4 Profit H20-H22-H22L : 1.60.20.0

Plugin Format4 Profit H80 : 1.60.20.0

Plugin Giben Flat (BDT - Spectra) : 1.60.20.0

Plugin Giben Flat (Selexx - Professional Line - Stratos) : 1.60.20.0

Plugin Giben Flexdrill 6 1000 Evo : 1.60.20.0

Plugin Giben Genesis EVO : 1.60.20.0

Plugin GPlan : 1.60.20.0

Plugin HG 2030 Master : 1.60.20.0

Plugin Hirzt F10 : 1.60.20.0

Plugin Hirzt F6 : 1.60.20.0

Plugin Hirzt F8 : 1.60.20.0

Plugin Holzer HHOS Optimizer Cut : 1.60.20.0

Plugin Holzher Evolution 7401-7402 : 1.60.20.0

Plugin Holzher Master : 1.60.20.0

Plugin Homag Weeke ABD 100 : 1.60.20.0

Plugin Homag Weeke ABD 250 : 1.60.20.0

Plugin IF-850 Plus : 1.60.20.0

Plugin IF-8500 : 1.60.20.0

Plugin IMA BIMA : 1.60.20.0

Plugin IMA Imagic : 1.60.20.0

Plugin Industrial CNC ARTISAN 408 Router Mach 2-3 : 1.60.20.0

Plugin Integração Promob ERP Start : 1.60.20.0

Plugin ISO Code : 1.60.20.0

Plugin Jaragua CNC Mobile Router 2818 : 1.60.20.0

Plugin Jaragua CNC Mobile TAF Router : 1.60.20.0

Plugin Jaragua CNC TAURUS 2818 : 1.60.20.0

Plugin Jaragua Compact EdingCNC Router : 1.60.20.0

Plugin JaraguaCNC Router Exclusive 28182 : 1.60.20.0

Plugin JaraguaCNC Solid : 1.60.20.0

Plugin JaraguaCNC Vision : 1.60.20.0

Plugin KN3710 Nesting : 1.60.20.0

Plugin Laguna SmartShop II Router - B.R : 1.60.20.0

Plugin Laguna SmartShop III Router - Fanuc : 1.60.20.0

Plugin Laguna SmartShop SUV Router - B.R : 1.60.20.0

Plugin Lepton Optimizer : 1.60.20.0

Plugin M400F : 1.60.20.0

Plugin Mach CNC MACHPRO ATC : 1.60.20.0

Plugin Mach CNC Router Elite Super Drill 2819 : 1.60.20.0

Plugin Mak Pro 3000 Mach3 Router : 1.60.20.0

Plugin Manufacturing Cabinet Report : 1.60.20.0

Plugin Manufacturing Component Report : 1.60.20.0

Plugin Marchiori LD 3000 Mach3 Router : 1.60.20.0

Plugin Master Drill TF 500 : 1.60.20.0

Plugin Masterwood Nesting MW : 1.60.20.0

Plugin MasterWood Project 415 : 1.60.20.0

Plugin MasterWood Project 465 : 1.60.20.0

Plugin Morbidelli M100 : 1.60.20.0

Plugin Morbidelli UX100 : 1.60.20.0

Plugin Nanxing NCB2412S : 1.60.20.0

Plugin Nanxing NCG3021L Nesting : 1.60.20.0

Plugin OMNICNC 1325 Router : 1.60.20.0

Plugin OptiPlanning : 1.60.20.0

Plugin Ottimo-Perfect Cut : 1.60.20.0

Plugin Point 2 : 1.60.20.0

Plugin Pratika 310 : 1.60.20.0

Plugin Pratika 315 : 1.60.20.0

Plugin Pratika 320 : 1.60.20.0

Plugin Pratika 325 : 1.60.20.0

Plugin PratixS : 1.60.20.0

Plugin Profile Report : 1.60.20.0

Plugin Project 250 : 1.60.20.0

Plugin Project 450 : 1.60.20.0

Plugin Project TF : 1.60.20.0

Plugin PTP : 1.60.20.0

Plugin PTP 160 : 1.60.20.0

Plugin Puchased Item Report : 1.60.20.0

Plugin Rhino RMC 3000 Absolute Mach3 Router : 1.60.20.0

Plugin RouSer Inspire 3S Router : 1.60.20.0

Plugin Router Aspan : 1.60.20.0

Plugin Router EnRouter CNC : 1.60.20.0

Plugin Rover A 1332 : 1.60.20.0

Plugin Rover A 1532 : 1.60.20.0

Plugin Rover A 1542 : 1.60.20.0

Plugin Rover A 1625-1632-1643-1659 : 1.60.20.0

Plugin Rover A 3.30 : 1.60.20.0

Plugin Rover C9 : 1.60.20.0

Plugin Rover K FT 1531 : 1.60.20.0

Plugin Rover1836GFT : 1.60.20.0

Plugin Rover20 : 1.60.20.0

Plugin Rover2231GFT : 1.60.20.0

Plugin SARTWOOD PT6 : 1.60.20.0

Plugin SCM Pratika 1000 : 1.60.20.0

Plugin SCM Startech cn plus : 1.60.20.0

Plugin SCM Startech cn v : 1.60.20.0

Plugin ShopSabre 4896 Router : 1.60.20.0

Plugin ShopSabre IS Series : 1.60.20.0

Plugin Sideco SIR 1325 ATC Router : 1.60.20.0

Plugin Skipper 100 : 1.60.20.0

Plugin Skipper 130 : 1.60.20.0

Plugin Skipper V31 : 1.60.20.0

Plugin SOPH MSZ600 : 1.60.20.0

Plugin Spazio3D : 1.60.20.0

Plugin Speedy Factory : 1.60.20.0

Plugin Startech : 1.60.20.0

Plugin Tech 99L : 1.60.20.0

Plugin Tech Z1 : 1.60.20.0

Plugin Tech Z2 : 1.60.20.0

Plugin Tech Z25 : 1.60.20.0

Plugin Tech Z30 : 1.60.20.0

Plugin Tech Z5 : 1.60.20.0

Plugin TekMaq 3020 Mach2 Router : 1.60.20.0

Plugin Twister750NX : 1.60.20.0

Plugin Uniflex : 1.60.20.0

Plugin Universal NB-3618 : 1.60.20.0

Plugin Universal NB-3622 : 1.60.20.0

Plugin Universal TV 3615 : 1.60.20.0

Plugin Usaberg ATC 2819 Router : 1.60.20.0

Plugin Usikraft Evoque 2030 ATC Router : 1.60.20.0

Plugin Vantage 24-25-26 series - Nesting : 1.60.20.0

Plugin Venture 107 : 1.60.20.0

Plugin Venture 108 : 1.60.20.0

Plugin Venture 1M : 1.60.20.0

Plugin Venture 22L : 1.60.20.0

Plugin Venture 230M : 1.60.20.0

Plugin Venture 2M : 1.60.20.0

Plugin Venture 316 : 1.60.20.0

Plugin Venture 3M : 1.60.20.0

Plugin Venture 8M : 1.60.20.0

Plugin Vetor Opus : 1.60.20.0

Plugin Vetor Opus 2030 FR Code : 1.60.20.0

Plugin Vetor Opus FR 3020 SP Router : 1.60.20.0

Plugin Vitap Point K2 : 1.60.20.0

Plugin Warehouse Report : 1.60.20.0

Plugin Weeke BHC280 : 1.60.20.0

Plugin Weeke BHT500 : 1.60.20.0

Plugin Weeke Optimat BHC250 : 1.60.20.0

Plugin WIBJ5 : 1.60.20.0

Plugin WPS Optimizer : 1.60.20.0

Plugin X200 CELL - Nesting : 1.60.20.0

Enhancements

Compatibility with Promob

1. Updated compatibility with version 5.60.20.0 or higher of Promob.

ERP Integration

1. Created the ImportKey tag in the integration XML for Default ERPs, Promob ERP, Promob ERP Start, Insight, and Speedy Factory, containing the import key for the Connect project. For more information, click here.

Corrections

Machine Program

1. Fixed the issue where pieces with fittings were causing smaller gaps than intended in the Inmes IF8500 Plugin. (2002438)

1. Fixed the issue where machinings with linked operations were not appearing in the machine program. (2005073)

Technical Drawing

1. Fixed the issue where the Use new processing engine for module technical drawings option was not staying selected. (2007773)

ERP Integration

1. Fixed the situation where the area validation was negative, causing an infinite loop for area validation. (1999165)

2. Fixed the situation where the integration XML was not displaying the Connect generation GUIDs when the project was saved but not reloaded. (2010636)

General Settings

1. Fixed the situation where the screen resolution in the general settings of the Builder was hiding the OK button. (2008369)

▼ 1.60.18.2

Date: 06/23/2023

Released Plugins

Plugin BHX055 : 1.60.18.2

Plugin Biesse Rover 22 : 1.60.18.2

Plugin Builder : 1.60.18.2

Plugin Builder Budget : 1.60.18.2

Plugin Builder Parts : 1.60.18.2

Plugin CMS Maxima 24B : 1.60.18.2

Plugin Cut Pro : 1.60.18.2

Plugin Cyflex S e SR : 1.60.18.2

Plugin Evolution 7405 : 1.60.18.2

Plugin Giben Genesis EVO : 1.60.18.2

Plugin Holzher Evolution 7401-7402 : 1.60.18.2

Plugin IMA BIMA : 1.60.18.2

Plugin Integração Promob Production : 1.11.7.2

Plugin Jaragua Compact EdingCNC Router : 1.60.18.3

Plugin Morbidelli M100 : 1.60.18.2

Plugin Morbidelli UX100 : 1.60.18.3

Plugin Nanxing NCG3021L Nesting : 1.60.18.3

Plugin Pratika 310 : 1.60.18.2

Plugin Pratika 315 : 1.60.18.2

Plugin Pratika 320 : 1.60.18.2

Plugin Pratika 325 : 1.60.18.2

Plugin Rhino RMC 3000 Absolute Mach3 Router : 1.60.18.2

Plugin Router Aspan : 1.60.18.2

Plugin Router EnRouter CNC : 1.60.18.2

Plugin Rover A 1532 : 1.60.18.2

Plugin SCM Pratika 1000 : 1.60.18.2

Plugin SCM Startech cn v : 1.60.18.2

Plugin SOPH MSZ600 : 1.60.18.2

Plugin TekMaq 3020 Mach2 Router : 1.60.18.3

Plugin Uniflex : 1.60.18.2

Plugin Venture 108 : 1.60.18.2

Plugin Venture 1M : 1.60.18.2

Plugin Venture 230M : 1.60.18.2

Plugin Venture 2M : 1.60.18.2

Plugin Venture 3M : 1.60.18.2

Plugin Venture 8M : 1.60.18.2

Enhancements

Machine Registration

1. Added Morbidelli UX100 machine plugin.

2. Added TekMaq 3020 Mach2 Router machine plugin.

3. Added Jaragua Compact EdingCNC Router machine plugin.

4. Added Nanxing NCG 3021L machine plugin.

Machine Program

1. Now, the Rover 22 machine plugin has programs generated by the service. A new program generation option has also been made available, the .PAN format. For more information, click here.

2. Now, the Venture 1M, 2M, 3M, 8M, 108M, and 230M machine plugins have their programs generated through the service.

Corrections

Machining

1. Fixed a situation where rectangular machining angles were not being generated according to the registered data. (1978532)

2. Fixed angled corners in machining that were coming out inverted in the cutting programs. (1997224)

Technical Drawing

1. Fixed a situation where the image displayed an error when generating the technical drawing. (1937930)

Plugin ERP

1. Fixed a situation where machine program generation would freeze when using the ERP plugin. (1997900)

Maestro Integration

1. Fixed the head displacement option, now it only appears for Maestro integration versions 14 or higher and Maestro version 22 or higher. (1999111)

Cyflex 900 BR Plugin

1. Fixed a situation where an inconsistency occurred when trying to generate with the Cyflex 900 BR plugin. (2005881)

Complete Label

1. Fixed a situation where a DLL was not copied and caused the error of opening the Complete Label window. (2006639)

▼ 1.60.18.1

Date: 06/07/2023

Released Plugins

Plugin ABL 210 - B : 1.60.18.1

Plugin Accord 40 FX : 1.60.18.1

Plugin Alca AL1200D : 1.60.18.1

Plugin Alca Machine Router AL2030 3S : 1.60.18.1

Plugin Alca Machine Router AL2030 ATC : 1.60.18.1

Plugin Alca Maquinas AL2030B : 1.60.18.1

Plugin Application of laminates per module report : 1.60.18.1

Plugin Ardis Cutting Optimizer : 1.60.18.1

Plugin Asia Robotica CN1325 ATC Router : 1.60.18.1

Plugin Assembly Report : 1.60.18.1

Plugin Assembly Steel Report : 1.60.18.1

Plugin Author200 : 1.60.18.1

Plugin Author327 : 1.60.18.1

Plugin Author436S : 1.60.18.1

Plugin Author500 : 1.60.18.1

Plugin AuthorM600 : 1.60.18.1

Plugin BHX050 : 1.60.18.1

Plugin BHX055 : 1.60.18.1

Plugin BHX500 : 1.60.18.1

Plugin Biesse Comil Insider FT2 : 1.60.18.1

Plugin Biesse EKO 902 : 1.60.18.1

Plugin Biesse FTT : 1.60.18.1

Plugin Biesse Rover 22 : 1.60.18.1

Plugin Biesse Rover 24 : 1.60.18.1

Plugin Biesse Rover A4 : 1.60.18.1

Plugin Biesse Rover B7 : 1.60.18.1

Plugin Biesse Skill 300 K3 : 1.60.18.1

Plugin BMG110 - Venture 113-114-115 : 1.60.18.1

Plugin Boole Opticut Optimizer : 1.60.18.1

Plugin BP 195T : 1.60.18.1

Plugin Builder : 1.60.18.1

Plugin Builder Budget : 1.60.18.1

Plugin Builder Catalog : 1.60.18.1

Plugin Builder Parts : 1.60.18.1

Plugin Builder View : 1.60.18.1

Plugin Builder Xml : 1.60.18.1

Plugin Buselatto Jet Optima A20-C20-C21 : 1.60.18.1

Plugin C-Express 920 : 1.60.18.1

Plugin CMS Maxima 24B : 1.60.18.1

Plugin Composed Panel Report : 1.60.18.1

Plugin Corte Certo : 1.60.18.1

Plugin CRS Exata Horizontal - Drilling Center : 1.60.18.1

Plugin CRS Exata Vertical 1000 - Drilling Center : 1.60.18.1

Plugin CRS Exata Vertical 1200 - Drilling Center : 1.60.18.1

Plugin Cut List : 1.60.18.1

Plugin Cut Planning : 1.60.18.1

Plugin Cut Pro : 1.60.18.1

Plugin Cut Rite : 1.60.18.1

Plugin Cyflex 900 : 1.60.18.1

Plugin Cyflex 900BR : 1.60.18.1

Plugin Cyflex H800 : 1.60.18.1

Plugin Cyflex HP - CX200 : 1.60.18.1

Plugin Cyflex S e SR : 1.60.18.1

Plugin Door Report : 1.60.18.1

Plugin Drawer Report : 1.60.18.1

Plugin DRILLTEQ V-200 : 1.60.18.1

Plugin Dynestic 7516 : 1.60.18.1

Plugin Easy Jet : 1.60.18.1

Plugin Easynest 3018 A : 1.60.18.1

Plugin Easynest 3021 : 1.60.18.1

Plugin Easynest 4021 : 1.60.18.1

Plugin Edge Band Report : 1.60.18.1

Plugin ERP Focco : 1.60.18.1

Plugin ERP Insight : 1.60.18.1

Plugin ERP Promob : 1.60.18.1

Plugin ERP Standard : 1.60.18.1

Plugin ERP WPS : 1.60.18.1

Plugin ETools Pro ATC 12 2030 Router : 1.60.18.1

Plugin Evolution 7405 : 1.60.18.1

Plugin F9L : 1.60.18.1

Plugin Felder Creator 950 : 1.60.18.1

Plugin Flexdrill 1000 : 1.60.18.1

Plugin Flexdrill 1200 : 1.60.18.1

Plugin Flexdrill 612 KS : 1.60.18.1

Plugin Flexdrill 612 M : 1.60.18.1

Plugin Flexdrill 61200 : 1.60.18.1

Plugin Format4 Profit H08 : 1.60.18.1

Plugin Format4 Profit H20-H22-H22L : 1.60.18.1

Plugin Format4 Profit H80 : 1.60.18.1

Plugin Giben Flat (BDT - Spectra) : 1.60.18.1

Plugin Giben Flat (Selexx - Professional Line - Stratos) : 1.60.18.1

Plugin Giben Flexdrill 6 1000 Evo : 1.60.18.1

Plugin Giben Genesis EVO : 1.60.18.1

Plugin GPlan : 1.60.18.1

Plugin HG 2030 Master : 1.60.18.1

Plugin Hirzt F10 : 1.60.18.1

Plugin Hirzt F6 : 1.60.18.1

Plugin Hirzt F8 : 1.60.18.1

Plugin Holzer HHOS Optimizer Cut : 1.60.18.1

Plugin Holzher Evolution 7401-7402 : 1.60.18.1

Plugin Holzher Master : 1.60.18.1

Plugin Homag Weeke ABD 100 : 1.60.18.1

Plugin Homag Weeke ABD 250 : 1.60.18.1

Plugin IF-850 Plus : 1.60.18.1

Plugin IF-8500 : 1.60.18.1

Plugin IMA BIMA : 1.60.18.1

Plugin IMA Imagic : 1.60.18.1

Plugin Industrial CNC ARTISAN 408 Router Mach 2-3 : 1.60.18.1

Plugin Integração Promob ERP Start : 1.60.18.1

Plugin Integração Promob Production : ...1

Plugin ISO Code : 1.60.18.1

Plugin Jaragua CNC Mobile Router 2818 : 1.60.18.1

Plugin Jaragua CNC Mobile TAF Router : 1.60.18.1

Plugin Jaragua CNC TAURUS 2818 : 1.60.18.1

Plugin JaraguaCNC Router Exclusive 28182 : 1.60.18.1

Plugin JaraguaCNC Solid : 1.60.18.1

Plugin JaraguaCNC Vision : 1.60.18.1

Plugin KN3710 Nesting : 1.60.18.1

Plugin Laguna SmartShop II Router - B.R : 1.60.18.1

Plugin Laguna SmartShop III Router - Fanuc : 1.60.18.1

Plugin Laguna SmartShop SUV Router - B.R : 1.60.18.1

Plugin Lepton Optimizer : 1.60.18.1

Plugin M400F : 1.60.18.1

Plugin Mach CNC MACHPRO ATC : 1.60.18.1

Plugin Mach CNC Router Elite Super Drill 2819 : 1.60.18.1

Plugin Mak Pro 3000 Mach3 Router : 1.60.18.1

Plugin Manufacturing Cabinet Report : 1.60.18.1

Plugin Manufacturing Component Report : 1.60.18.1

Plugin Marchiori LD 3000 Mach3 Router : 1.60.18.1

Plugin Master Drill TF 500 : 1.60.18.1

Plugin Masterwood Nesting MW : 1.60.18.1

Plugin MasterWood Project 415 : 1.60.18.1

Plugin MasterWood Project 465 : 1.60.18.1

Plugin Morbidelli M100 : 1.60.18.1

Plugin Nanxing NCB2412S : 1.60.18.1

Plugin OMNICNC 1325 Router : 1.60.18.1

Plugin OptiPlanning : 1.60.18.1

Plugin Ottimo-Perfect Cut : 1.60.18.1

Plugin Point 2 : 1.60.18.1

Plugin Pratika 310 : 1.60.18.1

Plugin Pratika 315 : 1.60.18.1

Plugin Pratika 320 : 1.60.18.1

Plugin Pratika 325 : 1.60.18.1

Plugin PratixS : 1.60.18.1

Plugin Profile Report : 1.60.18.1

Plugin Project 250 : 1.60.18.1

Plugin Project 450 : 1.60.18.1

Plugin Project TF : 1.60.18.1

Plugin PTP : 1.60.18.1

Plugin PTP 160 : 1.60.18.1

Plugin Puchased Item Report : 1.60.18.1

Plugin Rhino RMC 3000 Absolute Mach3 Router : 1.60.18.1

Plugin RouSer Inspire 3S Router : 1.60.18.1

Plugin Router Aspan : 1.60.18.1

Plugin Router EnRouter CNC : 1.60.18.1

Plugin Rover A 1332 : 1.60.18.1

Plugin Rover A 1532 : 1.60.18.1

Plugin Rover A 1542 : 1.60.18.1

Plugin Rover A 1625-1632-1643-1659 : 1.60.18.1

Plugin Rover A 3.30 : 1.60.18.1

Plugin Rover C9 : 1.60.18.1

Plugin Rover K FT 1531 : 1.60.18.1

Plugin Rover1836GFT : 1.60.18.1

Plugin Rover20 : 1.60.18.1

Plugin Rover2231GFT : 1.60.18.1

Plugin SARTWOOD PT6 : 1.60.18.1

Plugin SCM Pratika 1000 : 1.60.18.1

Plugin SCM Startech cn plus : 1.60.18.1

Plugin SCM Startech cn v : 1.60.18.1

Plugin ShopSabre 4896 Router : 1.60.18.1

Plugin ShopSabre IS Series : 1.60.18.1

Plugin Sideco SIR 1325 ATC Router : 1.60.18.1

Plugin Skipper 100 : 1.60.18.1

Plugin Skipper 130 : 1.60.18.1

Plugin Skipper V31 : 1.60.18.1

Plugin SOPH MSZ600 : 1.60.18.1

Plugin Spazio3D : 1.60.18.1

Plugin Speedy Factory : 1.60.18.1

Plugin Startech : 1.60.18.1

Plugin Tech 99L : 1.60.18.1

Plugin Tech Z1 : 1.60.18.1

Plugin Tech Z2 : 1.60.18.1

Plugin Tech Z25 : 1.60.18.1

Plugin Tech Z30 : 1.60.18.1

Plugin Tech Z5 : 1.60.18.1

Plugin Twister750NX : 1.60.18.1

Plugin Uniflex : 1.60.18.1

Plugin Universal NB-3618 : 1.60.18.1

Plugin Universal NB-3622 : 1.60.18.1

Plugin Universal TV 3615 : 1.60.18.1

Plugin Usaberg ATC 2819 Router : 1.60.18.1

Plugin Usikraft Evoque 2030 ATC Router : 1.60.18.1

Plugin Vantage 24-25-26 series - Nesting : 1.60.18.1

Plugin Venture 107 : 1.60.18.1

Plugin Venture 108 : 1.60.18.1

Plugin Venture 1M : 1.60.18.1

Plugin Venture 22L : 1.60.18.1

Plugin Venture 230M : 1.60.18.1

Plugin Venture 2M : 1.60.18.1

Plugin Venture 316 : 1.60.18.1

Plugin Venture 3M : 1.60.18.1

Plugin Venture 8M : 1.60.18.1

Plugin Vetor Opus : 1.60.18.1

Plugin Vetor Opus 2030 FR Code : 1.60.18.1

Plugin Vetor Opus FR 3020 SP Router : 1.60.18.1

Plugin Vitap Point K2 : 1.60.18.1

Plugin Warehouse Report : 1.60.18.1

Plugin Weeke BHC280 : 1.60.18.1

Plugin Weeke BHT500 : 1.60.18.1

Plugin Weeke Optimat BHC250 : 1.60.18.1

Plugin WIBJ5 : 1.60.18.1

Plugin WPS Optimizer : 1.60.18.1

Plugin X200 CELL - Nesting : 1.60.18.1

Enhancements

Machine Plugin

1. Added Biesse Rover A 1542 machine plugin.
2. Added Rhino RMC 3000 Absolute Mach3 Router machine plugin.

Machine programs

1. Created option in the setup so that the customer can choose the behavior of the through-machining operations. Now, it is possible to select whether the through-machining operations will behave as Contour, Pocket, or follow the machining registration. For more information, click here. (1987745)

CNC Configuration

1. Created option to edit the complete label of CNC machines. Now, it is possible to customize and modify information contained in the label according to user needs and preferences. For more information, click here.

Working area

1. A verification has been implemented in the desktop to identify if the fields Name and Identifier contain special characters.

Plugin Builder XML

1. Implemented improvement where now, when the chosen integration is Insight, the machining is generated in the sequence in which they were created.

Corrections

Machine programs

1. Fixed the situation related to the Nesting CSV, where it always pointed to the label path defined in the setup, even when the path was not being used, has been resolved. Now, the CSV will only point to the path if the customer selects the option to use it. (1998366)
2. Fixed the situation where the value of certain fields was being misread, resulting in inconsistencies when opening the machine settings screen, has been resolved. (1995418)
3. An adjustment has been made to the contour machining direction to align it with the choice made in the milling cutter. (1966236)
4. An adjustment has been made to the cutting plan to include the contour of the parts when the option Generate finished parts is selected in the setup. (1996450)
5. Fixed the situation where an inconsistency occurred while saving the temporary files required for the machine program generation process has been resolved. (1989119)
6. Fixed the situation where . inf files were generated on parts that were successfully generated. This fix was implemented in version 273 of the Machine Program Service. (1989086)
7. Fixed the situation where the customer did not have any active machines, however, the machines report was always shown as active. (1997851)

CNC Configuration

1. Fixed the situation where the Setup name contained special characters, resulting in the inconsistency of the PGMX path not found. (1983054)

ERP | Labels

1. Fixed the situation where the ERP XML, when selected ERP Start, did not contain ID_ERP information. In addition, the labels on the machines did not show this information either. (1999200)

Venture 316

1.Fixed the situation where Machining did not start from outside the part if there were internal and external lines to the part on the Venture 316 machine. (1969177)

Skipper 100 / Skipper 130

1. Fixed the situation where passing operations could not be performed by any available head (Top or Bottom) on the Skipper 100 machine. (1983875)

Builder Parts

1. Corrected the situation where occurred freezes in the 3D environment when using Builder Parts. (1988812)

CNC - Nanxing - NCB2412S / NCB612DT / NCB612T

1. Fixed the situation where an inconsistency occurred when trying to access Nanxing machine settings. (1989311)

CNC – CyflexSX

1. Fixed the situation where when importing tools the cutters were not recognized as available tools has been resolved. (1991145)

Cut optimization

1. Disabled column/decimal separators validation when the optimizer is inactive.
2. Fixed the situation where an inconsistency message occurred after finishing the cutting plan generation. (1998658)

▼ 1.60.18.0

Date: 05/16/2023

Released Plugins

Plugin ABL 210 - B : 1.60.18.0

Plugin Accord 40 FX : 1.60.18.0

Plugin Alca AL1200D : 1.60.18.0

Plugin Alca Machine Router AL2030 3S : 1.60.18.0

Plugin Alca Machine Router AL2030 ATC : 1.60.18.0

Plugin Alca Maquinas AL2030B : 1.60.18.0

Plugin Application of laminates per module report : 1.60.18.0

Plugin Ardis Cutting Optimizer : 1.60.18.0

Plugin Asia Robotica CN1325 ATC Router : 1.60.18.0

Plugin Asia Robotica CN1325-ATC Router : 1.60.18.0

Plugin Assembly Report : 1.60.18.0

Plugin Assembly Steel Report : 1.60.18.0

Plugin Author200 : 1.60.18.0

Plugin Author327 : 1.60.18.0

Plugin Author436S : 1.60.18.0

Plugin Author500 : 1.60.18.0

Plugin AuthorM600 : 1.60.18.0

Plugin BHX050 : 1.60.18.0

Plugin BHX055 : 1.60.18.0

Plugin BHX500 : 1.60.18.0

Plugin Biesse Comil Insider FT2 : 1.60.18.0

Plugin Biesse EKO 902 : 1.60.18.0

Plugin Biesse FTT : 1.60.18.0

Plugin Biesse Rover 22 : 1.60.18.0

Plugin Biesse Rover 24 : 1.60.18.0

Plugin Biesse Rover A4 : 1.60.18.0

Plugin Biesse Rover B7 : 1.60.18.0

Plugin Biesse Skill 300 K3 : 1.60.18.0

Plugin BMG110 - Venture 113-114-115 : 1.60.18.0

Plugin Boole Opticut Optimizer : 1.60.18.0

Plugin BP 195T : 1.60.18.0

Plugin Builder : 1.60.18.0

Plugin Builder Budget : 1.60.18.0

Plugin Builder Catalog : 1.60.18.0

Plugin Builder Parts : 1.60.18.0

Plugin Builder View : 1.60.18.0

Plugin Builder Xml : 1.60.18.0

Plugin Buselatto Jet Optima A20-C20-C21 : 1.60.18.0

Plugin C-Express 920 : 1.60.18.0

Plugin CMS Maxima 24B : 1.60.18.0

Plugin Composed Panel Report : 1.60.18.0

Plugin Corte Certo : 1.60.18.0

Plugin CRS Exata Horizontal - Drilling Center : 1.60.18.0

Plugin CRS Exata Vertical 1000 - Drilling Center : 1.60.18.0

Plugin CRS Exata Vertical 1200 - Drilling Center : 1.60.18.0

Plugin Cut List : 1.60.18.0

Plugin Cut Planning : 1.60.18.0

Plugin Cut Pro : 1.60.18.0

Plugin Cut Rite : 1.60.18.0

Plugin Cyflex 900 : 1.60.18.0

Plugin Cyflex 900BR : 1.60.18.0

Plugin Cyflex H800 : 1.60.18.0

Plugin Cyflex HP - CX200 : 1.60.18.0

Plugin Cyflex S e SR : 1.60.18.0

Plugin Door Report : 1.60.18.0

Plugin Drawer Report : 1.60.18.0

Plugin DRILLTEQ V-200 : 1.60.18.0

Plugin Dynestic 7516 : 1.60.18.0

Plugin Easy Jet : 1.60.18.0

Plugin Easynest 3018 A : 1.60.18.0

Plugin Easynest 3021 : 1.60.18.0

Plugin Easynest 4021 : 1.60.18.0

Plugin Edge Band Report : 1.60.18.0

Plugin ERP Focco : 1.60.18.0

Plugin ERP Insight : 1.60.18.0

Plugin ERP Promob : 1.60.18.0

Plugin ERP Standard : 1.60.18.0

Plugin ERP WPS : 1.60.18.0

Plugin ETools Pro ATC 12 2030 Router : 1.60.18.0

Plugin Evolution 7405 : 1.60.18.0

Plugin F9L : 1.60.18.0

Plugin Felder Creator 950 : 1.60.18.0

Plugin Flexdrill 1000 : 1.60.18.0

Plugin Flexdrill 1200 : 1.60.18.0

Plugin Flexdrill 612 KS : 1.60.18.0

Plugin Flexdrill 612 M : 1.60.18.0

Plugin Flexdrill 61200 : 1.60.18.0

Plugin Format4 Profit H08 : 1.60.18.0

Plugin Format4 Profit H20-H22-H22L : 1.60.18.0

Plugin Format4 Profit H80 : 1.60.18.0

Plugin Giben Flat (BDT - Spectra) : 1.60.18.0

Plugin Giben Flat (Selexx - Professional Line - Stratos) : 1.60.18.0

Plugin Giben Flexdrill 6 1000 Evo : 1.60.18.0

Plugin Giben Genesis EVO : 1.60.18.0

Plugin GPlan : 1.60.18.0

Plugin HG 2030 Master : 1.60.18.0

Plugin Hirzt F10 : 1.60.18.0

Plugin Hirzt F6 : 1.60.18.0

Plugin Hirzt F8 : 1.60.18.0

Plugin Holzer HHOS Optimizer Cut : 1.60.18.0

Plugin Holzher Evolution 7401-7402 : 1.60.18.0

Plugin Holzher Master : 1.60.18.0

Plugin Homag Weeke ABD 100 : 1.60.18.0

Plugin Homag Weeke ABD 250 : 1.60.18.0

Plugin IF-850 Plus : 1.60.18.0

Plugin IF-8500 : 1.60.18.0

Plugin IMA BIMA : 1.60.18.0

Plugin IMA Imagic : 1.60.18.0

Plugin Industrial CNC ARTISAN 408 Router Mach 2-3 : 1.60.18.0

Plugin Integração Promob ERP Start : 1.60.18.0

Plugin Integração Promob Production : 1.60.18.0

Plugin ISO Code : 1.60.18.0

Plugin Jaragua CNC Mobile Router 2818 : 1.60.18.0

Plugin Jaragua CNC Mobile TAF Router : 1.60.18.0

Plugin Jaragua CNC TAURUS 2818 : 1.60.18.0

Plugin JaraguaCNC Router Exclusive 28182 : 1.60.18.0

Plugin JaraguaCNC Solid : 1.60.18.0

Plugin JaraguaCNC Vision : 1.60.18.0

Plugin KN3710 Nesting : 1.60.18.0

Plugin Laguna SmartShop II Router - B.R : 1.60.18.0

Plugin Laguna SmartShop III Router - Fanuc : 1.60.18.0

Plugin Laguna SmartShop SUV Router - B.R : 1.60.18.0

Plugin Lepton Optimizer : 1.60.18.0

Plugin M400F : 1.60.18.0

Plugin Mach CNC MACHPRO ATC : 1.60.18.0

Plugin Mach CNC Router Elite Super Drill 2819 : 1.60.18.0

Plugin Mak Pro 3000 Mach3 Router : 1.60.18.0

Plugin Manufacturing Cabinet Report : 1.60.18.0

Plugin Manufacturing Component Report : 1.60.18.0

Plugin Marchiori LD 3000 Mach3 Router : 1.60.18.0

Plugin Master Drill TF 500 : 1.60.18.0

Plugin Masterwood Nesting MW : 1.60.18.0

Plugin MasterWood Project 415 : 1.60.18.0

Plugin MasterWood Project 465 : 1.60.18.0

Plugin Morbidelli M100 : 1.60.18.0

Plugin Nanxing NCB2412S : 1.60.18.0

Plugin OMNICNC 1325 Router : 1.60.18.0

Plugin OptiPlanning : 1.60.18.0

Plugin Ottimo-Perfect Cut : 1.60.18.0

Plugin Point 2 : 1.60.18.0

Plugin Pratika 310 : 1.60.18.0

Plugin Pratika 315 : 1.60.18.0

Plugin Pratika 320 : 1.60.18.0

Plugin Pratika 325 : 1.60.18.0

Plugin PratixS : 1.60.18.0

Plugin Profile Report : 1.60.18.0

Plugin Project 250 : 1.60.18.0

Plugin Project 450 : 1.60.18.0

Plugin Project TF : 1.60.18.0

Plugin PTP : 1.60.18.0

Plugin PTP 160 : 1.60.18.0

Plugin Puchased Item Report : 1.60.18.0

Plugin RouSer Inspire 3S Router : 1.60.18.0

Plugin Router Aspan : 1.60.18.0

Plugin Router EnRouter CNC : 1.60.18.0

Plugin Rover A 1332 : 1.60.18.0

Plugin Rover A 1532 : 1.60.18.0

Plugin Rover A 1625-1632-1643-1659 : 1.60.18.0

Plugin Rover A 3.30 : 1.60.18.0

Plugin Rover C9 : 1.60.18.0

Plugin Rover K FT 1531 : 1.60.18.0

Plugin Rover1836GFT : 1.60.18.0

Plugin Rover20 : 1.60.18.0

Plugin Rover2231GFT : 1.60.18.0

Plugin SARTWOOD PT6 : 1.60.18.0

Plugin SCM Pratika 1000 : 1.60.18.0

Plugin SCM Startech cn plus : 1.60.18.0

Plugin SCM Startech cn v : 1.60.18.0

Plugin ShopSabre 4896 Router : 1.60.18.0

Plugin ShopSabre IS Series : 1.60.18.0

Plugin Sideco SIR 1325 ATC Router : 1.60.18.0

Plugin Skipper 100 : 1.60.18.0

Plugin Skipper 130 : 1.60.18.0

Plugin Skipper V31 : 1.60.18.0

Plugin SOPH MSZ600 : 1.60.18.0

Plugin Spazio3D : 1.60.18.0

Plugin Speedy Factory : 1.60.18.0

Plugin Startech : 1.60.18.0

Plugin Tech 99L : 1.60.18.0

Plugin Tech Z1 : 1.60.18.0

Plugin Tech Z2 : 1.60.18.0

Plugin Tech Z25 : 1.60.18.0

Plugin Tech Z30 : 1.60.18.0

Plugin Tech Z5 : 1.60.18.0

Plugin Twister750NX : 1.60.18.0

Plugin Uniflex : 1.60.18.0

Plugin Universal NB-3618 : 1.60.18.0

Plugin Universal NB-3622 : 1.60.18.0

Plugin Universal TV 3615 : 1.60.18.0

Plugin Usaberg ATC 2819 Router : 1.60.18.0

Plugin Usikraft Evoque 2030 ATC Router : 1.60.18.0

Plugin Vantage 24-25-26 series - Nesting : 1.60.18.0

Plugin Venture 107 : 1.60.18.0

Plugin Venture 108 : 1.60.18.0

Plugin Venture 1M : 1.60.18.0

Plugin Venture 22L : 1.60.18.0

Plugin Venture 230M : 1.60.18.0

Plugin Venture 2M : 1.60.18.0

Plugin Venture 316 : 1.60.18.0

Plugin Venture 3M : 1.60.18.0

Plugin Venture 8M : 1.60.18.0

Plugin Vetor Opus : 1.60.18.0

Plugin Vetor Opus 2030 FR Code : 1.60.18.0

Plugin Vetor Opus FR 3020 SP Router : 1.60.18.0

Plugin Vitap Point K2 : 1.60.18.0

Plugin Warehouse Report : 1.60.18.0

Plugin Weeke BHC280 : 1.60.18.0

Plugin Weeke BHT500 : 1.60.18.0

Plugin Weeke Optimat BHC250 : 1.60.18.0

Plugin WIBJ5 : 1.60.18.0

Plugin WPS Optimizer : 1.60.18.0

Plugin X200 CELL - Nesting : 1.60.18.0

Enhancements

Worker
1. Added compatibility with Worker version 6.60.18.0.

Machine Plugin

1. Added Starwood PT6 machine plugin, which performs the generation of machines program via cloud service. For more information about the machine click here.

2. Added Mak Pro 3000 Mach3 Router machine plugin.

Operations Register

1. It is now possible to relate operations, allowing the order of operations generated in the machine program to be modified. For more information click here. (1964363)

Corrections

Machine Programs
1. Fixed situation where label path was incorrect when generating csv. files in machine program. (1973942)

2. Fixed the situation where non-compliance was displayed when generating the machine program in projects with loose hardware in the 3D environment. (1977862)

3. Fixed the situation where the machine program was not correctly associated with XML, undue duplication of these programs occurring. (1973376)

Plugin Uniflex

1. Fixed the situation where when sending parts with two sided operations, the operations were mirrored. (1964141)

Insight ERP Integration

1. Fixed situation where the integration file displayed PDF and XML file paths different from where they were saved and the extension of image files were displayed as .pdf instead of .bmp. (1974056)

Cut optimization and ERP integration

1. Fixed the situation where parts not associated with Machine Plugins were incorrectly validated in Cut Optimization and ERP Integration. (1971427)

Operations Register

1. Fixed the situation where when loading extra operations into the XML file of integrations, an inconsistency occurred. (1977107)

Plugin Insider FT2
1. Corrected the situation where the positioning of the drill holes were incorrect. (1966610)

Plugin Giben Flexdrill 1200
1. Corrected the situation where the positioning of the drill holes were incorrect. (1974483)

Worker
1. Fixed a situation where the DocumentDatabase service prompted for a password on installation.

Plugin Cut Pro

1. Fixed the situation where when generating Cut Pro, the value of the column/height of the edge tape, had the value zeroed. (1962918)

Builder Parts

1. Fixed the situation where machining could not be correctly visualized on the top face of the part. (1956346)

▼ 1.60.17.7

Date: 04/05/2023

Released Plugins

Plugin ABL 210 - B : 1.60.17.6

Plugin Accord 40 FX : 1.60.17.7

Plugin Alca AL1200D : 1.60.17.7

Plugin Alca Machine Router AL2030 3S : 1.60.17.7

Plugin Alca Machine Router AL2030 ATC : 1.60.17.7

Plugin Alca Maquinas AL2030B : 1.60.17.7

Plugin Application of laminates per module report : 1.60.17.5

Plugin Ardis Cutting Optimizer : 1.60.17.6

Plugin Asia Robotica CN1325 ATC Router : 1.60.16.17

Plugin Assembly Report : 1.60.17.5

Plugin Assembly Steel Report : 1.60.17.5

Plugin Author200 : 1.60.17.6

Plugin Author327 : 1.60.17.6

Plugin Author436S : 1.60.17.6

Plugin Author500 : 1.60.17.6

Plugin AuthorM600 : 1.60.17.6

Plugin BHX050 : 1.60.17.5

Plugin BHX055 : 1.60.17.7

Plugin BHX500 : 1.60.17.6

Plugin Biesse Comil Insider FT2 : 1.60.17.6

Plugin Biesse EKO 902 : 1.60.17.5

Plugin Biesse FTT : 1.60.17.5

Plugin Biesse Rover 22 : 1.60.17.5

Plugin Biesse Rover 24 : 1.60.17.5

Plugin Biesse Rover A4 : 1.60.17.5

Plugin Biesse Rover B7 : 1.60.17.5

Plugin Biesse Skill 300 K3 : 1.60.17.5

Plugin BMG110 - Venture 113-114-115 : 1.60.17.5

Plugin Boole Opticut Optimizer : 1.60.17.6

Plugin BP 195T : 1.60.17.6

Plugin Builder : 1.60.17.7

Plugin Builder Budget : 1.60.17.6

Plugin Builder Catalog : 1.60.17.6

Plugin Builder Parts : 1.60.17.7

Plugin Builder View : 1.60.17.5

Plugin Builder Xml : 1.60.17.6

Plugin Buselatto Jet Optima A20-C20-C21 : 1.60.17.5

Plugin C-Express 920 : 1.60.17.5

Plugin CMS Maxima 24B : 1.60.17.7

Plugin Composed Panel Report : 1.60.17.5

Plugin Corte Certo : 1.60.17.6

Plugin CRS Exata Horizontal - Drilling Center : 1.60.17.5

Plugin CRS Exata Vertical 1000 - Drilling Center : 1.60.17.5

Plugin CRS Exata Vertical 1200 - Drilling Center : 1.60.17.5

Plugin Cut List : 1.60.17.6

Plugin Cut Planning : 1.60.17.6

Plugin Cut Pro : 1.60.17.7

Plugin Cut Rite : 1.60.17.6

Plugin Cyflex 900 : 1.60.17.6

Plugin Cyflex 900BR : 1.60.17.6

Plugin Cyflex H800 : 1.60.17.5

Plugin Cyflex HP - CX200 : 1.60.17.6

Plugin Cyflex S e SR : 1.60.17.7

Plugin Door Report : 1.60.17.5

Plugin Drawer Report : 1.60.17.5

Plugin DRILLTEQ V-200 : 1.60.17.6

Plugin Dynestic 7516 : 1.60.17.5

Plugin Easy Jet : 1.60.17.6

Plugin Easynest 3018 A : 1.60.17.5

Plugin Easynest 3021 : 1.60.17.5

Plugin Easynest 4021 : 1.60.17.5

Plugin Edge Band Report : 1.60.17.5

Plugin ERP Focco : 1.60.17.5

Plugin ERP Insight : 1.60.17.5

Plugin ERP Promob : 1.60.17.5

Plugin ERP Standard : 1.60.17.5

Plugin ERP WPS : 1.60.17.5

Plugin ETools Pro ATC 12 2030 Router : 1.60.17.7

Plugin Evolution 7405 : 1.60.17.7

Plugin F9L : 1.60.17.5

Plugin Felder Creator 950 : 1.60.17.6

Plugin Flexdrill 1000 : 1.60.17.6

Plugin Flexdrill 1200 : 1.60.17.6

Plugin Flexdrill 612 KS : 1.60.17.5

Plugin Flexdrill 612 M : 1.60.17.5

Plugin Flexdrill 61200 : 1.60.17.7

Plugin Format4 Profit H08 : 1.60.17.5

Plugin Format4 Profit H20-H22-H22L : 1.60.17.5

Plugin Format4 Profit H80 : 1.60.17.5

Plugin Giben Flat (BDT - Spectra) : 1.60.17.5

Plugin Giben Flat (Selexx - Professional Line - Stratos) : 1.60.17.5

Plugin Giben Flexdrill 6 1000 Evo : 1.60.17.6

Plugin Giben Genesis EVO : 1.60.17.5

Plugin GPlan : 1.60.17.6

Plugin HG 2030 Master : 1.60.17.7

Plugin Hirzt F10 : 1.60.17.5

Plugin Hirzt F6 : 1.60.17.5

Plugin Hirzt F8 : 1.60.17.5

Plugin Holzer HHOS Optimizer Cut : 1.60.17.6

Plugin Holzher Evolution 7401-7402 : 1.60.17.7

Plugin Holzher Master : 1.60.17.5

Plugin Homag Weeke ABD 100 : 1.60.17.6

Plugin Homag Weeke ABD 250 : 1.60.17.6

Plugin IF-850 Plus : 1.60.17.5

Plugin IF-8500 : 1.60.17.5

Plugin IMA BIMA : 1.60.17.7

Plugin IMA Imagic : 1.60.17.6

Plugin Industrial CNC ARTISAN 408 Router Mach 2-3 : 1.60.17.7

Plugin Integração Promob ERP Start : 1.60.17.5

Plugin Integração Promob Production : 1.11.7.2

Plugin ISO Code : 1.60.17.7

Plugin Jaragua CNC Mobile Router 2818 : 1.60.17.7

Plugin Jaragua CNC Mobile TAF Router : 1.60.17.7

Plugin Jaragua CNC TAURUS 2818 : 1.60.17.7

Plugin JaraguaCNC Router Exclusive 28182 : 1.60.17.7

Plugin JaraguaCNC Solid : 1.60.17.7

Plugin JaraguaCNC Vision : 1.60.17.7

Plugin KN3710 Nesting : 1.60.17.5

Plugin Laguna SmartShop II Router - B.R : 1.60.17.7

Plugin Laguna SmartShop III Router - Fanuc : 1.60.17.7

Plugin Laguna SmartShop SUV Router - B.R : 1.60.17.6

Plugin Lepton Optimizer : 1.60.17.6

Plugin M400F : 1.60.17.7

Plugin Mach CNC MACHPRO ATC : 1.60.17.7

Plugin Mach CNC Router Elite Super Drill 2819 : 1.60.17.7

Plugin Manufacturing Cabinet Report : 1.60.17.5

Plugin Manufacturing Component Report : 1.60.17.5

Plugin Marchiori LD 3000 Mach3 Router : 1.60.17.8

Plugin Master Drill TF 500 : 1.60.17.5

Plugin Masterwood Nesting MW : 1.60.17.5

Plugin MasterWood Project 415 : 1.60.17.5

Plugin MasterWood Project 465 : 1.60.17.5

Plugin Morbidelli M100 : 1.60.17.7

Plugin Nanxing NCB2412S : 1.60.17.6

Plugin OMNICNC 1325 Router : 1.60.17.7

Plugin OptiPlanning : 1.60.17.6

Plugin Ottimo-Perfect Cut : 1.60.17.6

Plugin Point 2 : 1.60.17.5

Plugin Pratika 310 : 1.60.17.6

Plugin Pratika 315 : 1.60.17.6

Plugin Pratika 320 : 1.60.17.7

Plugin Pratika 325 : 1.60.17.7

Plugin PratixS : 1.60.17.7

Plugin Profile Report : 1.60.17.5

Plugin Project 250 : 1.60.17.5

Plugin Project 450 : 1.60.17.5

Plugin Project TF : 1.60.17.5

Plugin PTP : 1.60.17.5

Plugin PTP 160 : 1.60.17.5

Plugin Puchased Item Report : 1.60.17.5

Plugin RouSer Inspire 3S Router : 1.60.17.7

Plugin Router Aspan : 1.60.17.7

Plugin Router EnRouter CNC : 1.60.17.7

Plugin Rover A 1332 : 1.60.17.5

Plugin Rover A 1532 : 1.60.17.7

Plugin Rover A 1625-1632-1643-1659 : 1.60.17.6

Plugin Rover A 3.30 : 1.60.17.5

Plugin Rover C9 : 1.60.17.5

Plugin Rover K FT 1531 : 1.60.17.6

Plugin Rover1836GFT : 1.60.17.5

Plugin Rover20 : 1.60.17.5

Plugin Rover2231GFT : 1.60.17.5

Plugin SCM Pratika 1000 : 1.60.17.7

Plugin SCM Startech cn plus : 1.60.17.6

Plugin SCM Startech cn v : 1.60.17.6

Plugin ShopSabre IS Series : 1.60.17.7

Plugin Skipper 100 : 1.60.17.6

Plugin Skipper 130 : 1.60.17.6

Plugin Skipper V31 : 1.60.17.5

Plugin SOPH MSZ600 : 1.60.17.5

Plugin Spazio3D : 1.60.17.5

Plugin Speedy Factory : 1.60.17.5

Plugin Startech : 1.60.17.5

Plugin Tech 99L : 1.60.17.5

Plugin Tech Z1 : 1.60.17.6

Plugin Tech Z2 : 1.60.17.6

Plugin Tech Z25 : 1.60.17.6

Plugin Tech Z30 : 1.60.17.6

Plugin Tech Z5 : 1.60.17.6

Plugin Twister750NX : 1.60.17.5

Plugin Uniflex : 1.60.17.6

Plugin Universal NB-3618 : 1.60.17.7

Plugin Universal NB-3622 : 1.60.17.7

Plugin Universal TV 3615 : 1.60.17.6

Plugin Usaberg ATC 2819 Router : 1.60.17.7

Plugin Usikraft Evoque 2030 ATC Router : 1.60.17.7

Plugin Vantage 24-25-26 series - Nesting : 1.60.17.5

Plugin Venture 107 : 1.60.17.5

Plugin Venture 108 : 1.60.17.5

Plugin Venture 1M : 1.60.17.5

Plugin Venture 22L : 1.60.17.5

Plugin Venture 230M : 1.60.17.5

Plugin Venture 2M : 1.60.17.5

Plugin Venture 316 : 1.60.17.5

Plugin Venture 3M : 1.60.17.5

Plugin Venture 8M : 1.60.17.5

Plugin Vetor Opus : 1.60.17.5

Plugin Vetor Opus 2030 FR Code : 1.60.17.6

Plugin Vetor Opus FR 3020 SP Router : 1.60.17.6

Plugin Vitap Point K2 : 1.60.17.5

Plugin Warehouse Report : 1.60.17.5

Plugin Weeke BHC280 : 1.60.17.5

Plugin Weeke BHT500 : 1.60.17.7

Plugin Weeke Optimat BHC250 : 1.60.17.5

Plugin WIBJ5 : 1.60.17.5

Plugin WPS Optimizer : 1.60.17.6

Plugin X200 CELL - Nesting : 1.60.17.7

Enhancements

Builder Parts
1. Added option that allows Save Parts Online. For more information click here. (1878706 e 1755755)

Builder
1. It is possible to duplicate operations in the Builder Tab. For more information click here. (1873790)

Machine Programs

1. Added Profile Operations commands from the IMA BIMA plugin. (1900090)

2. Added processes for Stop Command to the plugin operations of the BHX055 machine. For more information click here.

Machine Plugin

1. Added Marchiori LD 3000 Mach3 Router machine plugin.

2. Added Alca AL1200D machine plugin. For more information about the machine click here.

Corrections

Machine Programs
1. Fixed situation where an inconsistency was displayed in the program generated by the Insider FT2 machine.

2. Corrected the rotation of the veins for DXF machines. (1961577)

3. Corrected the slot restriction at the bottom of the Cyflex S and Sr plugin part. (1947015)

4. Adjusted the machining of the cutter of the Genesis EVO Machine plugin, when it is in the anti-clockwise sense. (1957384)

5. Adjusted the internal through machining in the ABL 210B Machine plugin, so that the material is completely removed from the machining. (1962893)

6. Adjusted the alignment of slots made by saw in the Inmes IF-8500 plugin. (1972535)

CNC Configuration

1. Adjusted the File menu in the CNC settings, so that the .pgmx file extension is saved correctly in CSV. (1974807)

2. Fixed the situation where when selecting the option Enabled with the machining tool, in the Machining Processes menu of the machines that generate files . pgm, the operation of the process was incorrect. (1943873)

Plugin Pratika 325

1. Fixed the situation in the Pratika 325 machine plugin, where when copying image from Tags to the selected path, an inconsistency was displayed. (1958159)
2. Fixed the situation in the Pratika 325 plugin nesting where the nonconformity Could not locate a part of the path was generated. (1960332)

3. Adjusted in the Pratika 325 plugin, the path to move .pgmx files to the destination folder. (1970569)

Plugin Giben Flexdrill 6 1000 Evo

1. Fixed the situation in the Giben Flexdrill 6 1000 Evo plugin, where when generating a rectangular loose machining by the inside of the part, an inconformity was generated. (1964701)

Cut optimization

1. Adjusted procedure when generating Edge Tape XML in cutRite. (1972459)

SCA Library / Budget

1. Adjusted the budget file procedure, now allowing the correct display of data and generation of the order package. (1957367)

Inmes IF-8500

1. Adjusted procedure of the files with the extension .pza, allowing to correctly generate the program of machines. (1977486)

Ottimo Perfect Cut

1. Provided in the Settings screen the possibility to inform the column separator, if not informed the pattern will be represented as comma (,). (1978241)

▼ 1.60.17.6

Date: 03/01/2023

Released Plugins

Plugin Accord 40 FX : 1.60.17.6

Plugin Alca Machine Router AL2030 3S : 1.60.17.6

Plugin Alca Machine Router AL2030 ATC : 1.60.17.6

Plugin Alca Maquinas AL2030B : 1.60.17.6

Plugin Ardis Cutting Optimizer : 1.60.17.5

Plugin Asia Robotica CN1325 ATC Router : 1.60.17.6

Plugin BHX055 : 1.60.17.6

Plugin Boole Opticut Optimizer : 1.60.17.5

Plugin Builder : 1.60.17.6

Plugin Builder Budget : 1.60.17.5

Plugin Builder Catalog : 1.60.17.5

Plugin Builder Parts : 1.60.17.6

Plugin Builder Xml : 1.60.17.5

Plugin CMS Maxima 24B : 1.60.17.6

Plugin Corte Certo : 1.60.17.5

Plugin Cut List : 1.60.17.5

Plugin Cut Planning : 1.60.17.5

Plugin Cut Pro : 1.60.17.6

Plugin Cut Rite : 1.60.17.5

Plugin Cyflex S e SR : 1.60.17.6

Plugin ETools Pro ATC 12 2030 Router : 1.60.17.6

Plugin Evolution 7405 : 1.60.17.6

Plugin Felder Creator 950 : 1.60.17.5

Plugin Flexdrill 1000 : 1.60.17.5

Plugin Flexdrill 1200 : 1.60.17.5

Plugin Flexdrill 61200 : 1.60.17.6

Plugin Giben Flexdrill 6 1000 Evo : 1.60.17.5

Plugin GPlan : 1.60.17.5

Plugin HG 2030 Master : 1.60.17.6

Plugin Holzer HHOS Optimizer Cut : 1.60.17.5

Plugin Holzher Evolution 7401-7402 : 1.60.17.6

Plugin IMA BIMA : 1.60.17.6

Plugin Industrial CNC ARTISAN 408 Router Mach 2-3 : 1.60.17.6

Plugin ISO Code : 1.60.17.6

Plugin Jaragua CNC Mobile Router 2818 : 1.60.17.6

Plugin Jaragua CNC Mobile TAF Router : 1.60.17.6

Plugin Jaragua CNC TAURUS 2818 : 1.60.17.6

Plugin JaraguaCNC Router Exclusive 28182 : 1.60.17.6

Plugin JaraguaCNC Solid : 1.60.17.6

Plugin JaraguaCNC Vision : 1.60.17.6

Plugin Laguna SmartShop II Router - B.R : 1.60.17.6

Plugin Laguna SmartShop III Router - Fanuc : 1.60.17.6

Plugin Lepton Optimizer : 1.60.17.5

Plugin M400F : 1.60.17.6

Plugin Mach CNC MACHPRO ATC : 1.60.17.6

Plugin Mach CNC Router Elite Super Drill 2819 : 1.60.17.6

Plugin Morbidelli M100 : 1.60.17.6

Plugin OMNICNC 1325 Router : 1.60.17.6

Plugin OptiPlanning : 1.60.17.5

Plugin Ottimo-Perfect Cut : 1.60.17.5

Plugin Pratika 320 : 1.60.17.6

Plugin Pratika 325 : 1.60.17.6

Plugin PratixS : 1.60.17.6

Plugin RouSer Inspire 3S Router : 1.60.17.6

Plugin Router Aspan : 1.60.17.6

Plugin Router EnRouter CNC : 1.60.17.6

Plugin Rover A 1532 : 1.60.17.6

Plugin SCM Pratika 1000 : 1.60.17.6

Plugin ShopSabre IS Series : 1.60.17.6

Plugin Skipper 100 : 1.60.17.5

Plugin Skipper 130 : 1.60.17.5

Plugin Universal NB-3618 : 1.60.17.6

Plugin Universal NB-3622 : 1.60.17.6

Plugin Usaberg ATC 2819 Router : 1.60.17.6

Plugin Usikraft Evoque 2030 ATC Router : 1.60.17.6

Plugin WPS Optimizer : 1.60.17.5

Plugin X200 CELL - Nesting : 1.60.17.6

Enhancemets

Machine Program
1. Created option not to convert by XConverter just once, for parts smaller than width X. (1900594)

2. Added in Giben machines the option to change the order in which the operations come out in the Machine Program. (1929956)

3. Added in the Builder XML plugin the option to change the order in which the operations come out in the Machine Program. (1936351)

Wildcard

1. It is now possible to add materials for use by wildcard, directly on Builder Production Materials Register. (1917439)

Plugin Cyflex S & SR

1. Added field to configure Security Quota for operations. (1952232)

CNC Settings

1. Adjusted the Nesting csv file so that it does not show parts with an area smaller than the one marked in the CNC settings. (1933217)

Cut Optimizers

1. Added option to set column separator in Crop Optimizer Settings screen.

2. Added option to set decimal separator in Crop Optimizer Settings screen.

3. Added validation to prevent column and decimal separators from being the same, in Trimming Optimizers Settings.
4. Included default value; - semicolon, for column separator in Clipping Optimizers using csv.

Corrections

Machine Programs
1. Fixed situation in which, when importing Maestro Plugin tools via Builder, the option to select the tool file path was not displayed.
2. Fixed situation in which the internal machining was generated as if it were a line machining. (1949658)
3. Corrected the Plugin Creator 950 machine program so that it generates the alignment of the part as marked in the settings. (1924607)
4. Fixed tool selection for tearing on FlexDrill 61000 and 61200 machines. (1947481)

Technical Drawing
1. Corrected type of contour/internal machining when machining is through. (1939515)
2. Fixed situation in which the rectangular machining was not appearing in the technical drawing. (1902160)

ERP Integration
1. Fixed the full path of the drawing file, for integration with Focco ERP. (1942776)
2. Fixed situation when activating Mach Pro Plugin when ERP Promob Plugin is active. (1946855)
3. Fixed Promob ERP Plugin to generate drawings of aluminum doors in the same way as the Technical Drawing plugin. (1942570)

Plugin Maestro
1. Fixed situations when generating Nesting files and converting .pgmx program files on machines that have integration with the Maestro Plugin. (1945032 1954315, 1952813, 1952232)

Worker Integration
1. Fixed Project ID that was incorrect in Worker integration. (1941762)

Aspan Plugin
1. Fixed a situation in which rips were being sent as rectangles instead of lines. (1941132)

Plugin Accord 40 FX
1. Fixed nonconformity when generating files in Plugin Accord 40 FX. (1954230)

Cut Plans
1. Reverted validation of items that are sent to the Cut Plan. Now, the validation will only happen in Plugin Cut Pro, where module-type entities containing the COMPONENT = true attribute will not be sent. (1961419)
2. Fixed situation in which a nonconformity was generated when sending tamburatos to the Cutting Plan. (1938237)

Skipper 100 and Skipper 130
1. Fixed Symmetry field on Skipper 100 and Skipper 130 machines to be visible in each machine setup. (1938480)

CMS MAXIMUM 24 MB
1. Fixed the situation in which a nonconformity occurred when generating CMS MAXIMA 24 MB machine programs, when the project did not have glass items. (1957973)

CNC Settings
1. Fixed a situation where, when importing tools from the Maestro Plugin, the milling cutters were not imported correctly. (1951217)

BIMA Plugin

1. Fixed translation in CNC BIMA plugin settings.

DocumentService
1. Fixed a situation in which, when restoring a Database of the DocumentService Service of an old application, there was a message that the database was not big enough to store new data. (1945754)

Budget
1. Fixed situation in which a nonconformity was generated when generating an exploded budget.

Nesting File

1. Adjusted the Nesting file of the ISO Machine plugin so that it makes the second pass in pieces smaller than the one informed in the CNC settings. (1939622)

Cut Optimizers

1. Fixed export of Builder project to csv, saving the customer's name in all lines. (1951159)

▼ 1.60.17.5

Date: 01/11/2023

Released Plugins

Plugin ABL 210 - B : 1.60.17.5

Plugin Accord 40 FX : 1.60.17.5

Plugin Alca Machine Router AL2030 3S : 1.60.17.5

Plugin Alca Machine Router AL2030 ATC : 1.60.17.5

Plugin Alca Maquinas AL2030B : 1.60.17.5

Plugin Application of laminates per module report : 1.60.17.4

Plugin Ardis Cutting Optimizer : 1.60.17.4

Plugin Asia Robotica CN1325 ATC Router : 1.60.17.5

Plugin Assembly Report : 1.60.17.4

Plugin Assembly Steel Report : 1.60.17.4

Plugin Author200 : 1.60.17.5

Plugin Author327 : 1.60.17.5

Plugin Author436S : 1.60.17.5

Plugin Author500 : 1.60.17.5

Plugin AuthorM600 : 1.60.17.5

Plugin BHX050 : 1.60.17.4

Plugin BHX055 : 1.60.17.5

Plugin BHX500 : 1.60.17.5

Plugin Biesse Comil Insider FT2 : 1.60.17.5

Plugin Biesse EKO 902 : 1.60.17.4

Plugin Biesse FTT : 1.60.17.5

Plugin Biesse Rover 22 : 1.60.17.4

Plugin Biesse Rover 24 : 1.60.17.4

Plugin Biesse Rover A4 : 1.60.17.4

Plugin Biesse Rover B7 : 1.60.17.4

Plugin Biesse Skill 300 K3 : 1.60.17.4

Plugin BMG110 - Venture 113-114-115 : 1.60.17.4

Plugin Boole Opticut Optimizer : 1.60.17.4

Plugin BP 195T : 1.60.17.5

Plugin Builder : 1.60.17.5

Plugin Builder Budget : 1.60.17.4

Plugin Builder Catalog : 1.60.17.4

Plugin Builder Parts : 1.60.17.5

Plugin Builder View : 1.60.17.4

Plugin Builder Xml : 1.60.17.4

Plugin Buselatto Jet Optima A20-C20-C21 : 1.60.17.4

Plugin C-Express 920 : 1.60.17.4

Plugin CMS Maxima 24B : 1.60.17.5

Plugin Composed Panel Report : 1.60.17.4

Plugin Corte Certo : 1.60.17.4

Plugin CRS Exata Horizontal - Drilling Center : 1.60.17.4

Plugin CRS Exata Vertical 1000 - Drilling Center : 1.60.17.4

Plugin CRS Exata Vertical 1200 - Drilling Center : 1.60.17.4

Plugin Cut List : 1.60.17.4

Plugin Cut Planning : 1.60.17.4

Plugin Cut Pro : 1.60.17.5

Plugin Cut Rite : 1.60.17.4

Plugin Cyflex 900 : 1.60.17.5

Plugin Cyflex 900BR : 1.60.17.5

Plugin Cyflex H800 : 1.60.17.4

Plugin Cyflex HP - CX200 : 1.60.17.5

Plugin Cyflex S e SR : 1.60.17.5

Plugin Door Report : 1.60.17.4

Plugin Drawer Report : 1.60.17.4

Plugin DRILLTEQ V-200 : 1.60.17.5

Plugin Dynestic 7516 : 1.60.17.4

Plugin Easy Jet : 1.60.17.5

Plugin Easynest 3018 A : 1.60.17.4

Plugin Easynest 3021 : 1.60.17.4

Plugin Easynest 4021 : 1.60.17.4

Plugin Edge Band Report : 1.60.17.4

Plugin ERP Focco : 1.60.17.4

Plugin ERP Insight : 1.60.17.4

Plugin ERP Promob : 1.60.17.4

Plugin ERP Standard : 1.60.17.4

Plugin ERP WPS : 1.60.17.4

Plugin ETools Pro ATC 12 2030 Router : 1.60.17.5

Plugin Evolution 7405 : 1.60.17.5

Plugin F9L : 1.60.17.4

Plugin Felder Creator 950 : 1.60.17.4

Plugin Flexdrill 1000 : 1.60.17.4

Plugin Flexdrill 1200 : 1.60.17.4

Plugin Flexdrill 612 KS : 1.60.17.4

Plugin Flexdrill 612 M : 1.60.17.4

Plugin Flexdrill 61200 : 1.60.17.5

Plugin Format4 Profit H08 : 1.60.17.4

Plugin Format4 Profit H20-H22-H22L : 1.60.17.4

Plugin Format4 Profit H80 : 1.60.17.4

Plugin Giben Flat (BDT - Spectra) : 1.60.17.4

Plugin Giben Flat (Selexx - Professional Line - Stratos) : 1.60.17.4

Plugin Giben Flexdrill 6 1000 Evo : 1.60.17.4

Plugin Giben Genesis EVO : 1.60.17.4

Plugin GPlan : 1.60.17.4

Plugin HG 2030 Master : 1.60.17.5

Plugin Hirzt F10 : 1.60.17.5

Plugin Hirzt F6 : 1.60.17.4

Plugin Hirzt F8 : 1.60.17.4

Plugin Holzer HHOS Optimizer Cut : 1.60.17.4

Plugin Holzher Evolution 7401-7402 : 1.60.17.5

Plugin Holzher Master : 1.60.17.4

Plugin Homag Weeke ABD 100 : 1.60.17.5

Plugin Homag Weeke ABD 250 : 1.60.17.5

Plugin IF-850 Plus : 1.60.17.4

Plugin IF-8500 : 1.60.17.4

Plugin IMA BIMA : 1.60.17.5

Plugin IMA Imagic : 1.60.17.5

Plugin Industrial CNC ARTISAN 408 Router Mach 2-3 : 1.60.17.5

Plugin Integração Promob ERP Start : 1.60.17.4

Plugin Integração Promob Production : 1.60.17.5

Plugin ISO Code : 1.60.17.5

Plugin Jaragua CNC Mobile Router 2818 : 1.60.17.5

Plugin Jaragua CNC Mobile TAF Router : 1.60.17.5

Plugin Jaragua CNC TAURUS 2818 : 1.60.17.5

Plugin JaraguaCNC Router Exclusive 28182 : 1.60.17.5

Plugin JaraguaCNC Solid : 1.60.17.5

Plugin JaraguaCNC Vision : 1.60.17.5

Plugin KN3710 Nesting : 1.60.17.4

Plugin Laguna SmartShop II Router - B.R : 1.60.17.5

Plugin Laguna SmartShop III Router - Fanuc : 1.60.17.5

Plugin Laguna SmartShop SUV Router - B.R : 1.60.17.5

Plugin Lepton Optimizer : 1.60.17.4

Plugin M400F : 1.60.17.5

Plugin Mach CNC MACHPRO ATC : 1.60.17.5

Plugin Mach CNC Router Elite Super Drill 2819 : 1.60.17.5

Plugin Manufacturing Cabinet Report : 1.60.17.4

Plugin Manufacturing Component Report : 1.60.17.4

Plugin Master Drill TF 500 : 1.60.17.4

Plugin Masterwood Nesting MW : 1.60.17.4

Plugin MasterWood Project 415 : 1.60.17.4

Plugin MasterWood Project 465 : 1.60.17.4

Plugin Morbidelli M100 : 1.60.17.5

Plugin Nanxing NCB2412S : 1.60.17.5

Plugin OMNICNC 1325 Router : 1.60.17.5

Plugin OptiPlanning : 1.60.17.4

Plugin Ottimo-Perfect Cut : 1.60.17.4

Plugin Point 2 : 1.60.17.4

Plugin Pratika 310 : 1.60.17.5

Plugin Pratika 315 : 1.60.17.5

Plugin Pratika 320 : 1.60.17.5

Plugin Pratika 325 : 1.60.17.5

Plugin PratixS : 1.60.17.5

Plugin Profile Report : 1.60.17.4

Plugin Project 250 : 1.60.17.4

Plugin Project 450 : 1.60.17.4

Plugin Project TF : 1.60.17.4

Plugin PTP : 1.60.17.4

Plugin PTP 160 : 1.60.17.4

Plugin Puchased Item Report : 1.60.17.4

Plugin RouSer Inspire 3S Router : 1.60.17.5

Plugin Router Aspan : 1.60.17.5

Plugin Router EnRouter CNC : 1.60.17.5

Plugin Rover A 1332 : 1.60.17.4

Plugin Rover A 1532 : 1.60.17.5

Plugin Rover A 1625-1632-1643-1659 : 1.60.17.5

Plugin Rover A 3.30 : 1.60.17.4

Plugin Rover C9 : 1.60.17.4

Plugin Rover K FT 1531 : 1.60.17.5

Plugin Rover1836GFT : 1.60.17.4

Plugin Rover20 : 1.60.17.4

Plugin Rover2231GFT : 1.60.17.4

Plugin SCM Pratika 1000 : 1.60.17.5

Plugin SCM Startech cn plus : 1.60.17.5

Plugin SCM Startech cn v : 1.60.17.5

Plugin ShopSabre 4896 Router : 1.60.17.5

Plugin ShopSabre IS Series : 1.60.17.5

Plugin Sideco SIR 1325 ATC Router : 1.60.17.5

Plugin Skipper 100 : 1.60.17.4

Plugin Skipper 130 : 1.60.17.4

Plugin Skipper V31 : 1.60.17.4

Plugin SOPH MSZ600 : 1.60.17.4

Plugin Spazio3D : 1.60.17.4

Plugin Speedy Factory : 1.60.17.4

Plugin Startech : 1.60.17.4

Plugin Tech 99L : 1.60.17.4

Plugin Tech Z1 : 1.60.17.5

Plugin Tech Z2 : 1.60.17.5

Plugin Tech Z25 : 1.60.17.5

Plugin Tech Z30 : 1.60.17.5

Plugin Tech Z5 : 1.60.17.5

Plugin Twister750NX : 1.60.17.4

Plugin Uniflex : 1.60.17.5

Plugin Universal NB-3618 : 1.60.17.5

Plugin Universal NB-3622 : 1.60.17.5

Plugin Universal TV 3615 : 1.60.17.5

Plugin Usaberg ATC 2819 Router : 1.60.17.5

Plugin Usikraft Evoque 2030 ATC Router : 1.60.17.5

Plugin Vantage 24-25-26 series - Nesting : 1.60.17.4

Plugin Venture 107 : 1.60.17.4

Plugin Venture 108 : 1.60.17.4

Plugin Venture 1M : 1.60.17.4

Plugin Venture 22L : 1.60.17.4

Plugin Venture 230M : 1.60.17.4

Plugin Venture 2M : 1.60.17.4

Plugin Venture 316 : 1.60.17.4

Plugin Venture 3M : 1.60.17.4

Plugin Venture 8M : 1.60.17.4

Plugin Vetor Opus : 1.60.17.4

Plugin Vetor Opus 2030 FR Code : 1.60.17.5

Plugin Vetor Opus FR 3020 SP Router : 1.60.17.5

Plugin Vitap Point K2 : 1.60.17.4

Plugin Warehouse Report : 1.60.17.4

Plugin Weeke BHC280 : 1.60.17.4

Plugin Weeke BHT500 : 1.60.16.21

Plugin Weeke Optimat BHC250 : 1.60.17.4

Plugin WIBJ5 : 1.60.17.4

Plugin WPS Optimizer : 1.60.17.4

Plugin X200 CELL - Nesting : 1.60.17.5

Enhancemets

Machine Program
1. Adjusted the Edge band application in inline machining so that you can add the edge only on one side of the part. For more information click here. (1900069)

2. Added parking field in the BIMA machine plug-in. For more information click here. (1900075)

3. Added suction cup suction call in the BIMA machine plug-in. For more information click here. (1882816)

4. Added in the BIMA machine's work areas an option for the customer to inform the machine's work field. For more information click here.

5. Added field to set the rotational speed of the cutter during the process between input and output. Added the field to set the rotational speed of the cutter entering and leaving the workpiece. For more information click here.

Machine program, technical drawing and reports

1. In a Service project, only Builder documentation is generated for those items that are marked as service. For more information, click here.

New Plugins

1. New plugin available Plugin ShopSabre 4896 Router.

2. New plugin available Plugin Sideco SIR 1325 ATC Router.

Corrections

Cut Pro Plugin

1. Fixed the situation where in module items, the System Attribute column was generated empty in the Cut Pro Plugin. (1930882)

Machine program

1. Corrected the situation where an inconsistency was displayed when using the cutter in the vertical direction in projects with coping. To do this, an option to select no coping has been created for the Cyflex S and SR machine. (1931260)

2. Adjusted the machining operations on the Genesis Evo machine, so that the sequential machining operations are generated correctly and the contour is made on the chosen side. (1929637)

3. Corrected the rotation of the vein for the CNC Enroute machine. (1931506)

ERP Reports

1. Fixed situation where unconformity was displayed when generating ERP/Reports with grouped objects attached to a Closets Builder item. (1930143)

Technical Drawing | Machine Program

1. Corrected situation where aluminum profiles with the ALUMINIUM_COMPONENT attribute did not generate contact machining (1928234)

Drawer Body Report

1. In the drawer body report, the unit of measure was corrected to be displayed according to the user's configuration. (1928647)

ERP Integration

1. Fixed situation where folder could be named with spaces in the name, and the system could not find it after creating it.

Program Generation

1. Fixed situation where if the option to generate the Nesting in a separate folder was enabled, the programs were overwritten. (1933021)

Spazio3D Machine Program

1. Corrected the situation where when generating the Spazio 3D program an unconformity occurred that the key provided was not present in the dictionary. (1934495)

Promob ERP

1. Fixed the link directing to the article in Promob ERP database configuration window. (1929691)

2. Fixed the option Save integration .PROMOB version that displays on the screen when Connect 2.0, and when Connect 1.0 it displays option Generate PROMOB file in repository. (1933856)

Cut optimization

1. Fixed a situation where the edge tape on one side was displayed upside down, instead of being in front it was behind. (1897910)

Budget

1. Fixed the situation where Promob updates the GuidBuilder in the budget even when it didn't have the attribute to update, now it only updates if it has the attribute as Y.

Enroute

1. Fixed the situation where the Route Enroute machine did not consider the edge thickness and overcut. (1930250)

▼ 1.60.17.4

Date: 11/23/2022

Released Plugins

Plugin ABL 210 - B : 1.60.17.4

Plugin Accord 40 FX : 1.60.17.4

Plugin Alca Machine Router AL2030 3S : 1.60.17.4

Plugin Alca Machine Router AL2030 ATC : 1.60.17.4

Plugin Alca Maquinas AL2030B : 1.60.17.4

Plugin Asia Robotica CN1325-ATC Router : 1.60.17.4

Plugin Author200 : 1.60.17.4

Plugin Author327 : 1.60.17.4

Plugin Author436S : 1.60.17.4

Plugin Author500 : 1.60.17.4

Plugin AuthorM600 : 1.60.17.4

Plugin BHX055 : 1.60.17.4

Plugin BHX500 : 1.60.17.4

Plugin Biesse Comil Insider FT2 : 1.60.17.4

Plugin BP 195T : 1.60.17.4

Plugin Builder : 1.60.17.4

Plugin Builder Parts : 1.60.17.4

Plugin CMS Maxima 24B : 1.60.17.4

Plugin Cut Pro : 1.60.17.4

Plugin Cyflex 900 : 1.60.17.4

Plugin Cyflex 900BR : 1.60.17.4

Plugin Cyflex HP - CX200 : 1.60.17.4

Plugin Cyflex S e SR : 1.60.17.4

Plugin DRILLTEQ V-200 : 1.60.17.4

Plugin Easy Jet : 1.60.17.4

Plugin ETools Pro ATC 12 2030 Router : 1.60.17.4

Plugin Evolution 7405 : 1.60.17.4

Plugin Flexdrill 61200 : 1.60.17.4

Plugin Giben Flexdrill 6 1000 Evo : 1.60.17.4

Plugin HG 2030 Master : 1.60.17.4

Plugin Holzher Evolution 7401-7402 : 1.60.17.4

Plugin Homag Weeke ABD 100 : 1.60.17.4

Plugin Homag Weeke ABD 250 : 1.60.17.4

Plugin IMA BIMA : 1.60.17.4

Plugin IMA Imagic : 1.60.17.4

Plugin Industrial CNC ARTISAN 408 Router Mach 2-3 : 1.60.17.4

Plugin Integração Promob Production : 1.60.17.4

Plugin ISO Code : 1.60.17.4

Plugin Jaragua CNC Mobile Router 2818 : 1.60.17.4

Plugin Jaragua CNC Mobile TAF Router : 1.60.17.4

Plugin Jaragua CNC TAURUS 2818 : 1.60.17.4

Plugin JaraguaCNC Router Exclusive 28182 : 1.60.17.4

Plugin JaraguaCNC Solid : 1.60.17.4

Plugin JaraguaCNC Vision : 1.60.17.4

Plugin Laguna SmartShop II Router - B.R : 1.60.17.4

Plugin Laguna SmartShop III Router - Fanuc : 1.60.17.4

Plugin Laguna SmartShop SUV Router - B.R : 1.60.17.4

Plugin M400F : 1.60.17.4

Plugin Mach CNC MACHPRO ATC : 1.60.17.4

Plugin Mach CNC Router Elite Super Drill 2819 : 1.60.17.4

Plugin Morbidelli M100 : 1.60.17.4

Plugin Nanxing NCB2412S : 1.60.17.4

Plugin OMNICNC 1325 Router : 1.60.17.4

Plugin Pratika 310 : 1.60.17.4

Plugin Pratika 315 : 1.60.17.4

Plugin Pratika 320 : 1.60.17.4

Plugin Pratika 325 : 1.60.17.4

Plugin PratixS : 1.60.17.4

Plugin RouSer Inspire 3S Router : 1.60.17.4

Plugin Router Aspan : 1.60.17.4

Plugin Router EnRouter CNC : 1.60.17.4

Plugin Rover A 1532 : 1.60.17.4

Plugin Rover A 1625-1632-1643-1659 : 1.60.17.4

Plugin SCM Pratika 1000 : 1.60.17.4

Plugin SCM Startech cn plus : 1.60.17.4

Plugin SCM Startech cn v : 1.60.17.4

Plugin ShopSabre IS Series : 1.60.17.4

Plugin Tech Z1 : 1.60.17.4

Plugin Tech Z2 : 1.60.17.4

Plugin Tech Z25 : 1.60.17.4

Plugin Tech Z30 : 1.60.17.4

Plugin Tech Z5 : 1.60.17.4

Plugin Uniflex : 1.60.17.4

Plugin Universal NB-3618 : 1.60.17.4

Plugin Universal NB-3622 : 1.60.17.4

Plugin Universal TV 3615 : 1.60.17.4

Plugin Usaberg ATC 2819 Router : 1.60.17.4

Plugin Usikraft Evoque 2030 ATC Router : 1.60.17.4

Plugin Vetor Opus 2030 FR Code : 1.60.17.4

Plugin Vetor Opus FR 3020 SP Router : 1.60.17.4

Plugin X200 CELL - Nesting : 1.60.17.4

Enhancemets

New Plugins

1. New plugin available Giben Flexdrill 6 1000.

2. New plugin available Usikraft Evoque 2030 ATC Router.

3. New plugin available Weeke ABD 100.

Machine program

1. Added the option where it generates the Nesting of the Promob Cutting Motor, being ordered by Optimization Mode, that is, by the size of the parts (1829054). For more information visit the article Plugin Builder – Nesting.

10.2.png

2. Added a report of the cut list on Nesting Machines. For more information see the article Plugin Builder – Nesting.

Compatibility

1. Added compatibility with Promob version 5.60.17.14.

Corrections

CNC Configuration

1. Fixed situation where the Gif representing the tool output, was incorrect in the Rover 22 machine settings. (1919109)

2. Fixed situation where the SCM/Morbidelli Plugin, did not import the Maestro milling cutters. (1925141)

Plugin IMA BIMA

1. Fixed situation so that the material is removed gradually when machining the IMA BIMA Plugin.

Machine Configurations

1. Fixed the situation where a unconformity was displayed in the settings, when activating the Startech cn Plugin v (1.0). (1926561)

Machine program

1. Corrected the situation in which the Lower Milling was not selected to execute the operations, therefore, the machine program was not generated. (1929065)

Plugin Pratix S

1. Fixed the situation where the Contour Machining Start field, did not store the new information when changing the selected field option. (1924868)

▼ 1.60.17.2

Date: 26/10/2022

Released Plugins

Plugin ABL 210 - B : 1.60.17.2

Plugin Accord 40 FX : 1.60.17.2

Plugin Alca Machine Router AL2030 3S : 1.60.17.2

Plugin Alca Machine Router AL2030 ATC : 1.60.17.2

Plugin Alca Maquinas AL2030B : 1.60.17.2

Plugin Application of laminates per module report : 1.60.17.2

Plugin Ardis Cutting Optimizer : 1.60.17.2

Plugin Asia Robotica CN1325-ATC Router : 1.60.17.2

Plugin Assembly Report : 1.60.17.2

Plugin Assembly Steel Report : 1.60.17.2

Plugin Author200 : 1.60.17.2

Plugin Author327 : 1.60.17.2

Plugin Author436S : 1.60.17.2

Plugin Author500 : 1.60.17.2

Plugin AuthorM600 : 1.60.17.2

Plugin BHX050 : 1.60.17.2

Plugin BHX055 : 1.60.17.2

Plugin BHX500 : 1.60.17.2

Plugin Biesse Comil Insider FT2 : 1.60.17.2

Plugin Biesse EKO 902 : 1.60.17.2

Plugin Biesse FTT : 1.60.17.2

Plugin Biesse Rover 22 : 1.60.17.2

Plugin Biesse Rover 24 : 1.60.17.2

Plugin Biesse Rover A4 : 1.60.17.2

Plugin Biesse Rover B7 : 1.60.17.2

Plugin Biesse Skill 300 K3 : 1.60.17.2

Plugin BMG110 - Venture 113-114-115 : 1.60.17.2

Plugin Boole Opticut Optimizer : 1.60.17.2

Plugin BP 195T : 1.60.17.2

Plugin Builder : 1.60.17.2

Plugin Builder Budget : 1.60.17.2

Plugin Builder Catalog : 1.60.17.2

Plugin Builder Parts : 1.60.17.2

Plugin Builder View : 1.60.17.2

Plugin Builder Xml : 1.60.17.2

Plugin Buselatto Jet Optima A20-C20-C21 : 1.60.17.2

Plugin C-Express 920 : 1.60.17.2

Plugin CMS Maxima 24B : 1.60.17.2

Plugin Composed Panel Report : 1.60.17.2

Plugin Corte Certo : 1.60.17.2

Plugin CRS Exata Horizontal - Drilling Center : 1.60.17.2

Plugin CRS Exata Vertical 1000 - Drilling Center : 1.60.17.2

Plugin CRS Exata Vertical 1200 - Drilling Center : 1.60.17.2

Plugin Cut List : 1.60.17.2

Plugin Cut Planning : 1.60.17.2

Plugin Cut Pro : 1.60.17.2

Plugin Cut Rite : 1.60.17.2

Plugin Cyflex 900 : 1.60.17.2

Plugin Cyflex 900BR : 1.60.17.2

Plugin Cyflex H800 : 1.60.17.2

Plugin Cyflex HP - CX200 : 1.60.17.2

Plugin Cyflex S e SR : 1.60.17.2

Plugin Door Report : 1.60.17.2

Plugin Drawer Report : 1.60.17.2

Plugin DRILLTEQ V-200 : 1.60.17.2

Plugin Dynestic 7516 : 1.60.17.2

Plugin Easy Jet : 1.60.17.2

Plugin Easynest 3018 A : 1.60.17.2

Plugin Easynest 3021 : 1.60.17.2

Plugin Easynest 4021 : 1.60.17.2

Plugin Edge Band Report : 1.60.17.2

Plugin ERP Focco : 1.60.17.2

Plugin ERP Insight : 1.60.17.2

Plugin ERP Promob : 1.60.17.2

Plugin ERP Standard : 1.60.17.2

Plugin ERP WPS : 1.60.17.2

Plugin ETools Pro ATC 12 2030 Router : 1.60.17.2

Plugin Evolution 7405 : 1.60.17.2

Plugin F9L : 1.60.17.2

Plugin Felder Creator 950 : 1.60.17.2

Plugin Flexdrill 1000 : 1.60.17.2

Plugin Flexdrill 1200 : 1.60.17.2

Plugin Flexdrill 612 KS : 1.60.17.2

Plugin Flexdrill 612 M : 1.60.17.2

Plugin Flexdrill 61200 : 1.60.17.2

Plugin Format4 Profit H08 : 1.60.17.2

Plugin Format4 Profit H20-H22-H22L : 1.60.17.2

Plugin Format4 Profit H80 : 1.60.17.2

Plugin Giben Flat (BDT - Spectra) : 1.60.17.2

Plugin Giben Flat (Selexx - Professional Line - Stratos) : 1.60.17.2

Plugin Giben Genesis EVO : 1.60.17.2

Plugin GPlan : 1.60.17.2

Plugin HG 2030 Master : 1.60.17.2

Plugin Hirzt F10 : 1.60.17.2

Plugin Hirzt F6 : 1.60.17.2

Plugin Hirzt F8 : 1.60.17.2

Plugin Holzer HHOS Optimizer Cut : 1.60.17.2

Plugin Holzher Evolution 7401-7402 : 1.60.17.2

Plugin Holzher Master : 1.60.17.2

Plugin Homag Weeke ABD 250 : 1.60.17.2

Plugin IF-850 Plus : 1.60.17.2

Plugin IF-8500 : 1.60.17.2

Plugin IMA BIMA : 1.60.17.2

Plugin IMA Imagic : 1.60.17.2

Plugin Industrial CNC ARTISAN 408 Router Mach 2-3 : 1.60.17.2

Plugin Integração Promob ERP Start : 1.60.17.2

Plugin Integração Promob Production : 1.60.17.2

Plugin ISO Code : 1.60.17.2

Plugin Jaragua CNC Mobile Router 2818 : 1.60.17.2

Plugin Jaragua CNC Mobile TAF Router : 1.60.17.2

Plugin Jaragua CNC TAURUS 2818 : 1.60.17.2

Plugin JaraguaCNC Router Exclusive 28182 : 1.60.17.2

Plugin JaraguaCNC Solid : 1.60.17.2

Plugin JaraguaCNC Vision : 1.60.17.2

Plugin KN3710 Nesting : 1.60.17.2

Plugin Laguna SmartShop II Router - B.R : 1.60.17.2

Plugin Laguna SmartShop III Router - Fanuc : 1.60.17.2

Plugin Laguna SmartShop SUV Router - B.R : 1.60.17.2

Plugin Lepton Optimizer : 1.60.17.2

Plugin M400F : 1.60.17.2

Plugin Mach CNC MACHPRO ATC : 1.60.17.2

Plugin Mach CNC Router Elite Super Drill 2819 : 1.60.17.2

Plugin Manufacturing Cabinet Report : 1.60.17.2

Plugin Manufacturing Component Report : 1.60.17.2

Plugin Master Drill TF 500 : 1.60.17.2

Plugin Masterwood Nesting MW : 1.60.17.2

Plugin MasterWood Project 415 : 1.60.17.2

Plugin MasterWood Project 465 : 1.60.17.2

Plugin Morbidelli M100 : 1.60.17.2

Plugin Nanxing NCB2412S : 1.60.17.2

Plugin OMNICNC 1325 Router : 1.60.17.2

Plugin OptiPlanning : 1.60.17.2

Plugin Ottimo-Perfect Cut : 1.60.17.2

Plugin Point 2 : 1.60.17.2

Plugin Pratika 310 : 1.60.17.2

Plugin Pratika 315 : 1.60.17.2

Plugin Pratika 320 : 1.60.17.2

Plugin Pratika 325 : 1.60.17.2

Plugin PratixS : 1.60.17.2

Plugin Profile Report : 1.60.17.2

Plugin Project 250 : 1.60.17.2

Plugin Project 450 : 1.60.17.2

Plugin Project TF : 1.60.17.2

Plugin PTP : 1.60.17.2

Plugin PTP 160 : 1.60.17.2

Plugin Puchased Item Report : 1.60.17.2

Plugin RouSer Inspire 3S Router : 1.60.17.2

Plugin Router Aspan : 1.60.17.2

Plugin Router EnRouter CNC : 1.60.17.2

Plugin Rover A 1332 : 1.60.17.2

Plugin Rover A 1532 : 1.60.17.2

Plugin Rover A 1625-1632-1643-1659 : 1.60.17.2

Plugin Rover A 3.30 : 1.60.17.2

Plugin Rover C9 : 1.60.17.2

Plugin Rover K FT 1531 : 1.60.17.3

Plugin Rover1836GFT : 1.60.17.2

Plugin Rover20 : 1.60.17.2

Plugin Rover2231GFT : 1.60.17.2

Plugin SCM Pratika 1000 : 1.60.17.2

Plugin SCM Startech cn plus : 1.60.17.2

Plugin SCM Startech cn v : 1.60.17.2

Plugin ShopSabre IS Series : 1.60.17.2

Plugin Skipper 100 : 1.60.17.2

Plugin Skipper 130 : 1.60.17.2

Plugin Skipper V31 : 1.60.17.2

Plugin SOPH MSZ600 : 1.60.17.2

Plugin Spazio3D : 1.60.17.2

Plugin Speedy Factory : 1.60.17.2

Plugin Startech : 1.60.17.2

Plugin Tech 99L : 1.60.17.2

Plugin Tech Z1 : 1.60.17.2

Plugin Tech Z2 : 1.60.17.2

Plugin Tech Z25 : 1.60.17.2

Plugin Tech Z30 : 1.60.17.2

Plugin Tech Z5 : 1.60.17.2

Plugin Twister750NX : 1.60.17.2

Plugin Uniflex : 1.60.17.2

Plugin Universal NB-3618 : 1.60.17.2

Plugin Universal NB-3622 : 1.60.17.2

Plugin Universal TV 3615 : 1.60.17.2

Plugin Usaberg ATC 2819 Router : 1.60.17.2

Plugin Vantage 24-25-26 series - Nesting : 1.60.17.2

Plugin Venture 107 : 1.60.17.2

Plugin Venture 108 : 1.60.17.2

Plugin Venture 1M : 1.60.17.2

Plugin Venture 22L : 1.60.17.2

Plugin Venture 230M : 1.60.17.2

Plugin Venture 2M : 1.60.17.2

Plugin Venture 316 : 1.60.17.2

Plugin Venture 3M : 1.60.17.2

Plugin Venture 8M : 1.60.17.2

Plugin Vetor Opus : 1.60.17.2

Plugin Vetor Opus 2030 FR Code : 1.60.17.2

Plugin Vetor Opus FR 3020 SP Router : 1.60.17.2

Plugin Vitap Point K2 : 1.60.17.2

Plugin Warehouse Report : 1.60.17.2

Plugin Weeke BHC280 : 1.60.17.2

Plugin Weeke BHT500 : 1.60.16.19

Plugin Weeke Optimat BHC250 : 1.60.17.2

Plugin WIBJ5 : 1.60.17.2

Plugin WPS Optimizer : 1.60.17.2

Plugin X200 CELL - Nesting : 1.60.17.2

Enhancemets

Database Configuration

1. Sustained button to evaluate the connection to the active database service after testing. (1872294)

Focco ERP

1. Added Drawing tag in Focco ERP XML, containing the path to the technical drawing.

New Plugins

1. New plugin available Biesse Comil Insider FT2.
2. New plugin available Biesse Rover K FT 1531 (Machining center CNC). For more information, click here.
3. New plugin available Weeke BHT500 (Machining center CNC). For more information, click here.
4. New plugin available - Usaberg ATC 2819 Router
5. Developed new plugin SPEEDY Factory. For more information, click here.

Pratika 1000, 310, 315, 320 and 325 machines.

1. Added the Absolute Head displacement option for Pratika machines, which uses the zero point of the total working area as a reference for displacement. The relative displacement that uses the zero point of the work area is maintained.

For more information, visit the article Builder - SCM - Pratika - Head Displacement.

Biesse machines with Bsuite integration

1. Added option to enable generation of CSV from Nesting files, when selecting the option of integration system with Nesting = Bsuite. (1744907)

For more information, visit the article Plugin Builder - Biesse Integration.

Worker Services

1. When installing the Worker services, so that the permissions are applied according to what each service needs, the login information of the administrator user of the computer is requested. (1781098)

Corrections

Biesse machines with Bsuite integration

1. Fixed situation where special characters were not removed. (1901102)

ERP Integration

1. Fixed situation in which the productive script of projects with converted geometry was not generated. (1909903)
2. Fixed situation where some entities had failures in ERP integration.
3. Fixed the situation where when creating an integration file with the same name, a nonconformity was generated.

Default ERP

1. Fixed situation where when changing the path of the Default ERP temporary files, these files continued to use the default path. (1902202)

Aspan, Enroute and Maxima 24B

1. Added for DXF machines (Enroute, aspan, Maxima 24b), shaft rotation. (1897396)

Machine program and Technical Drawing

1. Fixed situation where dynamic toolpaths were generated with incorrect rotation when being processed by Plugin Builder or service. (1904177 e 1918265)
2. Fixed situation where programs were incomplete, due to generation failures in the Nesting file of 18 and 25mm parts. (1912694)
3. Fixed situation where in the existence of programs A and B, the machine programs were not generated. (1915193)

4. Fixed the situation where incorrect models were displayed for each face of the technical drawing. (1903966)

5. Fixed situation where rectangular toolpaths rotated 90 degrees in machine program. (1905112)

Working area

1. Fixed the situation where when changing the machine's Desktop settings, the settings returned to 0. (1900082)

Plugin Cyflex S and SR

1. Added the Suction Hood option in the cutter settings. (1857489, 1888740 e 1905803)

Nesting file configuration

1. Fixed the situation in the files tab where when selecting the Generate Workbook option, failures occurred. (1919750)

Plugin BHX500

1. Fixed situation where the configured cutter output type was not respected in the machines program. (1898502)

2. Fixed the situation where the machining depth did not allow the cutter to contact the part. (1898502)

Plugin IF8500

1. Fixed the situation in the machine program where the tear center on the IF8500 machine did not start at the correct point. (1907065)

Plugin Jaraguá CNC Vision

1. Added the lowering of the cutter in circular mode in circular machining on the Jaragua CNC Vision machine. (1910887)

Rover 1836GFT

1. Fixed situation where some materials were not displayed in Rover 1836GFT machine programming XML . (1915760)

2. Fixed the situation where the shaft direction information was incorrect when integrating the Bsuite3 in the Rover 1836GFT machine. (1914600)

Plugins CNC

1. Fixed the situation where the machines files were not updated correctly when opening Promob. (1804463)

Builder Parts

1. Fixed the situation where when creating a part from a selected geometry/composition, a nonconformity was generated. (1912308 e 1913711)

2. Fixed the situation where when selecting the option to replace a part, created from another by Builder Parts, both parts remained in the environment. (1859234)

Promob opening

1. Fixed situation where when opening Promob without internet connection, there was a nonconformity.

Cut Plan Files and Catalog

1. Fixed situation in which when registering a module with attribute Component=True, the message to review the module registration was displayed.

CNC Configuration

1. Fixed situation where when importing tools with empty file path, a nonconformity was displayed.

2. Fixed situation where when importing dynamic machines, it caused conflicts in the settings.

3. Fixed Spanish translation in Biesse Rover 22 machine texts. (1913265)

▼ 1.60.17.0

Date: 17/10/2022

Available from version 5.60.17.6 Promob or superior.

Released Plugins

Plugin ABL 210 - B : 1.60.17.0

Plugin Accord 40 FX : 1.60.17.0

Plugin Alca Machine Router AL2030 3S : 1.60.17.0

Plugin Alca Machine Router AL2030 ATC : 1.60.17.0

Plugin Alca Maquinas AL2030B : 1.60.17.0

Plugin Application of laminates per module report : 1.60.17.0

Plugin Ardis Cutting Optimizer : 1.60.17.0

Plugin Asia Robotica CN1325-ATC Router : 1.60.17.0

Plugin Assembly Report : 1.60.17.0

Plugin Assembly Steel Report : 1.60.17.0

Plugin Author200 : 1.60.17.0

Plugin Author327 : 1.60.17.0

Plugin Author436S : 1.60.17.0

Plugin Author500 : 1.60.17.0

Plugin AuthorM600 : 1.60.17.0

Plugin BHX050 : 1.60.17.0

Plugin BHX055 : 1.60.17.0

Plugin BHX500 : 1.60.17.0

Plugin Biesse EKO 902 : 1.60.17.0

Plugin Biesse FTT : 1.60.17.0

Plugin Biesse Rover 22 : 1.60.17.0

Plugin Biesse Rover 24 : 1.60.17.0

Plugin Biesse Rover A4 : 1.60.17.0

Plugin Biesse Rover B7 : 1.60.17.0

Plugin Biesse Skill 300 K3 : 1.60.17.0

Plugin BMG110 - Venture 113-114-115 : 1.60.17.0

Plugin Boole Opticut Optimizer : 1.60.17.0

Plugin BP 195T : 1.60.17.0

Plugin Builder : 1.60.17.0

Plugin Builder Budget : 1.60.17.0

Plugin Builder Catalog : 1.60.17.0

Plugin Builder Parts : 1.60.17.0

Plugin Builder View : 1.60.17.0

Plugin Builder Xml : 1.60.17.0

Plugin Buselatto Jet Optima A20-C20-C21 : 1.60.17.0

Plugin C-Express 920 : 1.60.17.0

Plugin CMS Maxima 24B : 1.60.17.0

Plugin Composed Panel Report : 1.60.17.0

Plugin Corte Certo : 1.60.17.0

Plugin CRS Exata Horizontal - Drilling Center : 1.60.17.0

Plugin CRS Exata Vertical 1000 - Drilling Center : 1.60.17.0

Plugin CRS Exata Vertical 1200 - Drilling Center : 1.60.17.0

Plugin Cut List : 1.60.17.0

Plugin Cut Planning : 1.60.17.0

Plugin Cut Pro : 1.60.17.0

Plugin Cut Rite : 1.60.17.0

Plugin Cyflex 900 : 1.60.17.0

Plugin Cyflex 900BR : 1.60.17.0

Plugin Cyflex H800 : 1.60.17.0

Plugin Cyflex HP - CX200 : 1.60.17.0

Plugin Cyflex S e SR : 1.60.17.0

Plugin Door Report : 1.60.17.0

Plugin Drawer Report : 1.60.17.0

Plugin DRILLTEQ V-200 : 1.60.17.0

Plugin Dynestic 7516 : 1.60.17.0

Plugin Easy Jet : 1.60.17.0

Plugin Easynest 3018 A : 1.60.17.0

Plugin Easynest 3021 : 1.60.17.0

Plugin Easynest 4021 : 1.60.17.0

Plugin Edge Band Report : 1.60.17.0

Plugin ERP Focco : 1.60.17.0

Plugin ERP Insight : 1.60.17.0

Plugin ERP Promob : 1.60.17.0

Plugin ERP Standard : 1.60.17.0

Plugin ERP WPS : 1.60.17.0

Plugin ETools Pro ATC 12 2030 Router : 1.60.17.0

Plugin Evolution 7405 : 1.60.17.0

Plugin F9L : 1.60.17.0

Plugin Felder Creator 950 : 1.60.17.0

Plugin Flexdrill 1000 : 1.60.17.0

Plugin Flexdrill 1200 : 1.60.17.0

Plugin Flexdrill 612 KS : 1.60.17.0

Plugin Flexdrill 612 M : 1.60.17.0

Plugin Flexdrill 61200 : 1.60.17.0

Plugin Format4 Profit H08 : 1.60.17.0

Plugin Format4 Profit H20-H22-H22L : 1.60.17.0

Plugin Format4 Profit H80 : 1.60.17.0

Plugin Giben Flat (BDT - Spectra) : 1.60.17.0

Plugin Giben Flat (Selexx - Professional Line - Stratos) : 1.60.17.0

Plugin Giben Genesis EVO : 1.60.17.0

Plugin GPlan : 1.60.17.0

Plugin HG 2030 Master : 1.60.17.0

Plugin Hirzt F10 : 1.60.17.0

Plugin Hirzt F6 : 1.60.17.0

Plugin Hirzt F8 : 1.60.17.0

Plugin Holzer HHOS Optimizer Cut : 1.60.17.0

Plugin Holzher Evolution 7401-7402 : 1.60.17.0

Plugin Holzher Master : 1.60.17.0

Plugin IF-850 Plus : 1.60.17.0

Plugin IF-8500 : 1.60.17.0

Plugin IMA BIMA : 1.60.17.0

Plugin IMA Imagic : 1.60.17.0

Plugin Industrial CNC ARTISAN 408 Router Mach 2-3 : 1.60.17.0

Plugin Integração Promob ERP Start : 1.60.17.0

Plugin Integração Promob Production : 1.60.17.0

Plugin ISO Code : 1.60.17.0

Plugin Jaragua CNC Mobile Router 2818 : 1.60.17.0

Plugin Jaragua CNC Mobile TAF Router : 1.60.17.0

Plugin Jaragua CNC TAURUS 2818 : 1.60.17.0

Plugin JaraguaCNC Router Exclusive 28182 : 1.60.17.0

Plugin JaraguaCNC Solid : 1.60.17.0

Plugin JaraguaCNC Vision : 1.60.17.0

Plugin KN3710 Nesting : 1.60.17.0

Plugin Laguna SmartShop II Router - B.R : 1.60.17.0

Plugin Laguna SmartShop III Router - Fanuc : 1.60.17.0

Plugin Laguna SmartShop SUV Router - B.R : 1.60.17.0

Plugin Lepton Optimizer : 1.60.17.0

Plugin M400F : 1.60.17.0

Plugin Mach CNC MACHPRO ATC : 1.60.17.0

Plugin Mach CNC Router Elite Super Drill 2819 : 1.60.17.0

Plugin Manufacturing Cabinet Report : 1.60.17.0

Plugin Manufacturing Component Report : 1.60.17.0

Plugin Master Drill TF 500 : 1.60.17.0

Plugin Masterwood Nesting MW : 1.60.17.0

Plugin MasterWood Project 415 : 1.60.17.0

Plugin MasterWood Project 465 : 1.60.17.0

Plugin Morbidelli M100 : 1.60.17.0

Plugin Nanxing NCB2412S : 1.60.17.0

Plugin OMNICNC 1325 Router : 1.60.17.0

Plugin OptiPlanning : 1.60.17.0

Plugin Ottimo-Perfect Cut : 1.60.17.0

Plugin Point 2 : 1.60.17.0

Plugin Pratika 310 : 1.60.17.0

Plugin Pratika 315 : 1.60.17.0

Plugin Pratika 320 : 1.60.17.0

Plugin Pratika 325 : 1.60.17.0

Plugin PratixS : 1.60.17.0

Plugin Profile Report : 1.60.17.0

Plugin Project 250 : 1.60.17.0

Plugin Project 450 : 1.60.17.0

Plugin Project TF : 1.60.17.0

Plugin PTP : 1.60.17.0

Plugin PTP 160 : 1.60.17.0

Plugin Puchased Item Report : 1.60.17.0

Plugin RouSer Inspire 3S Router : 1.60.17.0

Plugin Router Aspan : 1.60.17.0

Plugin Router EnRouter CNC : 1.60.17.0

Plugin Rover A 1332 : 1.60.17.0

Plugin Rover A 1532 : 1.60.17.0

Plugin Rover A 1625-1632-1643-1659 : 1.60.17.0

Plugin Rover A 3.30 : 1.60.17.0

Plugin Rover C9 : 1.60.17.0

Plugin Rover1836GFT : 1.60.17.0

Plugin Rover20 : 1.60.17.0

Plugin Rover2231GFT : 1.60.17.0

Plugin SCM Pratika 1000 : 1.60.17.0

Plugin SCM Startech cn plus : 1.60.17.0

Plugin SCM Startech cn v : 1.60.17.0

Plugin ShopSabre IS Series : 1.60.17.0

Plugin Skipper 100 : 1.60.17.0

Plugin Skipper 130 : 1.60.17.0

Plugin Skipper V31 : 1.60.17.0

Plugin SOPH MSZ600 : 1.60.17.0

Plugin Spazio3D : 1.60.17.0

Plugin Startech : 1.60.17.0

Plugin Tech 99L : 1.60.17.0

Plugin Tech Z1 : 1.60.17.0

Plugin Tech Z2 : 1.60.17.0

Plugin Tech Z25 : 1.60.17.0

Plugin Tech Z30 : 1.60.17.0

Plugin Tech Z5 : 1.60.17.0

Plugin Twister750NX : 1.60.17.0

Plugin Uniflex : 1.60.17.0

Plugin Universal NB-3618 : 1.60.17.0

Plugin Universal NB-3622 : 1.60.17.0

Plugin Universal TV 3615 : 1.60.17.0

Plugin Vantage 24-25-26 series - Nesting : 1.60.17.0

Plugin Venture 107 : 1.60.17.0

Plugin Venture 108 : 1.60.17.0

Plugin Venture 1M : 1.60.17.0

Plugin Venture 22L : 1.60.17.0

Plugin Venture 230M : 1.60.17.0

Plugin Venture 2M : 1.60.17.0

Plugin Venture 316 : 1.60.17.0

Plugin Venture 3M : 1.60.17.0

Plugin Venture 8M : 1.60.17.0

Plugin Vetor Opus : 1.60.17.0

Plugin Vetor Opus 2030 FR Code : 1.60.17.0

Plugin Vetor Opus FR 3020 SP Router : 1.60.17.0

Plugin Vitap Point K2 : 1.60.17.0

Plugin Warehouse Report : 1.60.17.0

Plugin Weeke BHC280 : 1.60.17.0

Plugin Weeke Optimat BHC250 : 1.60.17.0

Plugin WIBJ5 : 1.60.17.0

Plugin WPS Optimizer : 1.60.17.0

Plugin X200 CELL - Nesting : 1.60.17.0

Corrections

Plugin Rover 24

1. Fixed the situation where when generating CNC files, the rounded parts moved in the program. (1916653)

Plugin Pratika 315

1. Fixed the situation where, when there were irregular pieces, that is, pieces with an L corner or with angles, rounding or overcut, they had the wrong angle. (1916682)