Builder - Release Notes 1.60 – Promob Support

IMPORTANT: The releases are made gradually, so it is possible that your Builder plugin is not in the latest version.

To check changes from previous versions click here.

Check out the latest Builder news below:

1.60.15.6

Released Plugins

Plugin Accord 40 FX : 1.60.15.6
Plugin Application of laminates per module report : 1.60.15.6
Plugin Ardis Cutting Optimizer : 1.60.15.6
Plugin Assembly Report : 1.60.15.6
Plugin Assembly Steel Report : 1.60.15.6
Plugin Author200 : 1.60.15.6
Plugin Author327 : 1.60.15.6
Plugin Author436S : 1.60.15.6
Plugin Author500 : 1.60.15.6
Plugin AuthorM600 : 1.60.15.6
Plugin BHX050 : 1.60.15.6
Plugin BHX055 : 1.60.15.6
Plugin BHX500 : 1.60.15.6
Plugin Biesse EKO 902 : 1.60.15.6
Plugin Biesse FTT : 1.60.15.6
Plugin Biesse Rover 24 : 1.60.15.6
Plugin Biesse Rover A4 : 1.60.15.6
Plugin Biesse Rover B7 : 1.60.15.6
Plugin Biesse Skill 300 K3 : 1.60.15.6
Plugin BMG110 - Venture 113-114-115 : 1.60.15.6
Plugin Builder : 1.60.15.6
Plugin Builder Budget : 1.60.15.6
Plugin Builder Catalog : 1.60.15.6
Plugin Builder Parts : 1.60.15.6
Plugin Builder View : 1.60.15.6
Plugin Builder Xml : 1.60.15.6
Plugin Buselatto Jet Optima A20-C20-C21 : 1.60.15.6
Plugin C-Express 920 : 1.60.15.6
Plugin Composed Panel Report : 1.60.15.6
Plugin Corte Certo : 1.60.15.6
Plugin CRS Exata Horizontal - Drilling Center : 1.60.15.6
Plugin CRS Exata Vertical 1000 - Drilling Center : 1.60.15.6
Plugin CRS Exata Vertical 1200 - Drilling Center : 1.60.15.6
Plugin Cut List : 1.60.15.6
Plugin Cut Planning : 1.60.15.6
Plugin Cut Pro : 1.60.15.6
Plugin Cut Rite : 1.60.15.6
Plugin Cyflex 900 : 1.60.15.6
Plugin Cyflex 900BR : 1.60.15.6
Plugin Cyflex H800 : 1.60.15.6
Plugin Cyflex HP - CX200 : 1.60.15.6
Plugin Cyflex S e SR : 1.60.15.6
Plugin Door Report : 1.60.15.6
Plugin Drawer Report : 1.60.15.6
Plugin DRILLTEQ V-200 : 1.60.15.6
Plugin Dynestic 7516 : 1.60.15.6
Plugin Easy Jet : 1.60.15.6
Plugin Easynest 3018 A : 1.60.15.6
Plugin Easynest 3021 : 1.60.15.6
Plugin Easynest 4021 : 1.60.15.6
Plugin Edge Band Report : 1.60.15.6
Plugin ERP Focco : 1.60.15.6
Plugin ERP Insight : 1.60.15.6
Plugin ERP Promob : 1.60.15.6
Plugin ERP Standard : 1.60.15.6
Plugin ERP WPS : 1.60.15.6
Plugin Evolution 7405 : 1.60.15.6
Plugin F9L : 1.60.15.6
Plugin Felder Creator 950 : 1.60.15.6
Plugin Flexdrill 1000 : 1.60.15.6
Plugin Flexdrill 1200 : 1.60.15.6
Plugin Flexdrill 61200 : 1.60.15.6
Plugin Format4 Profit H08 : 1.60.15.6
Plugin Format4 Profit H20-H22-H22L : 1.60.15.6
Plugin Giben Flat (BDT - Spectra) : 1.60.15.6
Plugin Giben Flat (Selexx - Professional Line - Stratos) : 1.60.15.6
Plugin Giben Genesis EVO : 1.60.15.6
Plugin GPlan : 1.60.15.6
Plugin Hirzt F10 : 1.60.15.6
Plugin Hirzt F6 : 1.60.15.6
Plugin Hirzt F8 : 1.60.15.6
Plugin Holzer HHOS Optimizer Cut : 1.60.15.6
Plugin Holzher Evolution 7401-7402 : 1.60.15.6
Plugin Holzher Master : 1.60.15.6
Plugin IF-850 Plus : 1.60.15.6
Plugin IF-8500 : 1.60.15.6
Plugin IMA Imagic : 1.60.15.6
Plugin Integração Promob ERP Start : 1.60.15.6
Plugin Integração Promob Production : 1.60.15.6
Plugin ISO Code : 1.60.15.6
Plugin Lepton Optimizer : 1.60.15.6
Plugin M400F : 1.60.15.6
Plugin Manufacturing Cabinet Report : 1.60.15.6
Plugin Manufacturing Component Report : 1.60.15.6
Plugin Master Drill TF 500 : 1.60.15.6
Plugin Masterwood Nesting MW : 1.60.15.6
Plugin MasterWood Project 415 : 1.60.15.6
Plugin MasterWood Project 465 : 1.60.15.6
Plugin Morbidelli M100 : 1.60.15.6
Plugin OptiPlanning : 1.60.15.6
Plugin Ottimo-Perfect Cut : 1.60.15.6
Plugin Point 2 : 1.60.15.6
Plugin Pratika 310 : 1.60.15.6
Plugin Pratika 315 : 1.60.15.6
Plugin Pratika 320 : 1.60.15.6
Plugin Pratika 325 : 1.60.15.6
Plugin PratixS : 1.60.15.6
Plugin Profile Report : 1.60.15.6
Plugin Project 250 : 1.60.15.6
Plugin Project 450 : 1.60.15.6
Plugin Project TF : 1.60.15.6
Plugin PTP : 1.60.15.6
Plugin PTP 160 : 1.60.15.6
Plugin Puchased Item Report : 1.60.15.6
Plugin Router EnRouter CNC : 1.60.15.6
Plugin Rover A 1332 : 1.60.15.6
Plugin Rover A 1625-1632-1643-1659 : 1.60.15.6
Plugin Rover A 3.30 : 1.60.15.6
Plugin Rover C9 : 1.60.15.6
Plugin Rover1836GFT : 1.60.15.6
Plugin Rover20 : 1.60.15.6
Plugin Rover2231GFT : 1.60.15.6
Plugin SCM Startech cn v : 1.60.15.6
Plugin ShopSabre IS Series : 1.60.15.6
Plugin Skipper 100 : 1.60.15.6
Plugin Skipper 130 : 1.60.15.6
Plugin Skipper V31 : 1.60.15.6
Plugin SOPH MSZ600 : 1.60.15.6
Plugin Spazio3D : 1.60.15.6
Plugin Startech : 1.60.15.6
Plugin Tech 99L : 1.60.15.6
Plugin Tech Z1 : 1.60.15.6
Plugin Tech Z2 : 1.60.15.6
Plugin Tech Z25 : 1.60.15.6
Plugin Tech Z30 : 1.60.15.6
Plugin Tech Z5 : 1.60.15.6
Plugin Twister750NX : 1.60.15.6
Plugin Uniflex : 1.60.15.6
Plugin Universal NB-3618 : 1.60.15.6
Plugin Universal NB-3622 : 1.60.15.6
Plugin Universal TV 3615 : 1.60.15.6
Plugin Vantage 24-25-26 series - Nesting : 1.60.15.6
Plugin Venture 107 : 1.60.15.6
Plugin Venture 108 : 1.60.15.6
Plugin Venture 1M : 1.60.15.6
Plugin Venture 22L : 1.60.15.6
Plugin Venture 2M : 1.60.15.6
Plugin Venture 316 : 1.60.15.6
Plugin Venture 3M : 1.60.15.6
Plugin Venture 8M : 1.60.15.6
Plugin Vetor Opus : 1.60.15.6
Plugin Vitap Point K2 : 1.60.15.6
Plugin Warehouse Report : 1.60.15.6
Plugin Weeke BHC280 : 1.60.15.6
Plugin Weeke Optimat BHC250 : 1.60.15.6
Plugin WIBJ5 : 1.60.15.6
Plugin WPS Optimizer : 1.60.15.6

Enhancements

ERP Integration, ERP Start, Insight, Production
1. The validation of the Unique_ID code duplicated in the integration was made available. For more information, click here.

Machine plugins: ISO Code, Startech cn v and Shop Sabre
1. Added the progress bar when generating programs on some machines.

Focco Integration Plugin
1. Added option to Display items without structure in the list of structures, in the settings of the Focco Integration Plugin.

2. Added Display CAD3D_UNIQUE_ID option for items in the Roadmap in the Focco Integration Plugin settings.

Composed Panel
1. Provided the option to register operations on the Builder tab in Composed Panel (module). For more information, click here.

Machine Plugins

1. Added a warning informing that there will be replacement of existing files in the same folder, if they have the same name.

Corrections

IF-8500 Machine Plugin
1. Corrected the situation in which the holes in the profile face had the measurements reversed in the IF-8500 machine. (1714101)

Pratix S Machine Plugin
1. Adjusted the direction of the arc commands on the PratixS, as they were inverted. (1711835)

SCM Machine Plugin
1. Made adjustment to Nesting file format to support accented characters. (1712462)

Flexdrill 1200 Machine Plugin
1. Corrected the situation where the alignment of the milling in machining operations was performed incorrectly.

Technical drawing and report plugins
1. Fixed situation where Chinese characters were not displayed on reports. (1707924)

Machine Plugins with Cloud Service
1. Corrected the situation where the parts were not associated with CNC and a unconformity was displayed. (1714040)

Plugins that generate GWFX files
1. Corrected the command referring to arc in programs with GWFX format. (1714764)

Builder cloud services
1. Fixed the situation where you could not connect to Builder cloud services due to incorrect validation. (1710397)

CNCs Configruation
1. Corrected the situation where GIFs were not reproduced correctly in the CNCs Settings.

Budget | Integrations
1. Fixed a situation where an unconformity was displayed if the border thickness was invalid.

BHX055 Machine Plugin
1. Corrected the situation where the option Generate parts .inf file without operation was not available for the BHX 055 machine. (1705478)

Machine Plugin Cyflex S and SR | Morbidelli machines
1. Corrected the situation where the value set in the Suction Hood Position option on Cyflex S & SR machines was not saved correctly. (1718380)

Gplan Cutting Plan Plugin | Optimizers configuration
1. Fixed the situation that if Gplan was not installed, an inconsistency was displayed when saving changes to Optimizer Settings. (1686826)

Builder Parts Plugin
1. Corrected the situation where the Cabinet Builder parts were positioned incorrectly in the module when replaced by one of the Plugin Builder Parts. (1718334)
IMPORTANT: The option of replacing parts in cabinet builder modules has been disabled.

Promob Maker
1. Corrected the situation where information needed for the cutting plan was not sent correctly if the system was Maker NA.

Uniflex Machine Plugin
1. Corrected the situation in which the work area identification configuration was not sent correctly to the program when integrating with Xilog on the Uniflex machine.

Promob Worker
1. Corrected the situation in which the processing of specific projects was not completed. (1720733)

Integrations
1. Corrected the situation in which the quantity of operations was presented multiplied in the integration XML. (1719408)
2. Corrected the situation where there was no node configured for some parts. For this, the option Validate Configured Node was added in the settings of the Integration Plugins. (1723628)

Technical drawings
1. Corrected the situation where the measure of the entered dimensions was shown with an incorrect value if the configured unit of measure was in inches. (1722111)

1.60.15.5

Promob minimum version 5.60.15.61

Released Plugins

Plugin Ardis Cutting Optimizer : 1.60.15.3

Plugin BHX055 : 1.60.15.3

Plugin Builder : 1.60.15.5

Plugin Builder Budget : 1.60.15.5

Plugin Builder Parts : 1.60.15.5

Plugin Corte Certo : 1.60.15.3

Plugin CRS Exata Horizontal - Drilling Center : 1.60.15.4

Plugin Cut List : 1.60.15.3

Plugin Cut Planning : 1.60.15.3

Plugin Cut Pro : 1.60.15.4

Plugin Cut Rite : 1.60.15.3

Plugin Cyflex S e SR : 1.60.15.5

Plugin Evolution 7405 : 1.60.15.5

Plugin GPlan : 1.60.15.3

Plugin Holzer HHOS Optimizer Cut : 1.60.15.4

Plugin Holzher Evolution 7401-7402 : 1.60.15.5

Plugin IMA Imagic : 1.60.15.5

Plugin Integração Promob Production : 1.60.15.5

Plugin Lepton Optimizer : 1.60.15.3

Plugin Master Drill TF 500 : 1.60.15.2

Plugin Morbidelli M100 : 1.60.15.5

Plugin OptiPlanning : 1.60.15.3

Plugin Ottimo-Perfect Cut : 1.60.15.3

Plugin Router EnRouter CNC : 1.60.15.5

Plugin Rover A 1625-1632-1643-1659 : 1.60.15.3

Plugin ShopSabre IS Series : 1.60.15.6

Plugin Skipper 100 : 1.60.15.4

Plugin Skipper 130 : 1.60.15.4

Plugin Skipper V31 : 1.60.15.3

Plugin Spazio3D : 1.60.15.4

Plugin WPS Optimizer : 1.60.15.3

Enhancements

Plugin Rover 1625

1. The generation of Plugin Rover 1625 series programs has been migrated to cloud services.

Test Collector Tool

1. Integration with the Test Collector tool available.

Plugin Startech cn v

1. Added the option to group programs in the Plugin Startech cn v.

Plugin ISO Code | Plugin Startech cn v

1.Improvement of visual identity and addition of missing functions in the CNCs settings screen for ISO Code Plugin and Plugin Startech cn v.

Plugin ShopSabre IS Series

1. The new ShopSabre IS Series plugin is available.

Corrections

Wildcard Materials

1. Corrected the situation in which when applying an external texture directly from the Materials - Favorites tab for several different pieces, when sending to the cut it was requested to register a material for each piece where it was applied. (1684791)

Budget | Integration

1. Corrected the situation where some projects were generated without the productive script in xml via ERP integration. (1682404)

2. Corrected the situation where some projects were generated without the productive script in xml via ERP integration. (1682404)

Skipper V31

1. Corrected the situation where milling operations did not consider the machine restrictions in the programs generated by Plugin Skipper V31. (1700072)

Machining | BHX055 Plugin

1. Corrected the situation where the minimum positions for drilling were not considered in the programs generated by the BHX055 Plugin. (1701263)

Machine Programs

1. Corrected the situation in the Masterwood Project 415 Plugin, in which when generating the integration of a part with in-line machining registered on the left and right side of the part, a unconformity was generated.

2. Corrected the situation where the Easynest 3018A plugin did not generate a specific drawer program. (1706977)

Labels

1. Corrected the situation in which the labels were displayed unconfigured. (1703905)

Plugin Builder Parts

1. Corrected the situation that the machined contour applied when creating a part by Builder Parts was not saved. (1703992)

2. Corrected the situation where the dynamic holes were not received by another processed item. (1707227)

CNCs Settings Screen

1. Corrected the situation in which an incorrect validation occurred in the ISSO Plugin that prevented the saving of the CNCs settings. (1705947)

Plugin Cut Pro

1. Corrected the situation in which the PROJECT CODE column in the .csv file generated by Plugin Cut Pro always had a value of 0 (zero). (1705347)

Integrations

1. Corrected the unconformity that was displayed when generating integration with Plugin Production. (1705960)

2. Fixed the situation where no technical drawing was generated for items that did not have machine programs.

Plugin EnRoute

1. Fixed the situation in which the registration of a contour tool was requested even when one already existed in the EnRoute Plugin. (1706281)

ERP Start | Integration

1. Fixed the situation where some rack drilling code was missing in ERP integration. (1706680)

Plugin Exata Horizontal

1. Corrected the situation where the drill were displayed outside the faces in the program generation in CRS Exata Horizontal. (1709505)

Plugin Skipper 100 | Skipper 130

1. Corrected a situation in which there was unconformity when selecting the machining tool with linked process in Skipper100. (1706343)

Plugin Exata Vertical 1200

1. Corrected the situation where the information on the depth of machining operations was incorrect. (1708651)

SCM machine plugins with Maestro Superior

1. Corrected the situation in which when generating the CNC programs, the file in the Nesting folder did not display the machining operations, it only considered the face with holes in Universal NB-3618. (1709039)

2. Adjusted so that the depth of the last pass considers only the outline of Nesting in the Universal Plugin NB-3618. (1711397)

Bugdet

1. Corrected the unconformity that was displayed when creating the part description for an entity with an altered dimension. (1707993)

1.60.15.4

Minimum version of Promob Worker 6.60.07

Released Plugins

Plugin Accord 40 FX : 1.60.15.3

Plugin Application of laminates per module report : 1.60.15.3

Plugin Assembly Report : 1.60.15.3

Plugin Assembly Steel Report : 1.60.15.3

Plugin Author200 : 1.60.15.4

Plugin Author327 : 1.60.15.4

Plugin Author436S : 1.60.15.4

Plugin Author500 : 1.60.15.4

Plugin AuthorM600 : 1.60.15.3

Plugin BHX500 : 1.60.15.3

Plugin Builder : 1.60.15.4

Plugin Builder Budget : 1.60.15.4

Plugin Builder Catalog : 1.60.15.4

Plugin Builder Parts : 1.60.15.4

Plugin Composed Panel Report : 1.60.15.3

Plugin CRS Exata Horizontal - Drilling Center : 1.60.15.3

Plugin CRS Exata Vertical 1000 - Drilling Center : 1.60.15.3

Plugin CRS Exata Vertical 1200 - Drilling Center : 1.60.15.3

Plugin Cut Pro : 1.60.15.3

Plugin Cyflex 900 : 1.60.15.4

Plugin Cyflex 900BR : 1.60.15.4

Plugin Cyflex HP - CX200 : 1.60.15.4

Plugin Cyflex S e SR : 1.60.15.4

Plugin Door Report : 1.60.15.3

Plugin Drawer Report : 1.60.15.3

Plugin Easy Jet : 1.60.15.3

Plugin Edge Band Report : 1.60.15.3

Plugin ERP Focco : 1.60.15.3

Plugin ERP Insight : 1.60.15.4

Plugin ERP Promob : 1.60.15.3

Plugin ERP Standard : 1.60.15.3

Plugin ERP WPS : 1.60.15.3

Plugin Evolution 7405 : 1.60.15.4

Plugin Holzer HHOS Optimizer Cut : 1.60.15.3

Plugin Holzher Evolution 7401-7402 : 1.60.15.4

Plugin IMA Imagic : 1.60.15.4

Plugin Integração Promob ERP Start : 1.60.15.3

Plugin Integração Promob Production : 1.60.15.4

Plugin ISO Code : 1.60.15.3

Plugin M400F : 1.60.15.4

Plugin Manufacturing Cabinet Report : 1.60.15.3

Plugin Manufacturing Component Report : 1.60.15.3

Plugin Master Drill TF 500 : 1.60.15.1

Plugin Morbidelli M100 : 1.60.15.4

Plugin Pratika 310 : 1.60.15.4

Plugin Pratika 315 : 1.60.15.4

Plugin Pratika 320 : 1.60.15.4

Plugin Pratika 325 : 1.60.15.4

Plugin PratixS : 1.60.15.4

Plugin Profile Report : 1.60.15.3

Plugin Puchased Item Report : 1.60.15.3

Plugin Router EnRouter CNC : 1.60.15.4

Plugin Skipper 100 : 1.60.15.3

Plugin Skipper 130 : 1.60.15.3

Plugin SOPH MSZ600 : 1.60.15.5

Plugin Spazio3D : 1.60.15.3

Plugin Tech 99L : 1.60.15.3

Plugin Tech Z1 : 1.60.15.4

Plugin Tech Z2 : 1.60.15.4

Plugin Tech Z25 : 1.60.15.4

Plugin Tech Z30 : 1.60.15.4

Plugin Tech Z5 : 1.60.15.4

Plugin Uniflex : 1.60.15.4

Plugin Universal NB-3618 : 1.60.15.4

Plugin Universal NB-3622 : 1.60.15.4

Plugin Universal TV 3615 : 1.60.15.4

Plugin Warehouse Report : 1.60.15.3

Enhancements

Skipper100 and Skipper 130 programs

1. Added machining option to the Project TF100 Machine Plugin. (1433484)

Insight ERP integration

1. The option to configure a standard generation path for integration with the Insight ERP Integration Plugin was made available. For more information, click here.

2. No more files will be generated on the server for Insight ERP Integration.

3. Elements with empty values will no longer be displayed in the Insight ERP Integration xml.

MasterDrill TF500 Machine

1. Available the MasterWood Plugin.

SOPH MSZ600 Machine

1. Available the SOPH MSZ600 Plugin.

Reports

1. Improvement in the translation of reports into English.

Integration

1. In the Integration, the partner element will be displayed, when configured in the library.

Corrections

Quotas | Technical Drawings | Labels

1. Corrected the situation where the quotas were not displayed on the labels and technical drawing. (1648404)

Maestro Integration Machines

1. Corrected the situation where an improper bypass operation was added in Maestro versions 1.00.014 or higher. (1689813)

SCM machines

1. Corrected the situation where the ramp entry value was incorrect at TechZ2. (1694370)

2. Fixed the situation where the Universal NB-3618 Ramp Entry / Exit distance was incorrect. For more information, click here. (1694662)

Cut Pro | Material purchase report

1. Fixed the situation where some Structures were not displayed in the Cut Pro Shopping list.

Integration

1. Corrected the unconformity that was displayed when generating Insight integration. (1683006)

Cut Pro | Composed Panel

1. Corrected the situation where unconformity was displayed when generating Cut Pro when there were composed panelin the project with a wildcard applied. (1694736)

Document generation

1. Corrected the situation where the IDs of the entities that were no longer available in the library, but were in previously created projects, were not displayed. (1681351)

EnRoute Router Machine

1. Corrected the situation where rectangular machining with rounded corners had the radius inverted in the EnRoute machine program. (1697973)

Edge Band Registration

1. Corrected the situation where unconformity was displayed when changing the Edge band thickness in Operation Standards. (1698420)

CNC programs | BHX500 Plugin

1. Corrected the situation in which the milling registered in the Plugin BHX500 did not work on more than one face of the part. (1701758)

Builder tab entries

1. Corrected the unconformity that was displayed when changing the alignment face in the Builder tab. (1703298)

2. Corrected the situation where when adding circular machining to a circular part, unconformity was displayed. (1703996)

1.60.15.3

Released Plugins

Plugin Accord 40 FX : 1.60.15.2
Plugin Ardis Cutting Optimizer : 1.60.15.2
Plugin Author200 : 1.60.15.3
Plugin Author327 : 1.60.15.3
Plugin Author436S : 1.60.15.3
Plugin Author500 : 1.60.15.3
Plugin AuthorM600 : 1.60.15.2
Plugin BHX050 : 1.60.15.2
Plugin BHX055 : 1.60.15.2
Plugin BHX500 : 1.60.15.2
Plugin Biesse EKO 902 : 1.60.15.2
Plugin Biesse FTT : 1.60.15.2
Plugin Biesse Rover 24 : 1.60.15.2
Plugin Biesse Rover A4 : 1.60.15.2
Plugin Biesse Rover B7 : 1.60.15.2
Plugin Biesse Skill 300 K3 : 1.60.15.2
Plugin BMG110 - Venture 113-114-115 : 1.60.15.2
Plugin Builder : 1.60.15.3
Plugin Builder Budget : 1.60.15.3
Plugin Builder Catalog : 1.60.15.3
Plugin Builder Parts : 1.60.15.3
Plugin Builder View : 1.60.15.2
Plugin Builder Xml : 1.60.15.2
Plugin Buselatto Jet Optima A20-C20-C21 : 1.60.15.2
Plugin C-Express 920 : 1.60.15.2
Plugin Corte Certo : 1.60.15.2
Plugin CRS Exata Vertical 1000 : 1.60.15.2
Plugin CRS Exata Vertical 1200 : 1.60.15.2
Plugin Cut List : 1.60.15.2
Plugin Cut Planning : 1.60.15.2
Plugin Cut Pro : 1.60.15.2
Plugin Cut Rite : 1.60.15.2
Plugin Cyflex 900 : 1.60.15.3
Plugin Cyflex 900BR : 1.60.15.3
Plugin Cyflex H800 : 1.60.15.2
Plugin Cyflex HP - CX200 : 1.60.15.3
Plugin Cyflex S e SR : 1.60.15.3
Plugin de Relatório de Perfil : 1.60.15.2
Plugin DRILLTEQ V-200 : 1.60.15.2
Plugin Dynestic 7516 : 1.60.15.2
Plugin Easy Jet : 1.60.15.2
Plugin Easynest 3018 A : 1.60.15.2
Plugin Easynest 3021 : 1.60.15.2
Plugin Easynest 4021 : 1.60.15.2
Plugin Evolution 7405 : 1.60.15.3
Plugin Exata Horizontal : 1.60.15.2
Plugin F9L : 1.60.15.2
Plugin Felder Creator 950 : 1.60.15.2
Plugin Flexdrill 1000 : 1.60.15.2
Plugin Flexdrill 1200 : 1.60.15.2
Plugin Flexdrill 61200 : 1.60.15.2
Plugin Format4 Profit H08 : 1.60.15.2
Plugin Format4 Profit H20-H22-H22L : 1.60.15.2
Plugin Giben Flat (BDT - Spectra) : 1.60.15.2
Plugin Giben Flat (Selexx - Professional Line - Stratos) : 1.60.15.2
Plugin Giben Genesis EVO : 1.60.15.3
Plugin GPlan : 1.60.15.2
Plugin Hirzt F10 : 1.60.15.2
Plugin Hirzt F6 : 1.60.15.2
Plugin Hirzt F8 : 1.60.15.2
Plugin Holzher Evolution 7401-7402 : 1.60.15.3
Plugin Holzher Master : 1.60.15.2
Plugin IF-850 Plus : 1.60.15.2
Plugin IF-8500 : 1.60.15.3
Plugin IMA Imagic : 1.60.15.3
Plugin Integrador WPS - ERP : 1.60.15.2
Plugin IntegraÃ§Ã£o Promob ERP Start : 1.60.15.2
Plugin Integração ERP Padrão : 1.60.15.2
Plugin Integração Focco : 1.60.15.2
Plugin Integração Insight ERP : 1.60.15.3
Plugin Integração Promob ERP : 1.60.15.2
Plugin Integração Promob Production : 1.60.15.3
Plugin ISO Code : 1.60.15.2
Plugin Lepton Optimizer : 1.60.15.2
Plugin M400F : 1.60.15.3
Plugin Masterwood Nesting MW : 1.60.15.2
Plugin MasterWood Project 415 : 1.60.15.2
Plugin MasterWood Project 465 : 1.60.15.2
Plugin Morbidelli M100 : 1.60.15.3
Plugin OptiPlanning : 1.60.15.2
Plugin Otimizador de Corte Holzher HHOS : 1.60.15.2
Plugin Ottimo-Perfect Cut : 1.60.15.2
Plugin Point 2 : 1.60.15.2
Plugin Pratika 310 : 1.60.15.3
Plugin Pratika 315 : 1.60.15.3
Plugin Pratika 320 : 1.60.15.3
Plugin Pratika 325 : 1.60.15.3
Plugin PratixS : 1.60.15.3
Plugin Project 250 : 1.60.15.2
Plugin Project 450 : 1.60.15.2
Plugin Project TF : 1.60.15.2
Plugin PTP : 1.60.15.2
Plugin PTP 160 : 1.60.15.2
Plugin Relatorio para Separação de Almoxarifado : 1.60.15.2
Plugin Relatório de Aplicação de Lâmina por Módulo : 1.60.15.2
Plugin Relatório de Bordas : 1.60.15.2
Plugin Relatório de Corpo de Gavetas : 1.60.15.2
Plugin Relatório de Fabricação por Componente : 1.60.15.2
Plugin Relatório de Fabricação por Módulo : 1.60.15.2
Plugin Relatório de Itens Montados : 1.60.15.2
Plugin Relatório de Montagem Steel : 1.60.15.2
Plugin Relatório de Portas : 1.60.15.2
Plugin Relatório de Tamburatos : 1.60.15.2
Plugin Relatório para Compra de Materiais : 1.60.15.2
Plugin Router EnRouter CNC : 1.60.15.3
Plugin Rover A 1332 : 1.60.15.2
Plugin Rover A 1625-1632-1643-1659 : 1.60.15.2
Plugin Rover A 3.30 : 1.60.15.2
Plugin Rover C9 : 1.60.15.2
Plugin Rover1836GFT : 1.60.15.2
Plugin Rover20 : 1.60.15.2
Plugin Rover2231GFT : 1.60.15.2
Plugin SCM Startech cn v : 1.60.15.2
Plugin Skipper 100 : 1.60.15.2
Plugin Skipper 130 : 1.60.15.2
Plugin Skipper V31 : 1.60.15.2
Plugin Spazio3D : 1.60.15.2
Plugin Startech : 1.60.15.2
Plugin Tech 99L : 1.60.15.2
Plugin Tech Z1 : 1.60.15.3
Plugin Tech Z2 : 1.60.15.3
Plugin Tech Z25 : 1.60.15.3
Plugin Tech Z30 : 1.60.15.3
Plugin Tech Z5 : 1.60.15.3
Plugin Twister750NX : 1.60.15.2
Plugin Uniflex : 1.60.15.3
Plugin Universal NB-3618 : 1.60.15.3
Plugin Universal NB-3622 : 1.60.15.3
Plugin Universal TV 3615 : 1.60.15.3
Plugin Vantage 24-25-26 series - Nesting : 1.60.15.2
Plugin Venture 107 : 1.60.15.2
Plugin Venture 108 : 1.60.15.2
Plugin Venture 1M : 1.60.15.2
Plugin Venture 22L : 1.60.15.2
Plugin Venture 2M : 1.60.15.2
Plugin Venture 316 : 1.60.15.2
Plugin Venture 3M : 1.60.15.2
Plugin Venture 8M : 1.60.15.2
Plugin Vetor Opus : 1.60.15.2
Plugin Vitap Point K2 : 1.60.15.2
Plugin Weeke BHC280 : 1.60.15.2
Plugin Weeke Optimat BHC250 : 1.60.15.2
Plugin WIBJ5 : 1.60.15.2
Plugin WPS Optimizer : 1.60.15.2

Enhancements

Project TF100
1. Added machining option to the Project TF100 Machine Plugin. (1433484)

Edge Band
1. Created the EdgebandCondition attribute that will validate the visibility condition of the edge band and will display correctly in the 3D environment. Available from version 5.60.15.54 of Promob . For more information click here.

Plugin ISO, Plugin Startech cn v
1. Adicionada opções para controle da sincronização de configurações para novas máquinas. (1663267)

Plugin EnRoute
1. Created a layer in the DXF generated by the EnRoute Plugin for small parts. For more information, click here.

Plugin ISO
1. Available in the ISO Plugin - Nesting Program with Cut Pro plan.

Builder
1. The Builder was translated into Chinese.

Corrections

Manufacturing Report by Module
1. Corrected the situation where the components of composed panel were duplicated in the manufacturing report by Module. (1685148)

Cut Report
1. Corrected the situation in which when generating integration of the .csv file through Promob Production, several items are generated incorrectly. (1684378)

Plugin Exata Vertical
1. Corrected the situation where the drill were improperly invalidated in the ExataVertical machine. (1686016)

SCM programs with Maestro
1. Corrected the situation where there was no option for the depth of the passes in small pieces with Superior Conductor in NB-3618. (1685319)

Builder Tab
1. Fixed the unconformity that was displayed when accessing the Builder tab. (1691684)
2. Corrected the situation where it was not possible to insert the letter "P" in the registration fields to search for attributes of the Parent item, in the Builder tab. (1691603)

Nesting
1. Corrected the situation in which when generating files by material, the files were generated with the materials mixed in Pratik S. (1694888)
2. Corrected the situation when generating a project for Universal NB3618, some parts were not generated in the .csv file. (1694691)

Cut Pro | Production materials registration window
1. Corrected the non-conformity that was displayed when validating wildcard materials when Catalog3D materials exist. (1695720)

1.60.15.2

Released Plugins

Plugin Author200 : 1.60.15.2

Plugin Author327 : 1.60.15.2

Plugin Author436S : 1.60.15.2

Plugin Author500 : 1.60.15.2

Plugin Builder : 1.60.15.2

Plugin Builder Budget : 1.60.15.2

Plugin Builder Catalog : 1.60.15.2

Plugin Builder Parts : 1.60.15.2

Plugin Cyflex 900 : 1.60.15.2

Plugin Cyflex 900BR : 1.60.15.2

Plugin Cyflex HP - CX200 : 1.60.15.2

Plugin Cyflex S e SR : 1.60.15.2

Plugin Evolution 7405 : 1.60.15.2

Plugin Giben Genesis EVO : 1.60.15.2

Plugin Holzher Evolution 7401-7402 : 1.60.15.2

Plugin IF-8500 : 1.60.15.2

Plugin IMA Imagic : 1.60.15.2

Plugin Integração Insight ERP : 1.60.15.2

Plugin Integração Promob Production : 1.60.15.2

Plugin M400F : 1.60.15.2

Plugin Morbidelli M100 : 1.60.15.2

Plugin Pratika 310 : 1.60.15.2

Plugin Pratika 315 : 1.60.15.2

Plugin Pratika 320 : 1.60.15.2

Plugin Pratika 325 : 1.60.15.2

Plugin PratixS : 1.60.15.2

Plugin Router EnRouter CNC : 1.60.15.2

Plugin Tech Z1 : 1.60.15.2

Plugin Tech Z2 : 1.60.15.2

Plugin Tech Z25 : 1.60.15.2

Plugin Tech Z30 : 1.60.15.2

Plugin Tech Z5 : 1.60.15.2

Plugin Uniflex : 1.60.15.2

Plugin Universal NB-3618 : 1.60.15.2

Plugin Universal NB-3622 : 1.60.15.2

Plugin Universal TV 3615 : 1.60.15.2

Enhancements

Budget
1. Changed the path that is saved the local dynamic structure.

SCM Machine
1. Added suction command on machines with integration with Maestro Superior. For more information click here.

Corrections

BHX055
1. Corrected the low performance situation when generating integration with Worker. (1668046)

Nesting
1. Inserted the Park Command in the profile folder files. For more information click here.
2. Corrected the situation in which when changing the Align by face field, and the files in the Nesting folder remained the same. (1674526)
3. Corrected the situation where the machining was configured to start in the middle of the edge, but it only occurred in the individual parts of the parts folder, in the others it continued to start at the vertex. (1677057)
4. Corrected the situation where indifferent to the registered tab, in the .csv the "-" tab was always displayed. (1683486)

Enroute
1. Fixed missing and wrong holes in the EnRouter CNC plugin. (1673621)
2. Corrected the situation where operations on two sides were generated in an A file with operations on both sides in the same file in the EnRoute plugin. (1676601)

Máquinas SCM
1. Fixed situation where even with the option to generate finished parts enabled it still generated a drill in the face even containing top drills. (1674011)

Budget
1. Corrected the unconformity that was displayed when generating budget. (1675289)

Machining and Slot Processe
1. Corrected the unconformity "the sequence contains no elements" in Pratika 310. (1672299)

CyflexHP-CX200 Machining Machine
1. Corrected the situation where the double pass configured in Cyflex HP - CX200 was not performed. (1671516)

Plugin Inmes IF-8500
1. Fixed situation where when generating slote of the whole project, some sides incorrectly generated the .inf files informing "The slot has a depth of 9mm, greater than 9mm, the maximum allowed by the machine" in the Inmes IF-8500 plugin. ( 1676201)

Maestro Superior Machine Configurations
1. Corrected the situation in which the Align by Face field was altered improperly when closing the CNC settings by selecting Do not save changes. (1676647)

Promob Worker
1. Fixed situation where Update searched for the same update every time it was started, Builder.Budget and Worker 6.60.0.4.

Edge Band
1. Corrected unconformity that was displayed when generating the technical drawing of parts that were geometries. (1679631)
2. Corrected unconformity that was displayed when generating budget. (1680999)

Edge Band Registration
1. Corrected the unconformity that was displayed when editing the part in Builder Parts. (1679232)
2. Adjustment of all fields / options to have Builder Parts function. (1679228)

Load items in 3D environment
1. Fixed the situation where Promob stopped working unexpectedly. (1680659)

Cutting plan and machine programs
1. Corrected the situation where an item generated in previous versions was not generated in version 1.60.14.24. For more information click here. (1683046)

Plugin Universal NB-3618
1. Fixed the situation where it was not possible to determine the depth of the last pass for small parts on nB-3618. (1685319)

1.60.15.1

Released Plugins

Plugin Accord 40 FX : 1.60.15.1
Plugin Ardis Cutting Optimizer : 1.60.15.1
Plugin Author200 : 1.60.15.1
Plugin Author327 : 1.60.15.1
Plugin Author436S : 1.60.15.1
Plugin Author500 : 1.60.15.1
Plugin AuthorM600 : 1.60.15.1
Plugin BHX050 : 1.60.15.1
Plugin BHX055 : 1.60.15.1
Plugin BHX500 : 1.60.15.1
Plugin Biesse EKO 902 : 1.60.15.1
Plugin Biesse FTT : 1.60.15.1
Plugin Biesse Rover 24 : 1.60.15.1
Plugin Biesse Rover A4 : 1.60.15.1
Plugin Biesse Rover B7 : 1.60.15.1
Plugin Biesse Skill 300 K3 : 1.60.15.1
Plugin BMG110 - Venture 113-114-115 : 1.60.15.1
Plugin Builder : 1.60.15.1
Plugin Builder Budget : 1.60.15.1
Plugin Builder Catalog : 1.60.15.1
Plugin Builder Parts : 1.60.15.1
Plugin Builder View : 1.60.15.1
Plugin Builder Xml : 1.60.15.1
Plugin Buselatto Jet Optima A20-C20-C21 : 1.60.15.1
Plugin C-Express 920 : 1.60.15.1
Plugin Corte Certo : 1.60.15.1
Plugin CRS Exata Vertical 1000 : 1.60.15.1
Plugin CRS Exata Vertical 1200 : 1.60.15.1
Plugin Cut List : 1.60.15.1
Plugin Cut Planning : 1.60.15.1
Plugin Cut Pro : 1.60.15.1
Plugin Cut Rite : 1.60.15.1
Plugin Cyflex 900 : 1.60.15.1
Plugin Cyflex 900BR : 1.60.15.1
Plugin Cyflex H800 : 1.60.15.1
Plugin Cyflex HP - CX200 : 1.60.15.1
Plugin Cyflex S e SR : 1.60.15.1
Plugin de Relatório de Perfil : 1.60.15.1
Plugin DRILLTEQ V-200 : 1.60.15.1
Plugin Dynestic 7516 : 1.60.15.1
Plugin Easy Jet : 1.60.15.1
Plugin Easynest 3018 A : 1.60.15.1
Plugin Easynest 3021 : 1.60.15.1
Plugin Easynest 4021 : 1.60.15.1
Plugin Evolution 7405 : 1.60.15.1
Plugin Exata Horizontal : 1.60.15.1
Plugin F9L : 1.60.15.1
Plugin Felder Creator 950 : 1.60.15.1
Plugin Flexdrill 1000 : 1.60.15.1
Plugin Flexdrill 1200 : 1.60.15.1
Plugin Flexdrill 61200 : 1.60.15.1
Plugin Format4 Profit H08 : 1.60.15.1
Plugin Format4 Profit H20-H22-H22L : 1.60.15.1
Plugin Giben Flat (BDT - Spectra) : 1.60.15.1
Plugin Giben Flat (Selexx - Professional Line - Stratos) : 1.60.15.1
Plugin Giben Genesis EVO : 1.60.15.1
Plugin GPlan : 1.60.15.1
Plugin Hirzt F10 : 1.60.15.1
Plugin Hirzt F6 : 1.60.15.1
Plugin Hirzt F8 : 1.60.15.1
Plugin Holzher Evolution 7401-7402 : 1.60.15.1
Plugin Holzher Master : 1.60.15.1
Plugin IF-850 Plus : 1.60.15.1
Plugin IF-8500 : 1.60.15.1
Plugin IMA Imagic : 1.60.15.1
Plugin Integrador WPS - ERP : 1.60.15.1
Plugin Integração ERP Padrão : 1.60.15.1
Plugin Integração Focco : 1.60.15.1
Plugin Integração Insight ERP : 1.60.15.1
Plugin Integração Promob ERP : 1.60.15.1
Plugin Integração Promob ERP Start : 1.60.15.1
Plugin Integração Promob Production : 1.60.15.1
Plugin ISO Code : 1.60.15.1
Plugin Lepton Optimizer : 1.60.15.1
Plugin M400F : 1.60.15.1
Plugin Masterwood Nesting MW : 1.60.15.1
Plugin MasterWood Project 415 : 1.60.15.1
Plugin MasterWood Project 465 : 1.60.15.1
Plugin Morbidelli M100 : 1.60.15.1
Plugin OptiPlanning : 1.60.15.1
Plugin Otimizador de Corte Holzher HHOS : 1.60.15.1
Plugin Ottimo-Perfect Cut : 1.60.15.1
Plugin Point 2 : 1.60.15.1
Plugin Pratika 310 : 1.60.15.1
Plugin Pratika 315 : 1.60.15.1
Plugin Pratika 320 : 1.60.15.1
Plugin Pratika 325 : 1.60.15.1
Plugin PratixS : 1.60.15.1
Plugin Project 250 : 1.60.15.1
Plugin Project 450 : 1.60.15.1
Plugin Project TF : 1.60.15.1
Plugin PTP : 1.60.15.1
Plugin PTP 160 : 1.60.15.1
Plugin Relatorio para Separação de Almoxarifado : 1.60.15.1
Plugin Relatório de Aplicação de Lâmina por Módulo : 1.60.15.1
Plugin Relatório de Bordas : 1.60.15.1
Plugin Relatório de Corpo de Gavetas : 1.60.15.1
Plugin Relatório de Fabricação por Componente : 1.60.15.1
Plugin Relatório de Fabricação por Módulo : 1.60.15.1
Plugin Relatório de Itens Montados : 1.60.15.1
Plugin Relatório de Montagem Steel : 1.60.15.1
Plugin Relatório de Portas : 1.60.15.1
Plugin Relatório de Tamburatos : 1.60.15.1
Plugin Relatório para Compra de Materiais : 1.60.15.1
Plugin Router EnRouter CNC : 1.60.15.1
Plugin Rover A 1332 : 1.60.15.1
Plugin Rover A 1625-1632-1643-1659 : 1.60.15.1
Plugin Rover A 3.30 : 1.60.15.1
Plugin Rover C9 : 1.60.15.1
Plugin Rover1836GFT : 1.60.15.1
Plugin Rover20 : 1.60.15.1
Plugin Rover2231GFT : 1.60.15.1
Plugin SCM Startech cn v : 1.60.15.1
Plugin Skipper 100 : 1.60.15.1
Plugin Skipper 130 : 1.60.15.1
Plugin Skipper V31 : 1.60.15.1
Plugin Spazio3D : 1.60.15.1
Plugin Startech : 1.60.15.1
Plugin Tech 99L : 1.60.15.1
Plugin Tech Z1 : 1.60.15.1
Plugin Tech Z2 : 1.60.15.1
Plugin Tech Z25 : 1.60.15.1
Plugin Tech Z30 : 1.60.15.1
Plugin Tech Z5 : 1.60.15.1
Plugin Twister750NX : 1.60.15.1
Plugin Uniflex : 1.60.15.1
Plugin Universal NB-3618 : 1.60.15.1
Plugin Universal NB-3622 : 1.60.15.1
Plugin Universal TV 3615 : 1.60.15.1
Plugin Vantage 24-25-26 series - Nesting : 1.60.15.1
Plugin Venture 107 : 1.60.15.1
Plugin Venture 108 : 1.60.15.1
Plugin Venture 1M : 1.60.15.1
Plugin Venture 22L : 1.60.15.1
Plugin Venture 2M : 1.60.15.1
Plugin Venture 316 : 1.60.15.1
Plugin Venture 3M : 1.60.15.1
Plugin Venture 8M : 1.60.15.1
Plugin Vetor Opus : 1.60.15.1
Plugin Vitap Point K2 : 1.60.15.1
Plugin Weeke BHC280 : 1.60.15.1
Plugin Weeke Optimat BHC250 : 1.60.15.1
Plugin WIBJ5 : 1.60.15.1
Plugin WPS Optimizer : 1.60.15.1

Enhancements

Cut Plan Configuration Logs
1. Added Configuration Logs for changing Cutting Plans. For more information click here.

Builder | Promob
1. Adjusted compatibility between Plugin Builder and Promob 5.60.10.46.

Insight Integration
1. Translations of the item descriptions are available in Insight integration XML. For more information, click here.

Corrections

Plugin Cut Pro
1. Corrected the situation where the positions of the operations were incorrect when exporting the offset parts in Plugin Cut Pro. (1667922)

Promob Opening
1. Fixed the unconformity with the message "A file could not be read" that was displayed when starting Promob. (1676805)

CutList Plugin
1. Fixed situation where the Generate Images setting was not enabled if the generation was configured for .TXT files.

Plugin Router Enroute | Nesting
1. Corrected the situation where the Router Enroute machine generated the Nesting .dxt file incorrectly. (1669823)

Machines | Nesting
1. Corrected the situation where the "Generate finished parts" functionality did not generate the Nesting machine programs correctly. (1674011)

Drawings | Reports | Labels
1. Corrected the situation where reports and technical drawings did not display the numerical values on the print page. (1674216)

1.60.14.24

Released Plugins

Plugin Builder : 1.60.14.24

Plugin Builder Budget : 1.60.14.21

Plugin Builder Catalog : 1.60.14.22

Plugin Builder Parts : 1.60.14.19

Plugin Cut List : 1.60.14.2

Plugin Cyflex 900BR : 1.60.14.16

Plugin Cyflex S e SR : 1.60.14.20

Plugin Evolution 7405 : 1.60.14.20

Plugin Giben Genesis EVO : 1.60.14.15

Plugin Holzher Evolution 7401-7402 : 1.60.14.20

Plugin IMA Imagic : 1.60.14.23

Plugin Integração Insight ERP : 1.60.14.16

Plugin Integração Promob ERP : 1.60.14.17

Plugin Integração Promob Production : 1.60.14.21

Plugin MasterWood Project 415 : 1.60.14.2

Plugin MasterWood Project 465 : 1.60.14.2

Plugin Morbidelli M100 : 1.60.14.15

Plugin Router EnRouter CNC : 1.60.14.17

Plugin SCM Startech cn v : 1.60.14.25

Enhancements

Tecnical draws
1. Technical drawings will be generated using the measurement unit selected in the Promob settings.

Plugin ISO
1. Inserted a field to define the ISO Plugin program generation engine.

Morbidelli Group machine programs
1. Added possibility of zero points on machines of the Morbidelli group. For more information, click here.

Integration | Budget | Cutting plan
1. Created an attribute to control the execution of the BUILDERCUTOPERATION cutting operation. For more information click here.

Plugins

1. Inserted the Startech cn v plugin.

Corrections

Technical Drawings | Reports | Cutting Optimizers | Nesting | Integration
1. Corrected the situation where the finishes were displayed as a wildcard incorrectly. (1656893)

Assembled Items Report
1. Items with Builderoperation = Group attribute were not sent to the assembled item report. (1661229)

Plugin ISO
1. Paused the synchronization of the ISO Plugin settings with the cloud.

Cutting plan
1. Corrected the unconformity that was shown when generating the Cut Pro drumming plan. (1662063)

Nesting | Drill
1. Corrected the situation where the Enroute plugin generated scattered sides. (1663805)

Cyflex900BR
1. Corrected the situation where it was not saved the change in the Position setting of the suction hood in Cyflex 900BR. (1665531)

ERP Start Integration
1. Corrected the situation where the TIPO_PRODUTO attribute was not displayed in the ERPStart integration xml.

Integration | BHX055 Machine
1. Fixed low performance situation when generating ERP integration. (1666910)

Machine programs | Machining
1. Corrected the situation where Weeke BHC280 did not generate in the Registered Operations Order. (1666624)

Labels | Machine Programs | Technical drawing
1. Fixed situation where when generating ERP integration the message "Remote server returned an error" was displayed: (502) Incorrect Gateway - Label Service". (1668226)

Project 415 | Project 465
1.Fixed the situation where I was not loading the Project415 and Project465 plugins at opening.

Offset
1. Corrected the situation where the overcorrection was not applied correctly to the oblique pieces. (1659925)

ERP Integration
1. Fixed situation where migration from ERP Start plugin to ERP plugin did not occur. (1668867)

Operations Register
1. Corrected the situation where it was allowed to insert a nonexistent attribute, now a warning message is displayed when this happens. (1583083)

Plugin Cut List
1. Fixed situation where Cut List plugin generated incorrect quantity of items.

Production Integration
1. Corrected the situation where the attribute "Fabric Order" was not validated in the integration with Production.

Tecnical draws
1. Corrected the situation where the zero values were not shown in the technical drawings.

1.60.14.23

Released Plugins

Plugin Accord 40 FX : 1.60.14.15
Plugin Ardis Cutting Optimizer : 1.60.14.14
Plugin Author200 : 1.60.14.15
Plugin Author327 : 1.60.14.15
Plugin Author436S : 1.60.14.15
Plugin Author500 : 1.60.14.15
Plugin AuthorM600 : 1.60.14.15
Plugin BHX050 : 1.60.14.13
Plugin BHX055 : 1.60.14.15
Plugin BHX500 : 1.60.14.12
Plugin Biesse EKO 902 : 1.60.14.16
Plugin Biesse Rover 24 : 1.60.14.12
Plugin Biesse Rover A4 : 1.60.14.12
Plugin Biesse Rover B7 : 1.60.14.13
Plugin Biesse Skill 300 K3 : 1.60.14.12
Plugin BMG110 - Venture 113-114-115 : 1.60.14.13
Plugin Builder : 1.60.14.23
Plugin Builder Budget : 1.60.14.20
Plugin Builder Catalog : 1.60.14.21
Plugin Builder Parts : 1.60.14.18
Plugin Builder Xml : 1.60.14.11
Plugin C-Express 920 : 1.60.14.13
Plugin Corte Certo : 1.60.14.13
Plugin CRS Exata Vertical 1000 : 1.60.14.12
Plugin CRS Exata Vertical 1200 : 1.60.14.12
Plugin CRS Exata Horizontal – Centro de Furação: 1.60.14.11
Plugin Cut List : 1.60.14.1
Plugin Cut Planning : 1.60.14.12
Plugin Cut Pro : 1.60.14.16
Plugin Cut Rite : 1.60.14.14
Plugin Cyflex 900 : 1.60.14.15
Plugin Cyflex 900BR : 1.60.14.15
Plugin Cyflex H800 : 1.60.14.11
Plugin Cyflex HP - CX200 : 1.60.14.14
Plugin Cyflex S e SR : 1.60.14.19
Plugin DRILLTEQ V-200 : 1.60.14.22
Plugin Dynestic 7516 : 1.60.14.12
Plugin Easy Jet : 1.60.14.15
Plugin Easynest 3018 A : 1.60.14.12
Plugin Easynest 3021 : 1.60.14.12
Plugin Easynest 4021 : 1.60.14.12
Plugin Evolution 7405 : 1.60.14.19
Plugin Exata Horizontal : 1.60.14.12
Plugin F9L : 1.60.14.11
Plugin Flexdrill 1000 : 1.60.14.13
Plugin Flexdrill 1200 : 1.60.14.10
Plugin Flexdrill 61200 : 1.60.14.11
Plugin Format4 Profit H08 : 1.60.14.13
Plugin Format4 Profit H20-H22-H22L : 1.60.14.12
Plugin Giben Genesis EVO : 1.60.14.14
Plugin GPlan : 1.60.14.13
Plugin Holzher Evolution 7401-7402 : 1.60.14.19
Plugin IF-850 Plus : 1.60.14.13
Plugin IF-8500 : 1.60.14.12
Plugin IMA Imagic : 1.60.14.22
Plugin Integrador WPS - ERP : 1.60.14.14
Plugin Integração ERP Padrão : 1.60.14.16
Plugin Integração Insight ERP : 1.60.14.15
Plugin Integração Promob ERP : 1.60.14.16
Plugin Integração Promob ERP Start : 1.60.14.18
Plugin Integração Promob Production : 1.60.14.20
Plugin Lepton Optimizer: 1.60.14.14
Plugin M400F : 1.60.14.16
Plugin Masterwood Nesting MW : 1.60.14.12
Plugin MasterWood Project 415 : 1.60.14.1
Plugin MasterWood Project 465 : 1.60.14.1
Plugin Morbidelli M100 : 1.60.14.14
Plugin OptiPlanning : 1.60.14.14
Plugin Otimizador de Corte Holzher HHOS: 1.60.14.14
Plugin Ottimo-Perfect Cut : 1.60.14.13
Plugin Point 2 : 1.60.14.13
Plugin Pratika 310 : 1.60.14.15
Plugin Pratika 315 : 1.60.14.15
Plugin Pratika 320 : 1.60.14.16
Plugin Pratika 325 : 1.60.14.16
Plugin PratixS : 1.60.14.16
Plugin Project 250 : 1.60.14.12
Plugin Project 450 : 1.60.14.12
Plugin Project TF : 1.60.14.13
Plugin PTP : 1.60.14.12
Plugin PTP 160 : 1.60.14.13
Plugin Router EnRouter CNC : 1.60.14.16
Plugin Rover A 1332 : 1.60.14.12
Plugin Rover A 3.30 : 1.60.14.12
Plugin Rover C9 : 1.60.14.13
Plugin Rover1836GFT : 1.60.14.14
Plugin Rover20 : 1.60.14.12
Plugin Rover2231GFT : 1.60.14.14
Plugin Skipper 100 : 1.60.14.13
Plugin Skipper 130 : 1.60.14.13
Plugin Skipper V31 : 1.60.14.12
Plugin Startech : 1.60.14.12
Plugin Tech 99L : 1.60.14.12
Plugin Tech Z1 : 1.60.14.14
Plugin Tech Z2 : 1.60.14.14
Plugin Tech Z25 : 1.60.14.14
Plugin Tech Z30 : 1.60.14.14
Plugin Tech Z5 : 1.60.14.14
Plugin Uniflex : 1.60.14.15
Plugin Universal NB-3618 : 1.60.14.18
Plugin Universal NB-3622 : 1.60.14.16
Plugin Universal TV 3615 : 1.60.14.14
Plugin Vantage 24-25-26 series - Nesting : 1.60.14.13
Plugin Venture 107 : 1.60.14.13
Plugin Venture 108 : 1.60.14.13
Plugin Venture 1M : 1.60.14.13
Plugin Venture 22L : 1.60.14.13
Plugin Venture 2M : 1.60.14.12
Plugin Venture 316 : 1.60.14.13
Plugin Venture 3M : 1.60.14.13
Plugin Venture 8M : 1.60.14.13
Plugin Vetor Opus : 1.60.14.14
Plugin Weeke BHC280 : 1.60.14.13
Plugin Weeke Optimat BHC250 : 1.60.14.13
Plugin WIBJ5 : 1.60.14.12
Plugin WPS Optimizer : 1.60.14.12

Enhancements

Edge band registration

1. Available the Edge Band Reference, for more information click here.

Insight ERP integration

1. Available attributes and modules exporter for Insight ERP plugin.

measurement selected in the Promob settings.

Images for labels

1. The images for labels will be generated using the unit of measurement selected in the Promob settings.1. The images for labels will be generated using the unit of Promob.

Inmes IF-8500 Plugin Machine Programs

1. The minimum position for top holes on the Y axis has been increased from 15mm to 20mm on the Inmes IF-8500 Plugin.

New machines

1. New machine plugins available: Project 415 and 465L.

2. Cutting List plugin available.

SCM machine programs

1. Added new zero point alignment options when configured to perform Superior Maestro integration. For more information, click here.

Corrections

Offset

1. Corrected the situation that the offfset applied to parts with chamfers was incorrect. (1637184)

Bugdet

1. Corrected the situation in which the pieces with a Wildcard model were not budgeted after the link with the Builder material. (1649767)

Machine programs

1. Corrected the situation that the depth of contour machining was greater than the thickness of parts registered with the Plugin Builder Parts. (1656305)

2. Corrected the situation that Plugin PTP 160 did not allow the insertion of two different saws for tearing processes.

ERP Integration

1. Corrected the situation that the amount of hardware in the reports was different from the amount generated with the integrations. (1657683)

Edge band registration

CNC Configuration

1. Corrected the situation that was not saved the selection of the option Use cutting direction in operations of a line.

Operations Register

1. Corrected the situation where it was not allowed to save operation price with empty ID or description. (1551265)

Creation of Quotas

1. Corrected the situation where the standard was not followed in the selection of the part, or operation in the quota register. (1614879)

Builder Parts

1. Corrected the situation that it was allowed to create items in Builder Parts from doors and items with non-selectable geometries. (1656290)

1.60.14.21

Released Plugins

Plugin Accord 40 FX : 1.60.14.13

Plugin Ardis Cutting Optimizer : 1.60.14.13

Plugin Author200 : 1.60.14.13

Plugin Author327 : 1.60.14.13

Plugin Author436S : 1.60.14.13

Plugin Author500 : 1.60.14.13

Plugin AuthorM600 : 1.60.14.13

Plugin BHX050 : 1.60.14.11

Plugin BHX055 : 1.60.14.13

Plugin BHX500 : 1.60.14.10

Plugin Biesse EKO 902 : 1.60.14.14

Plugin Biesse FTT : 1.60.14.10

Plugin Biesse Rover 24 : 1.60.14.10

Plugin Biesse Rover A4 : 1.60.14.11

Plugin Biesse Rover B7 : 1.60.14.11

Plugin Biesse Skill 300 K3 : 1.60.14.10

Plugin BMG110 - Venture 113-114-115 : 1.60.14.11

Plugin Builder : 1.60.14.21

Plugin Builder Budget : 1.60.14.18

Plugin Builder Catalog : 1.60.14.19

Plugin Builder Parts : 1.60.14.16

Plugin Builder View : 1.60.14.10

Plugin Builder Xml : 1.60.14.10

Plugin Buselatto Jet Optima A20-C20-C21 : 1.60.14.10

Plugin C-Express 920 : 1.60.14.11

Plugin Corte Certo : 1.60.14.12

Plugin CRS Exata Vertical 1000 : 1.60.14.10

Plugin CRS Exata Vertical 1200 : 1.60.14.10

Plugin Cut Planning : 1.60.14.11

Plugin Cut Pro : 1.60.14.15

Plugin Cut Rite : 1.60.14.13

Plugin Cyflex 900 : 1.60.14.13

Plugin Cyflex 900BR : 1.60.14.13

Plugin Cyflex H800 : 1.60.14.10

Plugin Cyflex HP - CX200 : 1.60.14.12

Plugin Cyflex S e SR : 1.60.14.17

Plugin de Relatório de Perfil : 1.60.14.10

Plugin DRILLTEQ V-200 : 1.60.14.20

Plugin Dynestic 7516 : 1.60.14.10

Plugin Easy Jet : 1.60.14.13

Plugin Easynest 3018 A : 1.60.14.10

Plugin Easynest 3021 : 1.60.14.10

Plugin Easynest 4021 : 1.60.14.10

Plugin Evolution 7405 : 1.60.14.17

Plugin Exata Horizontal : 1.60.14.10

Plugin F9L : 1.60.14.10

Plugin Felder Creator 950 : 1.60.14.10

Plugin Flexdrill 1000 : 1.60.14.11

Plugin Flexdrill 1200 : 1.60.14.8

Plugin Flexdrill 61200 : 1.60.14.9

Plugin Format4 Profit H08 : 1.60.14.11

Plugin Format4 Profit H20-H22-H22L : 1.60.14.10

Plugin Giben Flat (BDT - Spectra) : 1.60.14.10

Plugin Giben Flat (Selexx - Professional Line - Stratos) : 1.60.14.10

Plugin Giben Genesis EVO : 1.60.14.12

Plugin GPlan : 1.60.14.12

Plugin Hirzt F10 : 1.60.14.10

Plugin Hirzt F6 : 1.60.14.10

Plugin Hirzt F8 : 1.60.14.10

Plugin Holzher Evolution 7401-7402 : 1.60.14.17

Plugin Holzher Master : 1.60.14.10

Plugin IF-850 Plus : 1.60.14.11

Plugin IF-8500 : 1.60.14.10

Plugin IMA Imagic : 1.60.14.20

Plugin Integrador WPS - ERP : 1.60.14.12

Plugin Integração ERP Padrão : 1.60.14.14

Plugin Integração Focco : 1.60.14.10

Plugin Integração Insight ERP : 1.60.14.13

Plugin Integração Promob ERP : 1.60.14.14

Plugin Integração Promob ERP Start : 1.60.14.16

Plugin Integração Promob Production : 1.60.14.18

Plugin ISO Code : 1.60.14.20

Plugin Lepton Optimizer : 1.60.14.13

Plugin M400F : 1.60.14.14

Plugin Masterwood Nesting MW : 1.60.14.10

Plugin Morbidelli M100 : 1.60.14.12

Plugin OptiPlanning : 1.60.14.13

Plugin Otimizador de Corte Holzher HHOS : 1.60.14.13

Plugin Ottimo-Perfect Cut : 1.60.14.12

Plugin Point 2 : 1.60.14.12

Plugin Pratika 310 : 1.60.14.13

Plugin Pratika 315 : 1.60.14.13

Plugin Pratika 320 : 1.60.14.14

Plugin Pratika 325 : 1.60.14.14

Plugin PratixS : 1.60.14.14

Plugin Project 250 : 1.60.14.10

Plugin Project 450 : 1.60.14.10

Plugin Project TF : 1.60.14.11

Plugin PTP : 1.60.14.10

Plugin PTP 160 : 1.60.14.11

Plugin Relatorio para Separação de Almoxarifado : 1.60.14.10

Plugin Relatório de Aplicação de Lâmina por Módulo : 1.60.14.10

Plugin Relatório de Bordas : 1.60.14.10

Plugin Relatório de Corpo de Gavetas : 1.60.14.4

Plugin Relatório de Fabricação por Componente : 1.60.14.10

Plugin Relatório de Fabricação por Módulo : 1.60.14.10

Plugin Relatório de Itens Montados : 1.60.14.10

Plugin Relatório de Montagem Steel : 1.60.14.10

Plugin Relatório de Portas : 1.60.14.8

Plugin Relatório de Tamburatos : 1.60.14.10

Plugin Relatório para Compra de Materiais : 1.60.14.10

Plugin Router EnRouter CNC : 1.60.14.14

Plugin Rover A 1332 : 1.60.14.10

Plugin Rover A 1625-1632-1643-1659 : 1.60.14.21

Plugin Rover A 3.30 : 1.60.14.10

Plugin Rover C9 : 1.60.14.11

Plugin Rover1836GFT : 1.60.14.12

Plugin Rover20 : 1.60.14.10

Plugin Rover2231GFT : 1.60.14.12

Plugin Skipper 100 : 1.60.14.11

Plugin Skipper 130 : 1.60.14.11

Plugin Skipper V31 : 1.60.14.10

Plugin Spazio3D : 1.60.14.13

Plugin Startech : 1.60.14.11

Plugin Tech 99L : 1.60.14.10

Plugin Tech Z1 : 1.60.14.12

Plugin Tech Z2 : 1.60.14.12

Plugin Tech Z25 : 1.60.14.12

Plugin Tech Z30 : 1.60.14.12

Plugin Tech Z5 : 1.60.14.12

Plugin Twister750NX : 1.60.14.10

Plugin Uniflex : 1.60.14.13

Plugin Universal NB-3618 : 1.60.14.16

Plugin Universal NB-3622 : 1.60.14.14

Plugin Universal TV 3615 : 1.60.14.12

Plugin Vantage 24-25-26 series - Nesting : 1.60.14.11

Plugin Venture 107 : 1.60.14.11

Plugin Venture 108 : 1.60.14.11

Plugin Venture 1M : 1.60.14.11

Plugin Venture 22L : 1.60.14.11

Plugin Venture 2M : 1.60.14.11

Plugin Venture 316 : 1.60.14.11

Plugin Venture 3M : 1.60.14.11

Plugin Venture 8M : 1.60.14.11

Plugin Vetor Opus : 1.60.14.12

Plugin Vitap Point K2 : 1.60.14.11

Plugin Weeke BHC280 : 1.60.14.11

Plugin Weeke Optimat BHC250 : 1.60.14.11

Plugin WIBJ5 : 1.60.14.10

Plugin WPS Optimizer : 1.60.14.11

Enhancements:

Machines

1. Adjustment of the hole depth to not be larger than the part. (1625883)

Work Area Settings

1. Saving desktop settings in the cloud for dynamic machines.1. Saving desktop settings in the cloud for dynamic machines.

Machine Programs

1. Added the option to define the zero point of the work areas. For more information, click here.1. Added the option to define the zero point of the work areas. For more information, click here.

Corrections

Reports