Available from version 1.60.22.1 of Builder.
IMPORTANT: This feature is available for Rover and Skipper machines and will be made available for others as needed (if it is not available, please consult Promob Support for more information).
The BiesseWorks software, from the manufacturer Biesse, allows selecting different origins for program positioning on the machine.
For this to work according to the needs of each customer/machine, it is necessary for the programs to be rotated to the desired origin point.
Check below how the configuration of Reference Points should be done and its result in .BPP (Biesse) programs.
Confira abaixo como deve ser feita a configuração dos Pontos de Referência e o resultado dela nos programas .BPP (Biesse).
Configuration
1. Access the CNC Settings.
2. Go to the Setups tab of the desired machine and locate the Reference Point configuration, using the search bar if necessary.
Image
3. The available options will be displayed (Bottom left | Top right), select the desired one and save the settings.
Program generation
Check out the example of the piece with the technical drawing below.
The alignment face of the piece is positioned on Face 2.
With the Bottom left option selected, the alignment face will be positioned according to the lower origin of the machine:
With the Top right option selected, the alignment face will be positioned according to the upper origin of the machine:
IMPORTANT: For the alignment face of the piece to be correctly positioned in the program, it is necessary for the Alignment by face configuration in the Setup not to be set to None. For more details, see the article: Builder - Face alignment.