The opening settings can be changed to make the opening in the design as real as possible.
To change the opening settings:
1. Access the Registry - Modules menu.
2. Select the item that contains the aperture applied in the Navigation Tree.
3. Choose the Opening tab on the Main tab.
4. Then, two types of setting changes can be made at opening.
The opening angle settings are used to adjust the simulation of the opening in 3D space.
Inversion of openings
The inversion of the opening of the door is related to the direction in which the door should open and if the item register has mirroring or inversion. To define an inverted opening on the axis, the value Y (Yes) must be entered in the Invert field.
Below is an example of the Right Door opening type with the Invert field filled in different ways.
IMPORTANT: For doors, the value registered in Inverter must be 0 (zero) not to invert, and 1 (one) to invert. For drawers and dumpers, the accepted values are Y and N.
The maximum opening of an item defines the amount of opening that should be applied to the module in relation to its normal position. To reset the maximum opening of a module, the value must be entered in the Maximum field.
IMPORTANT: When the Maximum field is blank, for Doors, the degree of opening will be 90.
Below is an example of the Right Door opening type with the Maximum field filled in different ways.
Changes in the axis of rotation are related to the axis defined by where the door must be rotated. To change the rotation axis of an opening, it is necessary to enter the value in the X, Y and Z coordinates according to the opening.
Below is an example of the type of Right Door opening with different changes in the X and Y axis:
5. After making the desired changes, click the Refresh icon in the header.