For panels with an identical cutting layout, we can use the Stack Panels tool.
The managers that support stacking are:
- OSI
- Máxima
- PC5100/PC6200
- PC7000
- GVision
- Presizing
- CADmatic
- ICut
- InmesCut (version 2.4)
- InmesCut Automatic (version 1.1)
- Ilenia
- MCS Evolution
- MaestroCut
- Maestro Active Cut
- Titanium
- Wincut
- WPS
Each manager has specific configurations. Below are some configuration examples for the ICut, MaestroCut, and Titanium managers.
ICut and Titanium
The calculation made to identify the number of panels that will be stacked at a time is given by the maximum measurement registered, divided by the thickness of the panel (Maximum stacking measure / Panel Thickness).
The maximum ICut and Titanium measurement are 60 mm, so if the panel to be cut is 22 mm thick it will be 60/22 = 2.72. Therefore, 2 panels stacked at a time.
Maestro
The Maestro manager has a limit of 6 panels per stack. Therefore, up to 6 panels will be stacked at a time.