Available from version 1.2.6.7 or higher.
It is possible to define which information will be sent for each tag in the part label information, which is forwarded to the print file.
To make this definition:
1. Go to Export Settings - Cutting Managers.
2. Select Inmes - InmesCut.
3. On the Labels tab, it is possible to select which information can be sent to the labels by selecting the fields available in the left column from the right column using the button .
To define which fields should be sent to the labels and their order, use the features:
- Arrows: selects which information should go on the label, moving the fields to the right column (column of selected fields).
- Delete: Deletes the field from the column of selected fields.
- Up arrow: moves the information to the top of the list. This field is used to sort the columns for printing.
- Down arrow: moves the information down the list. This field is used to sort the columns for printing.
- Group: groups the selected columns into just one column.
- Ungroup: ungroups, a grouped column.
- Refresh: returns to the standard order.
IMPORTANT:
- Some tags are only available for the 6-phase version of the Inmes Cut manager.
- The information that can be customized refers to the item information that is in the line of the file started by the <Part tag of the XML file. The following are the default tag names and their initial values:
|
Default Value |
Tag |
Versão Máquina Disponível |
|
Item ID and item description |
IDesc |
BOTH |
|
Item ID |
IIDesc |
BOTH |
| Client information | Client | BOTH |
| Part height | L |
BOTH |
| Part width | W | BOTH |
| Program code 1 | CNCProgram1 | BOTH |
| Program code 2 | CNCProgram2 | ONLY 6 PHASES |
| Finishing the upper edge banding | MatEdgeUp | BOTH |
| Finishing the lower edge banding | MatEdgeLo | BOTH |
|
Finishing the left edge banding |
MatEdgeL | BOTH |
| Finishing the right edge banding | MatEdgeR | BOTH |
| NONE | Misc1 | ONLY 6 PHASES |
| NONE | Misc2 | ONLY 6 PHASES |
To enable this feature, the following procedures must be followed:
1. Enable the Print part labels menu in the Configurator tab of the Cutting Manager.
2. Select the Labels tab.
3. Choose the columns you want to send the information to the labels.
4. For each chosen column, add for sending the information as the following image:
5. It is necessary to expand the column to choose the tag related to this field.
6. Define which tag this column will replace on the label.
7. After selecting the columns and referencing the desired tags, click Yes, then Close.
8. If the information is valid, it will be saved and sent to the integration file.
9. Click OK to confirm the Import Settings.
NOTES:
- The selected columns must have an associated tag; if they do not, a message will be fired when trying to save the information.
- Selected columns cannot have a tag that is already associated with another column; if this occurs, a message will be fired when trying to save the information.
- Columns that are not available for the selected version of the manager will not be saved.