Cut Pro - Usikraft Cutting Managers - WPS Follow

IMPORTANT: In the cutting manager, when choosing to trim the plate, it is crucial to ensure that the trim is always greater than the thickness of the saw in use. This applies to both the internal and external trim (registered on the plate). The machine manufacturer establishes this measure, which is essential for the correct functioning of the integration.

In the Configurator tab, make the following settings:

• File generation directory: select the location for creating the .wjob file and the MyTemplates folder containing the label layouts. If no location is specified, the file will be saved in the location indicated in the Location field on the Generate Documents screen.

Cutting Plane Configuration

• Cutting thickness (mm): defines the thickness of the saw, in millimeters, that makes the cut.
• Maximum cut length: sets the maximum possible cut length for the machine.
• Internal cutting thickness (mm): defines the thickness of the internal cutting. If you enter 0, the cutting plane will be generated without a trim.
• Waste in phase (mm): defines the remaining raw material at the end of the phase.
• Allowed phases: defines the maximum allowed number of phases to be used in the cutting manager.
• Maximum machine allowed phases: defines the maximum number of phases allowed for the cutting manager.
• Stacking maximum (mm): defines the maximum dimension, in millimeters, for stacking plates to make the cut.

• Plane zero point: Set the position of the zero point used by the machine manager.

• Print part labels: Select this option to generate shapes labels.
• Print remnant labels: Select this option to generate leftover labels.
• Model label item: defines the model of the label for the items to be printed when the cuts are generated.
• Model label remainder: defines the model of the label remainders to be printed during the generation of cuts.
• Size of the label: defines the size of the label for parts and remainders to be printed.